Effect of postactivation treatment with latrunculin a on in vitro and in vivo development of cloned embryos derived from kidney fibroblasts of an aged clawn miniature boar

The objective of this study was to examine the effect of postactivation treatment with latrunculin A (LatA), an actin polymerization inhibitor, on in vitro and in vivo development of somatic cell nuclear transfer (SCNT) embryos derived from kidney fibroblasts of an aged Clawn miniature boar (12 years old). After electric activation, SCNT embryos were treated with 0, 0.5 or 1 μM LatA and cultured in vitro. The rate of blastocyst formation was significantly higher (P<0.05) in SCNT embryos treated with 0.5 μM LatA (38%) than those in control (14%). When cloned embryos treated with 0.5 μM LatA were transferred into the oviducts of two recipient miniature gilts to assess their development in vivo, both recipients became pregnant; one maintained pregnancy to term, and a live piglet (weighing 220 g) was delivered by Caesarean section. The results of this study indicated that the postactivation treatment with LatA was effective in improving in vitro developmental capacity of SCNT miniature pig embryos derived from kidney fibroblasts of an aged animal and that miniature pig cloned embryos treated with LatA had the ability to develop to term.     

Matrix metalloproteinases (MMPs) activity in cultured canine bone marrow stromal cells (BMSCs)

Autologous bone marrow stromal cells (BMSCs) infusion therapy improves the hepatic fibrosis. To investigate the mechanism of remission, we evaluated the matrix metalloproteinase (MMP)-2 and -9 activity in canine BMSCs and the effect of pro-inflammatory cytokines on their expression. The activity and the gene expression of MMPs were analyzed by gelatin zymography and quantitative RT-PCR, respectively. The specific gelatinase bands were indicative effect of MMP-2 and -9 in canine BMSCs. MMP-2 expression seemed to be increased by TNF-α and IL-1β while MMP-9 was enhanced by TNF-α and IL-6. These results suggested that remissive effect on liver fibrosis might be partly attributable to the MMP-2 and -9 activity in BMSCs under the inflammatory condition.     

Alteration in the apoptosis process of rat esophageal epithelium with hyperproliferation of indigenous bacteria under a physiological condition

The apoptosis process in rat esophageal epithelium was investigated using enzyme-immunohistochemistry and transmission electron microscopy. As a result, Fas and Fas-L were expressed in the epithelial cell membrane and cytoplasm from the stratum spinosum (SS) to the stratum granulosum (SG). No TNF-R1 show immunopositivity in the cell membranes. TNF-α and caspase-8 were not observed in any layer. Caspase-10, cleaved caspase-3, XIAP and DNase-1 were found in the epithelial cytoplasm from the SS to the SG, whereas Bid, Apaf-1 and cleaved caspase-9 were detected only in the SG. Cytochrome c was observed as cytoplasmic granular positivity from the stratum basale (SB) and altered into homogeneous immunopositivity in the SG. Bcl-2 and Bcl-X immunopositivity was detected in cytoplasm from the SB to the SG. Immunoreactions of Bak in the cytoplasm and Bax beneath the cell membrane were observed from the upper portion of the SS with increasing intensity toward the SG. In the sites with the hyperproliferation of indigenous bacteria, TNF-R1, TNF-α and caspase-8 were detected in the SG and the immunopositive intensities of Bid, Apaf-1 and cleaved caspase-9 were altered to be strong. Prominently swollen cells and decreased mitochondria were ultrastructurally confirmed in the uppermost layers of stratum corneum. These findings suggest that the Fas-Fas-L-interaction initially induces apoptosis through a mitochondria-independent pathway and secondarily through a mitochondria-dependent pathway, leading to eventual epithelial cell death in the rat esophageal epithelium. The bacterial stimuli probably enhance the mitochondria-dependent pathway through the TNF-R1-TNF-α interaction.     

Mitigation of pyrexia by a Th-1-biased IgG subclass response after infection with equine herpesvirus type 1 in horses pre-immunized with inactivated vaccine

The immunoglobulin G (IgG) subclass response was investigated in horses with or without pyrexia after natural infection with equine herpesvirus type 1 (EHV-1) in the field. All horses were kept at the training centers of the Japan Racing Association and were immunized with an inactivated EHV-1 vaccine before EHV-1 infection. An IgG subclass response dominated by IgGa and IgGb was induced in horses without pyrexia after EHV-1 infection. In contrast, horses that developed pyrexia showed increased IgGc and IgG (T) subclass production in addition to IgGa and IgGb. Although inactivated EHV-1 vaccines are considered to induce a mainly Th-2-biased response, these results indicated that the responses in horses inoculated with inactivated EHV-1 vaccine were not uniform, and that horses with a Th-1-biased response were likely to be protected from pyrexia.     

Bilateral segmental aplasia with unilateral uterine horn torsion in a pomeranian bitch

Bilateral segmental aplasia of the uterine horns with unilateral pyometra and uterine horn torsion were diagnosed in a Pomeranian bitch that presented with chronic abdominal distension and an acute onset of anorexia and lethargy. Because radiographic and ultrasonographic findings revealed the presence of markedly enlarged bilateral uterine horns filled with fluid in the caudal abdomen, a tentative diagnosis of either pyometra or hydrometra with uterine horn torsion was made. Exploratory laparotomy showed bilateral, segmentally distended uterine horns with unilateral uterine horn torsion. Ovariohysterectomy was performed, and bilateral segmental aplasia of the uterine horns with the development of unilateral uterine horn torsion was diagnosed histopathologically. To the authors' knowledge, this is the first report of uterine horn torsion in conjunction with segmental aplasia of the uterine horn in a bitch.     

