Research and Realization of Calculating Artery Compliance Using Oscillometric Method

This paper presents a method that can non-invasively detect artery compliance using oscillometric method.There are also researches about Windkessel theory,and analysis of the combination of Windkessel and oscillometric method.Then the authors summarize a method to calculate artery compliance and introduce the clinical effect in the hospital.Compared with traditional sphygmomanometer,they get the pertinence of SBP is r=0.918 5(P<0.001).And the pertinence of DBP is r=0.899(P<0.001).Then it is compared with ultrasonic method,the pertinence of compliance is r=-0.820 9(P<0.01).This proves that the diagnose of blood pressure and artery compliance is effective and artery compliance is an important index in cardiovascular clinical measurement.So this paper makes the oscillometric method to be applied to wide ranges in calculating cardiovascular indexs.     

Existing Situation on Disposal of Sludge from Wastewater Treatment Plant in Three-Gorges Reservoir Area

At present 18 wastewater treatment plants operateing in the Small towns of Three Gorge Areas of Chongqing Municipality, producing 132.95 tons surplus sludge everyday. As regards to the disposition of such numerous surplus sludge, the major disposition technique in these wastewater water treatment plants, i. e. , thickening and mechanical dewatering technique followed by feeding into the municipal solid waste landfill, seems to have a rather bad effect on the normal operation of the municipal solid waste landfill, due to the unstabilized sludge resulted from this technique of the sludge disposition and high moisture in the sludge, which is higher than 80%. This paper has paid some attention to this phenomenon. With respect to the small towns having the the municipal solid waste landfill, the techniques of mechanical dewatering, calcareousness stabilized etc. before feeding into the municipal solid waste landfill, seem to be feasible, while the composting and comprehensive utilization of sludge is available in the small towns which have no municipal solid waste landfills.     

Vibration Analysis and System Simulation for a Stalled Wind Turbine

The aerodynamic characteristic of wind turbine is calculated by applying the Blade Element Momentum(BEM) theory.Also finite element mode analysis is done for the tower and the rotor.Then the multi-dynamic model of the wind turbine is built in Adams.Also the drive chain is calculated by applying state space method and programmed in Matlab/ Simulink.With that the combined simulation of vibration characteristics is carried out on the base of MATLAB/Simulink and ADAMS,in which the transmission effects and aero-elasticity coupling is fully considered.The results show that the method is able to simulate the vibration characteristic almost the same as software Bladed,which is well-known for analyzing performance and loads for the design and certification of wind turbines.     

Finite Groups With 52 p Elements of Maximal Order

The authors discuss the finite groups with 52 p elements of maximal order,and get a theorem as follows: SupposeG is a finite group with |M(G)|=52 p elements of maximal order,where p is a prime and p>5,then G is solvable.     

New Method of Founding Profile Equations and Pressure Angle Formula to the Cylindrical Cam Mechanism with Slide Roller-Follower

According to existent problems on design and application of the cylindrical cam mechanism with the slide roller-follower, the one correct concept about profile design and pressure angle is presented. Based on this concept, the theoretical profile,practical profile,meshing surface equations and pressure angle formula of the cam mechanism are built up by using opp.rotation analysis and offset surface principle. This method is very simple and clear, and avoids the abstract analysing process in meshing principle. The mathematic models built by this paper can be used to design,manufacture and check this type of cam mechanism correctly, and also create conditions to make deeply meshing property analysis of this mechanism.     

Performance Analysis of Anti-CW Interference in MC-CDMA Systems

The multicarrier-code division multiple access (MC-CDMA),which is the combination of direct sequence CDMA (DS-CDMA) and orthogonal frequency division multiplexing (OFDM) techniques, offers various advantages over single-carrier CDMA system. Some of the advantages are that MC-CDMA systems possess can remove the intersymbol interference (ISI) and enhance narrow-band interference suppression capabilities. So the MC-CDMA technique becomes a focus in the field of mobile communication. The authors introduce the typical MC-CDMA system model, discuss the decision statisticalvariable in Rayleigh fading channel included the CW interference, and give the expressions of probability of error in uplink. An approach is proposed with Modified Equal Gain Combining (MEGC) to decrease the effect of CW interference. Theoretical analysis and numerical results show that the anti-CW interference performance of MC-CDMA system can be improved used the MEGC approach.     

Non-invasive Measurement of the Brain Edema and Hematoma

A new method is introduced to measure the conductivity of brain. This method uses magnetic excitation to induce eddy currents inside the brain matter and measures the magnetic field caused by the induced eddy current. The theoretical basis of this method is analyzed and the measurement system is introduced. The aufhors do the experiment and draw a conclusion that the method provided is feasible.     

Compensation of Dead Time Effects Based on the New Switching Strategy

The dead-time inserted into the switching signals of inverters case the dead-time effect of output voltage distortion. The influence of dead-time on output voltage in inverters is analyzed in detail, Then, a new switching strategy, which can provide excellent inverter output voltage distortion correction, is proposed. At last, the experiment results of inverter are presented to demonstrate the practicability and validity of the control strategy.     

A Research of Life Cycle Integrated Management Pattern of Construction Project

Development Management (DM) in decision phase, Project Management on behalf of the owner (OPM) in implementation phase and Facility Management (FM) in operation phase are three isolated management tools during traditional life cycle management of construction project. As a result, a lot of potential disadvantages are aroused. In recent years, many research organizations try to reform the traditional method using different integration means. This paper tries to explore into integration of DM, OPM and FM to overcome the malpractice of traditional life cycle management of construction project. The research focuses on three aspects: 1.putting forward the concept of Life Cycle Integrated Management (LCIM), based on management integration theory; 2. Raising a new idea to owner's (operator's) management organization design, which emphasizes on the balance of life cycle objectives; 3. Analyzing an information module, level and method of system integration of Life Cycle Integrated Management Information System.