The process of decline of an endangered tree species,Pinus armandii Franch. var.amamiana (Koidz.) Hatusima, on the southern slope of Mt. Hasa-dake in Yaku-shima Island

The process of decline of an endangered tree species,Pinus armandii var.amamiana, was monitored on the southern slope of Mt. Hasa-dake in Yaku-shima Island from 1994 to 1998. There are 163 trees ofP. armandii var.amamiana over 1.3 m in height. They are distributed on steep ridges and rocks with a thin soil layer mostly consisting of friable granite. During the monitoring period, 21 trees ofP. armandii var.amamiana died and the mortality rate was 12.9%. Dead trees were categorized into three types: standing, uprooted and landslide. The uprooted- and landslide-typed dead trees were found only after a severe typhoon struck Yaku-shima Island. This suggests that the combination of fragile site conditions and severe typhoons play an important role in the process of decline ofP. armandii var.amamiana. The standing-typed dead trees were presumed to have been killed by pine wilt disease, accounting for 71.4% of the dead trees. However,Bursaphelenchus xylophilus, the cause of pine wilt disease, was not detected from any of the wood chips or branch samples from the standing-typed dead trees ofP. armandii var.amamiana. This might indicate that some factor(s) other than pine wilt disease could be responsible for the standing-typed death ofP. armandii var.amamiana in natural habitats. A part of this paper was presented at the 109th Meeting of the Japanese Forestry Society.     

Formation and chemical structures of acid-soluble lignin I: sulfuric acid treatment time and acid-soluble lignin content of hardwood

To elucidate the formation mechanism of acidsoluble lignin (ASL) formed in the Klason lignin determination, beech wood meals were treated with sulfuric acid (SA) under various conditions, and the ASL solution was extracted with CHC1₃. The results indicated the following: (1) wood components yielding ASL are dissolved in 72% SA during the initial stage; (2) the quantity of ASL is highest during the initial stage, then decreases with prolonged time of 72% SA treatment and finally reaches a constant value; (3) soluble lignin prepared by 72% SA treatment and subsequent standing in 3% SA again yield insoluble Klason lignin and ASL after boiling in 3% SA; and (4) about half the amount of ASL is dissolved in CHC1₃. The foregoing suggest that wood components yielding ASL are dissolved in 72% SA at the beginning and finally change to ASL after being subjected to depolymerization, hydrolysis, and other reactions. ASL may thus be composed of low-molecular-weight degradation products and hydrophilic derivatives of lignin.     

Criterion for estimating humidity control capacity of materials in a room

As a measure of estimating humidity control capacity of materials in an airtight room under sinusoidal temperature variation, we used the Cb value, which is the ratio of the range of variation in relative humidity in a steel box lined with the material of interest to the range in an empty steel box. In order to clarify the factors that affect the Cb value, we focused on both the temperature variation rate and the area that is lined in the box. It was found that changing the rate of temperature variation over one period strongly affected the Cb value, although the amplitude of temperature variation did not. We further noticed that the difference between the time when peak temperature was reached and the time when peak absolute humidity was reached (peak time difference), was found to be useful for estimating the humidity control capacity of materials. Knowing the difference between the phase when peak temperature was reached and the phase when peak absolute humidity was reached (phase angle difference) was also useful. Because the Cb value was affected by both the variation period and the lined area in the box, we can draw a contour diagram of the period and the lined area for materials to give an overview of the humidity control capacity of a material. The materials of primary interest in this study were Japanese cedar and porous ceramics.     

Lignin-degrading activity of edible mushroom <Emphasis Type="Italic">Strobilurus ohshimae</Emphasis> that forms fruiting bodies on buried sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) twigs

Strobilurus ohshimae is an edible mushroom, and it specifically forms its fruiting bodies on buried sugi (Cryptomeria japonica) twigs. In this research, we studied lignindegrading activity of S. ohshimae. We isolated 18 strains of S. ohshimae from various regions of Japan, and determined their lignin degradation rates on sugi wood meal medium. All the strains of S. ohshimae degraded approximately 6%–12% of sugi lignin in 30 days, and these lignin degradation rates were 1.5–3 times higher than those of Trametes versicolor, which is a typical lignin-degrading fungus. Among the three main lignin-degrading enzymes, activity of lignin peroxidase and manganese peroxidase was not observed, while 4340U/g of laccase was produced in 30 days. To investigate the effect of wood species on lignin degradation by S. ohshimae, the lignin degradation rate and laccase productivity on sugi wood meal medium were compared with those on beech (Fagus crenata). In T. versicolor, both lignin degradation rate and laccase productivity were higher on beech than on sugi. Conversely, in S. ohshimae, lignin degradation rate and laccase productivity were higher on sugi than on beech. Therefore, it was suggested that coniferous lignin is not always difficult to degrade for the fungi that inhabit softwood. Part of this article presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004     

