Nondestructive measurement of cross-sectional shape of a tree trunk

To evaluate windthrow resistance with respect to stem breakage, a nondestructive method for determining the shape of trunk cross sections was developed. In this method, the coordinates of multiple gauge points set on the perimeter of a trunk are calculated by measuring the distances between them. The shape between the gauge points is generated with the use of a profile gauge placed between them. Measurement tests were conducted using profile gauges with lengths of 300 and 900 mm on model specimens with four shape patterns and four different diameters. The accuracy of the estimation was verified by comparing the section modulus calculated for the generated image and for the photograph. The average ratio of section modulus (generated/photo) for all specimens was 0.994, which indicates that the proposed method is highly accurate. The section moduli of hollow trunks can be evaluated using the profile method together with the drill resistance technique on the condition that 26% of the trunk diameter could be drilled without skew.     

Development of an air-injection press for preventing blowout of particleboard II: improvement of board properties using small-diameter holes for air injection

An air-injection press, which has holes punched in the heating plates, injects high-pressure air through the holes of one plate into boards during press heating. The air-injection press can manufacture boards from high-moisture-content particles by controlling blowouts of the boards. In this study, boards were manufactured from particles that had a moisture content of 25% by using the air-injection press, which reduced the required pressing time. Boards manufactured by injecting air through holes of 5 mm in diameter were of poor quality with a low internal bond strength of only 0.31 MPa. When the hole diameter was reduced to 1 mm, the internal bond strength increased to 0.44 MPa. A high air-injection pressure of 0.55 MPa also resulted in improved board properties over those for boards manufactured at lower pressures. This was probably because a large amount of binder was released from boards through the 5-mm holes, together with water vapor, during air injection; the small-diameter holes reduced the release of binder, resulting in better board properties.     

Effects of sealed press on improving the properties of particleboard

To improve the properties of particleboard, boards were produced using a sealed press. With the sealed press, boards were processed under high-temperature and high-pressure steam. This increased the saturation temperature, causing a dramatic rise in temperature inside the board, faster curing of the binder, and a shorter pressing time. The boards were bonded with urea formaldehyde resin, melamine urea formaldehyde resin, or poly(methylene diphenyl diisocyanate) (PMDI). The sealed press improved the internal bond strength and thickness swelling of boards regardless of the binder used during the reduced pressing time. The increased bonding strength improved the board properties, allowing PMDI with a lower resin content to be used for bonding the boards.     

Comparative Evaluation on Nitrogen Saturation of Forest Catchments in Japan and Northeastern United States

To analyze the differences in the status and processes of nitrogen saturation in Japan and northeastern United States, we examined the hydrobiogeochemistry of nitrogen of forested watersheds in these regions. Two distinct differences were found between watersheds in Japan compared with those in US. 1) In Japanese watersheds, marked decreases of NO₃ ^? concentration in surface waters during the summer growing season were not found and NO₃ ^? concentrations sometimes increased especially in the summer at nitrogen saturated sites. This contrast with watersheds in US where decreases in NO₃ ^? concentration during the summer are commonly observed except those watersheds in advanced stages of nitrogen saturation. These differences in NO₃ ^? concentration relationships can be attributed to climatic differences, with Japan having high precipitation and high discharge during the summer, while in many regions of North America lowest discharges are found in the summer. The climatic regime in Japan leads to high rates of mineralization and the rapid transport of NO₃ ^? to streams in summer. 2) Japanese watersheds, even those with high NO₃ ^? concentrations in surface waters, show little evidence of acidification. This is in contrast to sites in US where increased NO₃ ^? concentrations, especially during episodic events, result in surface water acidification.     

Competition Among Courting Male Moths: Male-to-Male Inhibitory Pheromone

The behavioral function of a pheromone released by males of the army-worm moth Pseudaletia unipuncta was investigated both in laboratory wind-tunnel experiments and in experiments with moth-baited traps in the field. Such male moth scents have been thought to act at close range as sexual stimulants for females of the same species. However, the only obvious effect of the P. unipuncta male pheromone was upon other males, decreasing their tendency to approach sexually receptive, pheromone-releasing females and to exhibit copulatory behavior when near those females. The adaptive significance of the male pheromone may be related to the increased reproductive efficiency that results if multiple males are prevented from competing for a single female.     

Cathepsin K-dependent toll-like receptor 9 signaling revealed in experimental arthritis

Cathepsin K was originally identified as an osteoclast-specific lysosomal protease, the inhibitor of which has been considered might have therapeutic potential. We show that inhibition of cathepsin K could potently suppress autoimmune inflammation of the joints as well as osteoclastic bone resorption in autoimmune arthritis. Furthermore, cathepsin K-/- mice were resistant to experimental autoimmune encephalomyelitis. Pharmacological inhibition or targeted disruption of cathepsin K resulted in defective Toll-like receptor 9 signaling in dendritic cells in response to unmethylated CpG DNA, which in turn led to attenuated induction of T helper 17 cells, without affecting the antigen-presenting ability of dendritic cells. These results suggest that cathepsin K plays an important role in the immune system and may serve as a valid therapeutic target in autoimmune diseases.     

Regulated fast nucleocytoplasmic shuttling observed by reversible protein highlighting

The observation of the regulation of fast protein dynamics in a cellular context requires the development of reliable technologies. Here, a signal regulation cascade reliant on the stimulus-dependent acceleration of the bidirectional flow of mitogen-activated protein kinase (extracellular signal-regulated kinase) across the nuclear envelope was visualized by reversible protein highlighting. Light-induced conversion between the bright and dark states of a monomeric fluorescent protein engineered from a novel coral protein was employed. Because of its photochromic properties, the protein could be highlighted, erased, and highlighted again in a nondestructive manner, allowing direct observation of regulated fast nucleocytoplasmic shuttling of key signaling molecules.     

Molecular Aspect of Al Tolerance in Crop Plants: Novel Al-Activated Malate Transporter Gene in Wheat Roots

Aluminum (Al) is a major element in the soil; 30–40% of arable land is acidic. Solubilized Al ion in acid soils inhibits root elongation. Intensive research on the Al tolerance mechanism has been conducted in the past few decades. Mechanism of Al tolerance can be classified into Al exclusion mechanism and intracellular tolerance mechanism. Efflux of organic acids from roots upon receiving the Al signal is the major Al exclusion mechanism. Efflux of organic acids through the channel in the plasma membrane was confirmed, and the gene specifically encoding malate transporter in Al-tolerant wheat was discovered recently. The regulatory mechanism in the efflux of organic acids upon protein phosphorylation may be operative. The production of reactive oxygen species (ROS) and their scavenging system are thought to be important in the intracellular tolerance mechanism.