Efficacy of a single intravenous dose of the neuraminidase inhibitor peramivir in the treatment of equine influenza

Equine influenza A virus (EIV) of the H3N8 subtype is an important pathogen causing acute respiratory disease in horses. Peramivir is a selective inhibitor of the influenza virus neuraminidase (NA). The characteristics of peramivir are not only its capacity for parenteral administration, but also its strong affinity for NA and slow off-rate from the NA-peramivir complex, suggesting that it could lead to a prolonged inhibitory effect and thus allow a lower dosing frequency. The aims of this study were to evaluate the inhibitory efficacy of peramivir against the NA activities of EIV in vitro and the treatment efficacy of a single intravenous dose of peramivir in horses experimentally infected with EIV. Peramivir inhibited the activities of NA from the seven contemporary EIV strains in vitro, with 50% inhibitory concentrations ranging from 0.10 to 0.20nmol/L. Horses treated with a single IV dose of peramivir (3000mg/600mL/animal, 7.8-9.3mg/kg of bodyweight) showed significantly milder clinical signs (pyrexia, nasal discharge and cough) with a shorter duration than control horses injected with normal saline. Moreover, the mean duration of virus shedding for the horses treated with peramivir was significantly shorter than for the control horses. These findings suggested that a single IV administration of peramivir had good potential for the treatment of equine influenza, and may help to limit the spread of the disease in the horse population.     

Antimicrobial activity of a bovine myeloid antimicrobial peptide (BMAP‐28) against methicillin‐susceptible and methicillin‐resistant Staphylococcus aureus

A bovine myeloid antimicrobial peptide (BMAP‐28) is a member of the cathelicidin family which is included in the innate immune system of mammals. Recently, there have been many studies about antimicrobial peptides. This study aims to clarify whether BMAP‐28 has bactericidal activity against methicillin‐resistant Staphylococcus aureus (MRSA) and compares its activity against methicillin‐susceptible S. aureus (MSSA) and MRSA. We found that the peptide was effective in killing MRSA (minimal inhibitory concentration (MIC) range; 5–20 µg/mL). It was also revealed that MSSA (MIC range; 1.25–20 µg/mL) had two levels of susceptibility to BMAP‐28. We also examined the effect of BMAP‐28 on bacterial shape to visually show its activity. After exposure to the peptide, both MSSA and MRSA cells showed the morphological changes on their surfaces. Our results indicate that BMAP‐28 is a promising candidate for medicine against drug‐resistant bacteria.     

Rubisco small subunits of C4 plants,Napier grass and guinea grass confer C4-like catalytic properties on Rubisco in rice

ABSTRACT

Overexpression of Rubisco small subunit (RbcS) of C₄ plant, sorghum (sorghum bicolor) was shown to enhance the catalytic turnover rate (k _cat) of Rubisco in rice (Oryza sativa). In this study, the effects of other Rubisco small subunits of C₄ plants, Napier grass (Pennisetum purpureum) and guinea grass (Megathyrsus maximus) on kinetic properties of Rubisco in rice were studied. The expression levels of Napier grass RbcS (NgRbcS) and guinea grass RbcS (GgRbcS) proteins accounted for 41% and 45% of total RbcS, respectively in homozygous overexpression lines. The k _cat and K _m for CO₂ (Kc) of Rubisco were increased in all transgenic lines. Interestingly, the k _cat was markedly higher in NgRbcS homozygous line, whereas K _c was notably higher in GgRbcS homozygous line. Although its effects depend on species, these results suggest that the introduction of C₄ RbcS are effective approaches to alter the catalytic properties of Rubisco in rice.     

Effects of AI protocol and time interval from onset of estrus to AI on conception rate in Japanese Black cows

Two different artificial insemination (AI) protocols were investigated to determine the effect of the time interval from the onset of estrus (as detected by a pedometer) to the AI on the conception rate in Japanese Black cows. Seventy‐three cows were divided into two groups that received AI either after the induction of synchronized ovulation (synchronized AI group; n = 26) or at the time of observed estrus (control AI group; n = 47). Each group was further divided into two subgroups, which were artificially inseminated either 0–12 h (early AI group; n = 21) or 12–24 h (late AI group; n = 52) after the onset of estrus. There was no significant difference in the conception rate between the synchronized AI and control AI groups. The AI protocol and the detection of estrus using a threshold of counted steps (as measured by a pedometer) in this study could be effective for planned reproduction management without the observation of standing estrus in Japanese Black cows.     

Development of an air-injection press for preventing blowout of particleboard V: effects of board density and thickness on property of board manufactured from high-moisture particles

Particleboards with thickness of 10 mm and densities of 0.6, 0.7 and 0.8 g/cm³ were manufactured from high-moisture particles using urea–formaldehyde resin and the effectiveness of air injection was examined. The temperature in the 0.6 and 0.7 g/cm³ boards was lower with air injection than without during the initial to middle stages of pressing, while the temperature in the 0.8 g/cm³ board remained lower with air injection than without throughout the entire pressing process. Air injection reduced the pressing time required to manufacture the 0.6 and 0.7 g/cm³ boards and also increased the internal bond strength of boards of all densities. In the 0.6 and 0.7 g/cm³ boards, air injection reduced the modulus of rupture (MOR), while in the 0.8 g/cm³ boards, the MOR was similar between those manufactured by injecting and not injecting air. Air injection was also found to be effective for boards of high densities. The effectiveness of the air injection on thick boards was investigated by manufacturing 20-mm-thick boards of 0.7 g/cm³. Without air injection, it was not possible to manufacture the 20-mm-thick boards, even by extended hot pressing, but air injection allowed the boards to be manufactured by pressing for 16 min. Air injection was also shown to be effective for manufacturing thick boards.