荒漠植物白刺对模拟增雨的光合响应机制

【目的】研究不同增雨条件下白刺叶片的光合作用和叶绿素荧光特性,从光合生理角度探讨白刺对增雨的响应机制。【方法】以乌兰布和沙漠东缘地区典型荒漠植物白刺为研究对象,设置不同的增雨梯度(增加年均降水量的0,25%,50%,75%和100%),对自然生长的白刺沙包进行人工模拟增雨,利用 Li－6400xt便携式光合测定系统分析仪(USA,LI-COR)测定不同增雨条件下白刺叶片净光合速率(Pn)日动态变化、光响应曲线、CO2响应曲线以及叶绿素荧光参数,并根据 Pn 日变化曲线和响应曲线计算叶片日光合总量(∑Pn )以及各光合生理参数。【结果】1)75%和100%增雨对日均 Pn 和∑Pn 影响显著,日均 Pn 比 CK分别高32.74%和37.64%,∑Pn 比 CK 分别高32.01%和38.43%,说明增雨使白刺光合能力增强,日光合产物的积累增加。2)增雨使白刺表观量子效率( AQY)和光饱和点( LSP)升高,25%,50%,75%和100%增雨的 AQY 比 CK 分别高17.24%,31.03%,37.93%和24.14%,LSP比 CK分别高14.6%,6.0%,3.0%,26.1%,说明白刺叶片利用弱光的能力增强,对强光的利用范围增加,光能转化效率提高,有利于光合作用的高效进行。3)随着增雨量的增加,羧化效率(CE)呈现出逐渐增加的趋势,其中,100%增雨的 CE比 CK高5.73%;增雨使 CO2饱和点( CSP)升高,50%,75%和100%增雨的 CSP 显著高于 CK,分别比 CK高23.67%,28.35%和29.13%,说明白刺叶片 RuBP羧化酶和光合碳循环酶的活性增强,对高CO2浓度的利用范围增加。4)增雨使白刺叶片的原初光化学量子效率( Fv/Fm )、实际光化学量子效率(ФPSⅡ)、电子传递速率( ETR)和光化学猝灭系数( qP )提高,说明增雨有利于白刺叶片PSⅡ反应中心活性增强、开放比例提高,有利于叶片把所捕获的光能转化为生物化学能,并将更多的光能用于推动光合电子传递。【结论】白刺能够调节光合机构的功能、改变自身生理特性、增强对环境资源的利用能力来适应增雨的变化。     

丽江云杉优良家系选择

以引自甘肃省小陇山林业科学研究所的15个丽江云杉家系3年生苗为材料,于国有樟村坪林场造林,观测各家系的成活率、保存率、树高、当年新梢长、地径、南北平均冠幅和一级分枝数,并对家系间6个生长性状指标进行分析。结果表明:7年生时,15个丽江云杉家系间保存率和新稍长的差异均不显著,树高和冠幅的差异均达极显著,地径和一级分枝数的差异均达显著。综合选择出的3个优良家系7年生平均树高比其它12个家系的平均树高提高16.5%,当年新稍长提高10.9%,地径提高4.6%,冠幅提高10.9%,保存率提高3.4%。     

层积时间和深度及贮藏年限对黄瑞香种子萌发的影响

为了找到探索有效打破黄瑞香种子休眠、提高种子发芽率的方法,以黄瑞香种子为试材,研究3种不同层积期、4种不同层积深度以及不同贮藏年限对黄瑞香种子发芽率的影响。结果表明,贮藏1 a或2 a对黄瑞香种子发芽率的影响差异不显著;不同层积期、不同层积深度对黄瑞香种子发芽率有显著影响。层积期10月20日发芽率最高,11月9日发芽率最低;层积深度80 cm效果最好,40 cm发芽率最低;黄瑞香种子生理休眠属深度生理休眠。由于各因素间对打破种子休眠无交互作用,因此层积期为1 0月20日至10月30日、层积深度为60~100 cm,可获得较高的发芽率。     

蔬菜移栽机栽植静轨迹可调式鸭嘴栽植装置设计与试验

蔬菜移栽机在膜上移栽时,只能在较小的范围内调整株距,以保证较小栽植穴口,株距过大会造成栽植器前移撕膜,过小会导致栽植器后移带膜,形成较大穴口,影响幼苗后期生长,为此设计一套栽植静轨迹无级可调的往复式鸭嘴栽植装置。在分析栽植装置结构特点、工作过程及调整构件尺寸参数和安装参数以实现不同株距较小穴口栽植原理的基础上,提出了一套栽植静轨迹无级可调的栽植机构及其栽植方法。通过建立机构的运动学模型,开发了可视化辅助设计软件,分析了各参数对栽植特性的影响,使用逐步逼近法确定了一组满足要求的参数：L₁=35 mm、L₂=350 mm、L₃=70 mm、L₅=280 mm、d_D=358 mm、Φ₄=15°、x_B=20 mm,标定了株距每间隔50 mm对应的支点B纵坐标y_B的位置。根据机构参数组合设计了鸭嘴栽植装置并建立了三维模型,进行了运动学仿真,验证了鸭嘴栽植装置结构设计的可行性。开展了实验室样机试验,试验结果表明：栽植株距在1...     

