Response of selected drought tolerant wheat (Triticum aestivum L.) genotypes for agronomic traits and biochemical markers under drought-stressed and non-stressed conditions

ABSTRACT

Genetic improvement of wheat for drought tolerance can be achieved by developing suitable ideotypes with enhanced yield-response associated with agronomic traits and biochemical markers. The objective of this study was to determine drought response of elite drought tolerant wheat genotypes using agronomic and biochemical traits to select promising lines for breeding. Fourteen wheat genotypes selected from the International Maize and Wheat Improvement Center’s heat and drought tolerance nursery and one standard check variety were evaluated under drought-stressed (DS) and non-stressed (NS) conditions using a randomised complete block design in three replications. Significant (P?<?0.05) genotype, drought condition and genotype?×?drought condition interaction effect were detected for the tested traits suggesting differential response of genotype for selection. Grain yield positively correlated with sucrose (r?=?0.58; P?<?0.05), fructose (r?=?0.52; P?<?0.05) and total sugar (r?=?0.52; P?<?0.05) contents under NS condition and with sucrose (r?=?0.80; P?<?0.001), total sugar (r?=?0.84; P?<?0.001) content, proline content (r?=?0.74; P?<?0.001) and number of grains per spike (r?=?0.58; P?<?0.05) under DS condition. Genetically unrelated wheat genotypes such as SM04, SM19, SM29, SM32, SM45 and SM97 possessing key agronomic and biochemical traits were selected for cultivar development for drought-stressed environments.     

Assessment of terminal drought tolerance among elite wheat (Triticum aestivum L.) genotypes using selected agronomic and physiological traits

ABSTRACT

The selection response of wheat (Triticum aestivum L.) under water-limited condition can be enhanced through breeding novel genotypes possessing drought-adaptive and yield-related agronomic and physiological traits. The objective of this study was to evaluate terminal drought tolerance among bread wheat genotypes and select superior parents for breeding. Agronomic and physiological responses of 28 wheat lines were assessed under well-watered (WW) and terminal drought (TD) treatments using a 7?×?4 alpha-lattice design under rainout shelter (RS) and glasshouse (GH) environments. Significant (p?≤?0.05) genotype?×?environment interaction effects were observed for number of days to heading (DTH), number of days to maturity (DTM), number of productive tillers per plant (TN), grain yield (GY), thousand kernel weight (TKW), stomatal conductance (SC), leaf canopy temperature (LCT) and chlorophyll content index (CCI) suggesting varied genotypic response under WW and TD treatments. Correlation analysis revealed significant associations TN and GY (r?=?0.67; p?≤?0.001), TKW and GY (r?=?0.72; p?≤?0.001), CCI and GY (r?=?0.39; p?≤?0.05) under TD treatment. Drought tolerant wheat genotypes such as LM100, LM72, LM22 and LM95 are useful for direct cultivation and for developing breeding populations with enhanced yield performance.     

Characterization and Leachability Propensity of Bottom Ash from Medical Waste Incineration

The leachability of bottom medical waste ash from a Jordanian incinerator was studied in this work. The ash was characterized in terms of particle size distribution, chemical and mineralogical composition followed by leaching of several size fractions at different conditions (leaching time, temperature, initial pH, particle size, and solid liquid ratio). The major elements found in the ash were Ca, Si, Al, Cl, Na, Fe, Ti, S, Mg, Ba, and K, while the main mineral phases found in the ash were calcite, halite, sylvite, anhydrite, hematite, hydrochlorborite, cristobalite, melanterite, and chlormayenite. Leaching data indicates that as leaching time and S/L increased, the concentration of metals increased in the leachate. The highest leaching level was at a S/L ratio of 60 mg/ml. As the particles sizes decreased, the concentration of the majority of metals studied increased. Meanwhile, the effect of particle size on other metals was not regular due to the fact that sieving resulted in more concentrated metals in certain particle size fractions. Leachability results also indicate that variation in the initial pH has a slight effect on the degree of leaching. The concentration of some metal ions increased with temperature, while others increased initially but subsequently decreased. The extracted quantities of all the heavy metals were less than the limits set by EPA.     

