QUARTZ PORPHYRY TREATMENT ALTERS IRRIGATION WATER CHEMISTRY,AFFECTING HYDROPONIC VEGETABLE PRODUCTION

This study focused on using quartz porphyry (QP) as a water treatment to improve hydroponic production of komatsuna (Brassica rapa L. nothovar; Japanese mustard spinach). We compared the chemistries of the control and QP-treated nutrient solutions and found that magnesium (Mg²⁺) and calcium (Ca²⁺) concentrations increased linearly up to day 21 following sowing in both conditions, then declined slightly. The QP treatment reduced sodium (Na⁺) and chloride (Cl^?) concentrations for the whole cultivation period. In both the control and QP-treated solutions, nitrate (NO^? ₃) and sulfate (SO^2? ₄) showed the same trend to a daily increase. In spite of these similarities, however, komatsuna production was better with the QP-treated nutrient solution compared to control. Treatment with QP during cultivation in August–September reduced the harmful effects of Na⁺, chloride (Cl^?), nitrite (NO^? ₂), and SO^2? ₄ by reducing concentrations of these ions, possibly leading to decreased salinity and toxicity effects in the plants. Mineral concentrations during October–November differed from those of August/September, resulting in variation among the different growth parameters for komatsuna.     

Cadmium contamination of soils and rice plants caused by zinc mining IV. Use of soil amendment materials for the control of Cd uptake by plants

In view of the difficulty in practicing water management as a measure to prevent the production of high Cd rice, alkaline or calcareous soil amendment materials were examined, concerning their pH effect on the availability of soil heavy metals.

1. In the experiment conducted on the contaminated paddy field, the essential Cd uptake by the plant occurred after the ear-forming stage and was reduced remarkably by a basal application of the amendment materials followed by top application, depending on the activity of raising the soil pH. Combined use of calcium silicate and fused magnesium phosphate for a basal dressing was most effective on Cd uptake, producing rice of the lowest Cd content, one fifth of the control.

2. The content of Cu in rice also decreased with the treatment to an extent second to Cd, while that of Zn and Pb decreased in straw but hardly changed in rice. Cu seemed fastest in the straw-to-grain movement which was also promoted by the treatments.

3. Soil Cd and Cu were less soluble in 0.1 N HCl solutions than were Zn and Pb, with the application of fused phosphate. Soil Cd became more insoluble in the incubated soil in a submerged condition and its solubility appeared to be depressed by the addition of ammonium sulfate.

4. Based on the good results for the control of high Cd rice obtained through three years' survey in the problem area, it was recommended that these materials be used in sufficient quantity to raise soil pH, taking care not to cause delay in the first growth.     

Cadmium contamination of soils and rice plants caused by zinc mining V. Removal of soil cadmium by an HCl-leaching method for the control of high Cd rice

Abstract

A method of leaching polluted soil with diluted HCl solution was investigated for controlling high Cd in rice. Results obtained in the pot and field experiments are summarized as follows:

1. By leaching the soil in the pot with 0.05 or 0.1 N HCl solution followed by washing with water, soluble heavy metals were remarkably removed in the order of Cd>Cu>Zn?Pb; the Cd content decreased to half with 0.1 N HCI treatment.

2. Heavy metal contents of the plants decreased with the treatments. Especially, Cd content in straw and rice of the soil applied with CaCO₃ after the treatment was one-third and one-fifteenth of the control, respectively.

3. A contaminated paddy field was similarly treated using industrial cone. HCl. One-fourth of the soluble Cd in the surface soil was removed by this method, and the Cd content of the unpolished rice decreased from 0.33 ppm to 0.06 ppm in the plot treated with fused magnesium phosphate and calcium silicate after the treatment.

4. Cd concentration of the drained water from the treated field could soon be diluted far below the allowable limit with the abundant river current. A sufficient supply of calcareous materials was needed to compensate for the lost bases in the soil.     

Ultrastructural studies of spermatia of grey mould (<Emphasis Type="Italic">Botryotinia fuckeliana</Emphasis>)

To investigate maturation of spermatia of Botryotinia fuckeliana, we examined micro-structural changes in spermatia in liquid culture. Three to four spherical lipid bodies were seen in the center of the cell at the start of culturing. After 3–7 days, maturing spermatia had developed large mitochondria along with extensively developed granular endoplasmic reticulum. In contrast, the lipid bodies decreased not only in number but also in size over time. The results obtained here suggest that the maturation of spermatia involves active cell metabolism using the energy supply from lipid bodies.     