Application of cationic polymer prepared from sulfuric acid lignin as a retention aid for usual rosin sizes to neutral papermaking

Cationic polymers that acted as the retention aids for usual rosin sizes in neutral papermaking were prepared from sulfuric acid lignin (SAL), one type of acid lignin. To convert SAL to the cationic polymer (MP-SAL), SAL was phenolated and then treated by the Mannich reaction to introduce the amino groups. In the MP-SAL single system, MP-SAL exhibited high sizing effectiveness in neutral papermaking with the rosin emulsion size. However, MP-SAL showed no sizing effectiveness when soap rosin size was used. MP-SAL showed increased sizing effectiveness as the pK _a of the introduced amino group increased. From this and comparison of the sizing degrees of MP-SAL and polyethylenimine, which possesses a linear structure, it was suggested that the sizing effectiveness was not only affected by the charge density and molecular weight, but also by the basicity of the introduced amino groups and the molecular structure of the retention aid. In the alum–MP-SAL dual system, alum and MP-SAL synergistically enhanced the sizing effectiveness in the rosin emulsion sizing at neutral pH. In turn, this allowed a decrease in the MP-SAL dosage and resulted in a small decrease in brightness.Part of this report was presented at the 48th Lignin Symposium, October 2003, Fukui     

Establishment of a Method to Measure Length of the Ulnar Nerve and Standardize F-wave Values in Clinically Normal Beagles

We designed a new method of measuring the length of the ulnar nerve and determining standard values for F-wave parameters of the ulnar nerve in clinically normal beagles. Nerve length must be precisely measured to determine F-wave latency and conduction velocity. The length of the forelimb has served as the length of the ulnar nerve for F-wave assessments, but report indicates that F-wave latency is proportional to the length of the pathway traveled by nerve impulses. Therefore, we measured the surface distance from a stimulus point to the spinous process of the first thoracic vertebra (nerve length 1) and the anterior horn of the scapula (nerve length 2) as landmarks through the olecranon and the shoulder blade acromion. The correlation coefficients between the shortest F-wave latency and the length of nerves 1, 2 or the forelimb were 0.61, 0.7 and 0.58. Nerve length 2 generated the highest value. Furthermore, the anterior horn of the scapula was easily palpated in any dog regardless of well-fed body. We concluded that nerve length 2 was optimal for measuring the length of the ulnar nerve.     

Maturity and reproduction of goneplacid crab <Emphasis Type="Italic">Carcinoplax vestita</Emphasis> (Decapoda,Brachyura) in Tokyo Bay

ABSTRACT:     Sexual maturity, morphological sexual dimorphism, and reproduction of the goneplacid crab Carcinoplax vestita were investigated in Tokyo Bay, Japan, from November 2002 to October 2003. The puberty molt in males was evidenced by changes in the relative size of the chelipeds and merus of the walking legs, and was estimated to occur at a size range of 13.20–18.85 mm carapace length. Post-pubertal females were identified by the relative size of the abdomen and puberty was estimated to occur at a size range of 12.81–15.46 mm carapace length. Sexual dimorphism in C. vestita was observed in all features that showed secondary sexual characteristics. Monthly changes of gonad index in males, and of seminal receptacle index and occurrence of sperm plugs in females were synchronized, and indicated that mating was intense in spring. Ovaries began developing in March. Ovigerous females were found in all months except December, but were clearly more abundant between August and October. Fecundity ranged from 7800 to 57 000 mature oocytes per female per batch and was highly correlated with body size. The results suggest that some females may spawn more than one batch per year.     

Growth of the fourspine sculpin <Emphasis Type="Italic">Cottus kazika</Emphasis> in the Gonokawa River,Japan, and effects of water temperature on growth

ABSTRACT:   The fourspine sculpin Cottus kazika is indigenous to Japan and found in Honshu except for the waters facing the Seto Inland Sea, and was also found in southern Shikoku and eastern Kyushu. This species has a catadromous lifestyle and migrates as juveniles from the sea to the middle reaches of rivers to grow. The growth pattern of this fish was investigated by a mark-and-recapture method from July 1994 to December 1996, in the Nigorikawa River, a tributary of the Gonokawa River system, Shimane Prefecture. 0-year-old fish of 50–70 mm total length ( TL ) occurred in the study area from June to July, grew to 90–140 mm  TL by the following April, and attained 160–210 mm  TL by December. This fish grew rapidly in September–November and April–July, almost ceasing to grow in July–September. It seems that this stagnant growth phase in summer is a characteristic of the seasonal growth pattern of C. kazika . A rearing experiment indicated that the growth rate of C. kazika was higher at 16–22°C than at 12–14 and 24–26°C. This result supports the field evidence of a stagnant growth phase in summer in the Nigorikawa River.