Optimum rate of nitrogen fertilization for drip-irrigated wheat under semi-arid conditions

Limited water availability in arid and semi-arid wheat production systems increases the need of applying efficient drip irrigation systems. However, there is little information available about the optimum level of nitrogen (N) fertilization for drip-irrigated wheat. A two-years field study in the semi-arid region of Upper Egypt was carried out in a randomized complete block design to investigate the response of drip-irrigated wheat to three levels of N fertilization (N₁₂₀ = 120, N₁₈₀ = 180, and N₂₄₀ = 240 kg ha^?1). N₂₄₀ increased the uptake of N, P, and K by 66.3, 48.6, and 43.5%, respectively, as compared to N₁₂₀. The application of N₂₄₀ increased the grain yield by 28.4 and 40.4% and water use efficiency by 27.6 and 41.8% the first and second season, respectively, as compared to N₁₂₀. Based on the obtained results, it is recommended to fertilize drip-irrigated wheat by 240 kg ha^?1.     

Selection of cowpea genotypes based on grain mineral and total protein content

Grain legumes, including cowpea, are the cheapest sources of minerals and protein to enhance human nutrition. Cultivar development and deployment of cowpea with increased grain mineral content and protein composition rely on selection of genetically unique and complementary breeding lines. The objective of this study was to assess the grain minerals and protein composition of diverse cowpea collections of eastern, southern and western Africa to select promising parents to develop a breeding population. Twenty-two genetically diverse cowpea genotypes were field evaluated using a randomised complete block design with three replications in two locations in South Africa. The dried grain mineral contents were determined using an Atomic Absorption Spectrophotometre, while the protein content was determined by the combustion method. Analyses of variance showed significant (P?<?0.05) effects of genotypes, locations and their interactions. The test genotypes showed considerable variation for the following nine mineral contents: calcium (Ca), copper (Cu), iron (Fe), potassium (K), magnesium (Mg), manganese (Mn), sodium (Na), phosphorus (P), and zinc (Zn) varying from 0.07 to 0.12?mg?kg^?1; 4.46 to 7.81?mg?kg^?1; 0.06 to 0.11?g; 11.82 to 14.45?g; 1.86 to 2.27?g; 9.24 to 13.30?mg?kg^?1; 0.26 to 0.80?g; 4.63 to 5.92?g and 0.03.00 to 0.05?g, respectively. Further, the total protein content varied from 23.16 to 28.13%. Significant correlations were detected among some mineral elements and total protein content, suggesting the possibility of simultaneous selection for these traits. The principal component analysis (PCA) identified four principal components (PCs) contributing to 70.93% of the total explained variation amongst genotypes. Overall the following genotypes with desirable grain mineral and protein attributes were selected: IT90K-59 (Ca), 98K-5301 (Ca and protein), ITOOK-1060 (Cu), ITOOK-1217 and IT845-2246 (Fe), Bensogla (K, Na, and P), TVU11424 and ITOOK-1217 (Mg), CH14 (Mn and Na), TVU12637 (Mn) and Glenda and Vuli (Zn). The selected cowpea genotypes are useful genetic resources for population and cultivar development for grain nutrients composition.     

Preliminary investigation of the effect of ethyl 4'fluorooxanilate as a male gametocide of sweet stem sorghum

An effective male sterility system enables targeted crosses between parent plants with desired and complementary characteristics. The use of chemical hybridising agents (CHAs) to induce male sterility is quicker and more efficient than manual emasculation. This study investigated the concentration, stage of application and frequency of application of ethyl 4'fluorooxanilate (E₄FO) for inducing male sterility of sweet stem sorghum without affecting female fertility. In Trial 1, the dose rate of E₄FO was determined to optimise male sterility. In this experiment three genotypes were tested at E₄FO dose rates. In Trial 2 the frequency of application of E₄FO was determined using three sweet stem sorghum genotypes, three E₄FO doses, and six frequencies of application. Data on sterility was inferred based on seed set and seed count from the treated plants. Male sterility was achieved when E₄FO was applied during heading stage using the following rates: 1?g l^?1, 1.5?g l^?1 and 2?g l^?1, with more than one application. Applying E₄FO twice during the heading stage at a rate of 2?g l^?1 would induce male sterility in the tested sweet stem sorghum genotypes, a result that could be useful in hybrid breeding programmes.     

