Evaluation of an Immunochromatographic Test to the Diagnosis of Canine Brucellosis Caused by Brucella canis

This study evaluated the performance of an immunochromatographic test (ICT) for the diagnosis of canine brucellosis caused by Brucella canis, comparing its results with that of the rapid slide agglutination test with and without the use of 2‐mercaptoethanol and the agar gel immunodiffusion test (AGID). The microbiological culture, PCR and clinical examination were used as reference. According to the results obtained in clinical examination, blood culture, culture of semen and vaginal swab and PCR in blood, semen and vaginal swab, a total of 102 dogs were divided into three groups: B. canis‐infected dogs (Group 1), B. canis‐non‐infected dogs (Group 2) and dogs with suspected brucellosis (Group 3). The diagnostic sensitivity of RSAT, 2ME‐RSAT, AGID and ICT in Group 1 was, respectively, 75%, 37.5%, 27.8% and 89.58%. The diagnostic specificity of RSAT, 2ME‐RSAT, AGID and ICT in Group 2 was, respectively, 91%, 100%, 100%, and 100%. In dogs with suspected brucellosis, 9.67% were RSAT positive, none was positive by 2ME‐RSAT, 3.22% were AGID positive and 6.45% were ICT positive. The main drawback concerning canine brucellosis diagnosis is the lack of a highly sensitive serological assay to be used as a screening test to the rapid identification of infected animals. The ICT showed a high diagnostic specificity and a diagnostic sensitivity value greater than that observed in the RSAT, 2ME‐RSAT and AGID. However, 10.41% of infected dogs had negative results by ICT. These dogs were positive by microbiological culture and/or PCR, indicating active infection and consequently a higher potential of spreading Brucella. Although rapid and simple to perform, the ICT lacked sensitivity to be used as a screening test.     

Asymmetric inheritance of oxidatively damaged proteins during cytokinesis

Carbonylated proteins were visualized in single cells of the budding yeast Saccharomyces cerevisiae, revealing that they accumulate with replicative age. Furthermore, carbonylated proteins were not inherited by daughter cells during cytokinesis. Mother cells of a yeast strain lacking the sir2 gene, a life-span determinant, failed to retain oxidatively damaged proteins during cytokinesis. These findings suggest that a genetically determined, Sir2p-dependent asymmetric inheritance of oxidatively damaged proteins may contribute to free-radical defense and the fitness of newborn cells.     

The Seismic Structure of the Sun

Global Oscillation Network Group data reveal that the internal structure of the sun can be well represented by a calibrated standard model. However, immediately beneath the convection zone and at the edge of the energy-generating core, the sound-speed variation is somewhat smoother in the sun than it is in the model. This could be a consequence of chemical inhomogeneity that is too severe in the model, perhaps owing to inaccurate modeling of gravitational settling or to neglected macroscopic motion that may be present in the sun. Accurate knowledge of the sun's structure enables inferences to be made about the physics that controls the sun; for example, through the opacity, the equation of state, or wave motion. Those inferences can then be used elsewhere in astrophysics.     

Phosphorus desorption and isotope exchange kinetics in agricultural soils

To improve phosphorus (P) fertilization and environmental assessments, a better understanding of release kinetics of solid-phase P to soil solution is needed. In this study, Fe (hydr)oxide-coated filter papers (Fh papers), isotopic exchange kinetics (IEK) and chemical extractions were used to assess the sizes of fast and slowly desorbing P pools in the soils of six long-term Swedish field experiments. The P desorption data from the Fh-paper extraction of soil (20 days of continual P removal) were fitted with the Lookman two-compartment desorption model, which estimates the pools of fast (Q₁) and slowly (Q₂) desorbing P, and their desorption rates k₁ and k₂. The amounts of isotope-exchangeable P (E) were calculated (E_1min to E_{>3 months}) and compared with Q₁ and Q₂. The strongest relationship was found between E_{1 min} and Q₁ (r² = .87, p < .01). There was also an inverse relationship between the IEK parameter n (the rate of exchange) and k₁ (r² = .52, p < .01) and k₂ (r² = .52, p < .01), suggesting that a soil with a high value of n desorbs less P per time unit. The relationships between these results show that they deliver similar information, but both methods are hard to implement in routine analysis. However, Olsen-extractable P was similar in magnitude to Q₁ (P-Olsen = 1.1 × Q₁ + 2.3, r² = .96), n and k₁ were related to P-Olsen/P-CaCl₂, while k₂ was related to P-oxalate/P-Olsen. Therefore, these extractions can be used to estimate the sizes and desorption rates of the different P pools, which could be important for assessments of plant availability and leaching.     