Differences of tensile strength distributions between mechanically high-grade and low-grade Japanese larch lumber III: effect of knot restriction on the strength of lumber

It is well known that the presence of knots in structural lumber is one of the most important strengthreducing factors. For practical purposes, visual grading including knot restriction is an effective method for nondestructive evaluation of strength. Edge knot restriction for not only visually graded lumbers but also mechanically graded lumbers is specified in the Japanese agricultural standards for glued laminated lumber. We conducted experimental studies on differences of tensile strength distributions between mechanically high-grade and low-grade Japanese larch (Larix kaempferi, carriere) lumbers daily used for manufacturing glued laminated timbers in Nagano, Japan. We then examined the additional visual grading of mechanically graded lumbers for nondestructive evaluation. We visually graded the prepared mechanically graded lumber by focusing on the knots' area ratio of grouped knots. We confirmed that the higher visual grade related to the stronger tensile strength, similar to our present knowledge; but the effects of knot restriction were reduced when the length of the lumber increased in view of nonparametric 5th percentiles of tensile strength. The differences in the strength/elasticity ratio between mechanically high-grade and low-grade lumber were negligible. It was clear that the length effect on the ratio in visually graded high-grade lumber was smaller than that of visually graded low-grade lumber. It was thus concluded that knot restriction should have little effect on the tensile strength of mechanically graded lumber.     

Heat Treatments of Milled Rice and Properties of the Flours

The effects of autoclave and oven treatments on the gelatinization of rice flour and on the rheological characteristics of its pastes were studied by differential scanning calorimetry (DSC), rapid viscoanalysis (RVA), and rotational viscometry. Flours from autoclave‐treated rice (ATR) and oven‐treated rice (OTR) were prepared, respectively, by heating at 120°C for 60 min and 160°C for 60 min followed by drying (ATR sample), and grinding at 2.2–12.9% moisture content. The rice flour dispersions were adjusted between pH 6.3 and 2.8 using 0.2M citrate buffer. The retort processing of rice flour in water pastes were done at 120°C for 20 min either once or twice. The gelatinization peak temperature (PT and T_o) and the peak temperature corresponding to the amylose‐lipid complexes (T_p3) of ATR increased at pH 6.3 and 2.8 compared with OTR and UTR flour. This indicates that the internal structures of the starch granules in ATR became more stable to heat and acid, even though the damaged starch content of ATR was 23% compared with 16 and 7%, respectively, for untreated rice flour (UTR) and OTR. The OTR flour pastes showed a gel‐like behavior at pH 4.5 after retort processing in water at 120°C for 20 min; however, the ATR mixture behaved more like a liquid paste. Decreases in the reducing sugar content of OTR and ATR pastes suggested that enzymes in the heat‐treated rice were denatured, which retarded the hydrolysis of glucose chains and the rupture of starch granules during pasting.     

Growth response to the stress of low osmotic potential,salinity and high pH in cultured shoot of Chinese poplars

In vitro cultured shoots of three Chinese poplar species (Populus tomentosa, P. alba cv. Pyramidalis andP. euphratica) and an improved poplar (FS-51), as a control, were exposed to the stress of low osmotic potential, salinity and high pH, and the shoot growth was measured.P. tomentosa andP. euphratica could grow even under the high osmotic stress (0.5m mannitol; −1.7 MPa).P. euphratica shoots which were previously cultured on the medium containing 0.7m mannitol (−2.4 MPa) recovered its growth after being transplanted to the medium without mannitol. The shoot growth ofP. euphratica was not so reduced even on the medium containing 100 mM NaCl. However, growth of the other poplars markedly reduced with 10 mM NaCl. Medium pH (pH 5.8–10) also did not affect the shoot growth ofP. euphratica. These poplars have different tolerance to the stresses in cultured shootin vitro. P. euphratica was extremely tolerant to the stresses which are possible to damage plants in dry land. A part of this study was presented at the 104th Annual Meeting of the Japanese Forestry Society. (1993).     

Effective sampling method for estimating bending strength distribution of Japanese larch square-sawn timber

Information on the strength distribution of timbers and other wood products seems to have become more important for users and producers after revision of the Japan architectural standard in 1998, which emphasizes the performance requirements of structures. Because there is no way other than expensive destructive tests to collect strength data, many researchers have proposed many inspecting methods for predicting strength by nondestructive evaluation. The most popular method for structural timber is the mechanical grading method based on the relation between Young's modulus (E) and strength () with some linear regression models. On the other hand, it is well known that the proof loading test is superior for obtaining information on the lower tail of distribution. If the E distribution of the objective timbers is known approximately, selecting timbers nearest to the projected E values saves timbers for destructive tests. We examined the alternative sampling method using the reported e- data sets of Japanese larch square-sawn timber. The simulated results showed that the estimated lower tail of the bending strength distribution by the alternative method was a better approximation of the experimental distribution than that derived from the conventional linear regression model.Part of this paper was presented at the 47th Annual Meeting of the Japan Wood Research Society, Kochi, April 1997