Agro-morphological characterisation and selection of sorghum landraces

Sorghum [Sorghum bicolor (L.) Moench] grown under rain-fed conditions is frequently affected by drought stress at different stages, resulting in reduced grain and biomass yield. The aim of this study was to characterise sorghum landraces and to select farmer-preferred medium-maturing genotypes under rainfed and irrigated conditions. Hundred and ninety-six sorghum accessions were evaluated at Kobo site of the Sirinka Agricultural Research Center in 2014/2015 in Ethiopia. Data collected from 14 traits were subjected to analysis of variance, cluster analysis, Pearson’s correlation coefficient analysis, path coefficient analysis and principal component analysis (PCA). Significant genotypic differences (p?<?0.05) were observed. Medium-maturing and drought tolerant sorghum genotypes including E-72457, E-72438, E-72435, E-206214, E-72449, E-75460 and E-75458 with superior agronomic performance were recommend for large-scale production or for further breeding. The genotypes evaluated under rain-fed and irrigated conditions were grouped into five and six clusters, respectively, representing varied different heterotic groups. Grain yield had significant and positive correlation with yield-related traits assessed under the two test conditions. Further, path coefficient analysis revealed that days to maturity under rainfed condition and harvest index under irrigated condition had the highest positive direct effects on grain yield, therefore can be targets for direct selection. Overall, there was marked genetic diversity among the tested genotypes. Suitable medium-maturing farmers-preferred accessions selected from the study will be useful for effective breeding for drought tolerance and medium-maturity.     

The complete elimination of vicine and convicine from the faba beans by combinations of genetic selection and processing techniques

Out of sixty six faba bean (Vicia faba) cultivars and genotypes grown locally in Egypt and in Syria, the genotype 123 A/45/76 proved to be lowest in its vicine and convicine contents. Furthermore, soaking of this bean variety in 1% acetic acid at 40°C for 48 h resulted in reducing the total vicine and convicine contents of the beans by 90%. Home-made faba beans processing including soaking prior to cooking as in the case of bean cakes resulted in considerable reduction of the vicine and convicine contents by 56 and 34% respectively.     

Genotype by environment interaction of seed and oil yield in vernonia (Vernonia galamensis variety ethiopica)

Vernonia (Vernonia galamensis variety ethiopica) is a potentially novel renewable source of natural epoxy oil. The objective of this study was to determine the genotype by environment interaction and to identify superior and stable genotypes of vernonia with high seed and oil yield. Field experiments were conducted during 2006, 2007 and 2008 at two localities namely, Gabaza and Syferkuil. Ten selected genotypes of vernonia were evaluated for seed yield, oil content and oil yield using the randomized complete block design with three replications. Significant interactions (P ≤ 0.05) were detected among genotype by location for seed yield, oil content, oil yield and genotype by year for seed and oil yield. Genotype Vge-18 had the highest seed yield ranging between 3095 and 3337 kg/ha followed by Vge-17 yielding 3006-3137 kg/ha at Gabaza. These genotypes were also the best performers at Syferkuil where Vge-17 yielded 2915-3217 kg/ha followed by Vge-18 with 2819-3152 kg/ha. The superiority statistics allocated Vge-17 and Vge-18 as best yielding and stable genotypes. In both locations Vge-4 had increased seed oil contents at 43% (Gabaza) and 35% (Syferkuil). Other promising genotypes with high seed oil content were Vge-33 at Gabaza (40-43%) and Vge-3 at Syferkuil (34-35%). Genotypes with the highest oil yields were found to be Vge-18 (1117-1370 kg/ha) at Gabaza and Vge-4 with yields of 885-922 kg/ha at Syferkuil. Overall, Vge-17 and Vge-18 were identified as having the highest seed yield, while Vge-4 and Vge-3 yielded the highest seed oil content with average stability. These genotypes could be used for direct large scale production or strategic breeding of vernonia in these or similar environments.     

Determination of selection criteria for seed yield and seed oil content in Vernonia (Vernonia galamensis variety ethiopica)

The magnitude of relationships among different traits is important in plant breeding programs to identify the best selection criteria and improve the efficiency of selection. This study was conducted to determine relationships between seed yield and seed oil content with other important agronomic traits among 36 diverse accessions of Vernonia (Vernonia galamensis variety ethiopica), a potentially novel industrial oilseed crop. Field evaluations were conducted during 2005, 2006 and 2007 at the Limpopo Province in South Africa using a partially balanced lattice design. Simple correlation and path analysis were performed to identify the best selection criteria for increased seed yield and seed oil content. Simple correlation and path analyses revealed that the formation of productive primary heads strongly associated with increased seed yield (r_g = 0.81, p < 0.001). Furthermore, path analysis indicated selection for increased number of primary heads would bring about simultaneous and favorable change towards reduced days to maturity and shorter plant height. Further associational study of traits with seed oil content showed a significant (p < 0.05) correlation between oil content with 1000 seed weight (r_g = 0.4). The path analysis, however, exposed seed yield followed by 1000 seed weight with significant direct effect on seed oil content. The study demonstrated that selection for increased number of productive primary heads is the principal selection criterion to improve seed yield. Whereas selection for 1000 seed weight and increased seed yield serve as major selection criteria to achieve increased oil content in V. galemanesis.