食品微生物学课程中思政元素挖掘与解析

“食品微生物学”是一门综合性的学科,涉及到基础微生物学,食品微生物学,工业微生物学和医学微生物学等领域,知识涉及面广,课程综合性强,对人们的日常生活影响大。将食品微生物学打造成课程思政教育的前沿阵地尤为重要。因此,本文首先系统性的介绍了将专业课程与思政教育相结合的重要性和必要性。接着笔者重点对食品微生物学中所蕴含的思政元素进行了深入解析,将一些典型案例与课程中的知识点有机融合。最后从改革教学方法,创新教学理念和提高教师队伍的思政意识等方面来阐述了如何才能实现课程思政建设的高效性。本文能够为后续的专业课程如何进行思政建设提供参考,更重要的是能够为教师如何从专业课的知识点中挖掘思政元素提供借鉴和启发。     

基于熵权的TOPSIS模型在黄瓜适宜抗蒸腾产品评价中的应用

为了筛选适宜的抗蒸腾产品,提高黄瓜抗旱性,选用2种代谢型、2种成膜型和1种生长调节剂型共5种抗蒸腾产品进行叶面喷施处理,以喷施清水作为对照,测定黄瓜植株生长、植株生物量和产量品质指标,将熵权法和TOPSIS法相结合,对11个评价指标及6个评价方案进行综合分析.结果表明,代谢型国光抗蒸腾剂处理后黄瓜株高比CK提高1.64...     

Effect of fining and filtration on the haze formation in bayberry (Myrica rubra Sieb. et Zucc.) juice

Bayberry juice was fined with the methods of xanthan/chitosan (XC) or gelatin/bentonite (GB), and then filtered with diatomaceous earth filtration (DF) or ultrafiltration (UF, MWCO 100 kDa). Their effects on juice haze formation were investigated. The XC fining method was more effective than the GB method in removal of the total monomeric anthocyanin, total phenolics, and protein, with less haze formed in the XC fined juice. The DF reduced 2-5% of the total phenolics and 21-23% of protein, while UF reduced 19-24% of the total phenolics and 34-38% of protein, respectively. The results showed that fining and then UF can reduce but cannot eliminate haze formation in bayberry juice. The storage temperature was a critical factor affecting haze formation, and the juice was more stable when stored at lower temperature (4 degrees C).     

Protein engineering of Sulfolobus solfataricus maltooligosyltrehalose synthase to alter its selectivity

Maltooligosyltrehalose synthase (MTSase) is one of the key enzymes involved in trehalose production from starch and catalyzes an intramolecular transglycosylation reaction by converting the alpha-1,4- to alpha,alpha-1,1-glucosidic linkage. Mutations at residues F206, F207, and F405 were constructed to change the selectivity of the enzyme because the changes in selectivity could reduce the side hydrolysis reaction of releasing glucose and thus increase trehalose production from starch. As compared with wild-type MTSase, F405Y and F405M MTSases had decreased ratios of the initial rate of glucose formation to that of trehalose formation in starch digestion at 75 degrees C when wild-type and mutant MTSases were, respectively, used with isoamylase and maltooligosyltrehalose trehalohydrolase (MTHase). The highest trehalose yield from starch digestion was by the mutant MTSase having the lowest initial rate of glucose formation to trehalose formation, and this predicted high trehalose yield better than the ratio of catalytic efficiency for hydrolysis to that for transglycosylation.     

Comparison of various extraction methods for policosanol from rice bran wax and establishment of chromatographic fingerprint of policosanol

A capillary gas chromatographic (GC) method has been developed for the separation and determination of policosanol components extracted from rice bran wax. A Varian CP-sil 8 CB column was employed, and an oven temperature was programmed. Gas chromatography-mass spectrometry (GC-MS) was used to identify the composition of policosanol. Quantitative analysis was carried out by means of hydrogen flame ionization detector (FID) with dinonyl phthalate (DNP) as internal standard. The results indicated that the extract obtained by dry saponification has the highest contents of octacosanol and triacontanol among extracts by all used extraction methods including dry saponification, saponification in alcohol, saponification in water (neutralized and non-neutralized), and transesterification. Meanwhile, the GC-MS fingerprint of policosanol extracted by dry saponification has been established. Euclidean distance similarity calculation showed remarkable consistency of compositions and contents among 12 batches of policosanol from a rice bran wax variety. This protocol provided a rapid and feasible method for quality control of policosanol products.     

Synthesis and characterization of a molecularly imprinted silica gel sorbent for the on-line determination of trace Sudan I in Chilli powder through high-performance liquid chromatography

A highly selective imprinted polymer was synthesized by a surface molecular imprinting technique in combination with a sol-gel process. The imprinted polymer was evaluated by FT-IR and static and kinetic adsorption experiments. The results showed that the imprinted sorbent exhibited good recognition and selective ability, offered a faster kinetics for the adsorption and desorption of Sudan I than the non-imprinted sorbent, a saturated binding capacity (Qmax) that reached 33.47 mg g-1. The prepared sorbent was applied for the determination of trace Sudan I through on-line solid-phase coupled with high-performance liquid chromatography (SPE-HPLC). With a loading flow rate of 1.5 mL min-1 for sampling 50 mL, an enrichment factor of 1266 was achieved. The detection limit (S/N = 3) was 1.2 ng L-1, and the peak area precision (RSD) for five replicate detections of 0.01 microg L-1 Sudan I was 3.66%. The Sudan I in the chilli powder from the local market was determined at three levels (0.25, 0.5, and 1.0 ng g-1) with recoveries ranging from 80.31 to 94.02%.