Canine parvovirus type 2c identified from an outbreak of severe gastroenteritis in a litter in Sweden

A litter of recently-vaccinated puppies in Sweden experienced signs of severe haemorrhagic gastroenteritis. Canine parvovirus (CPV) was suspected as the cause of this outbreak on the basis of the clinical signs and the presence of parvoviral antigen in the faeces from one of the affected pups - confirmed using a commercial in-clinic faecal antigen ELISA test kit. A concern was raised about whether the vaccine (which contained a live, attenuated strain of CPV) could have caused the disease and so further faecal samples from the affected pups were submitted for laboratory virus isolation and identification.On cell culture, two out of four faecal samples were found to be virus-positive. This was confirmed as being canine parvovirus by immuno-staining with CPV specific monoclonal antibody. The virus was then tested using a series of PCR probes designed to confirm the identity of CPV and to distinguish the unique vaccine strain from field virus. This confirmed that the virus was indeed CPV but that it was not vaccine strain. The virus was then typed by sequencing the 426 amino acid region of the capsid gene which revealed this to be a type 2c virus.Since its emergence in the late 1970s, canine parvovirus 2 (CPV2) has spread worldwide and is recognised as an important canine pathogen in all countries. The original CPV2 rapidly evolved into two antigenic variants, CPV2a and CPV2b, which progressively replaced the original CPV2. More recently a new antigenic variant, CPV2c, has appeared. To date this variant has been identified in many countries worldwide but there have been no reports yet of its presence in any Scandinavian countries. This case report therefore represents the first published evidence of the involvement of CPV2c in a severe outbreak of typical haemorrhagic gastroenteritis in a susceptible litter of pups in Scandinavia.     

Ageing of vanadium in soils and consequences for bioavailability

Total vanadium (V) concentrations in soils commonly range from 20 to 120 mg kg^?1. Vanadium added directly to soils is more soluble than geogenic V and can be phytotoxic at doses within this range of background concentrations. However, it is unknown how slow sorption reactions change the fate and effect of added V in soils. This study addresses the changes in V solubility, toxicity and bioavailability in soils over time. Four soils were amended with pentavalent V in the form of a soluble vanadate salt, and extractable V concentrations were monitored over 100 days. The toxicity to barley and tomato plants was evaluated in freshly spiked soils and in the corresponding aged soils that were equilibrated for up to 330 days after spiking. The V concentrations in 0.01 m CaCl₂ soil extracts decreased approximately two‐fold between 14 and 100 days after soil spiking, and the reaction kinetics were similar for all soils. The phytotoxicity of added V decreased on average two‐fold between freshly spiked and aged soils. The reduced toxicity was associated with a corresponding decrease in V concentrations in the isolated soil solutions and in the shoots. The V speciation in the soil solution of the aged soils was dominated by V(V); less than 8% was present as V(IV). Oxalate extractions suggest that the V(V) added to soils is predominantly sorbed onto poorly crystalline oxyhydroxides. It is concluded that the toxicity of V measured in freshly spiked soils may not be representative of soils subject to a long‐term V contamination in the field.     

膜下滴灌制种玉米需水量与需水规律的研究

[目的]定位监测高产膜下滴灌制种玉米田间土壤水分动态变化,为膜下滴灌制种玉米拔节后水分管理提供理论依据.[方法]采用时域反射仪(TDR)对膜下滴灌制种玉米田间土壤水分动态变化连续监测并分析干物质的积累情况,运用水分平衡法计算膜下滴灌制种玉米各生育时期耗水量和水分生产率.[结果]拔节期至灌浆期45d左右是玉米耗水高峰期,日平均耗水强度为6.4 mm;灌浆期日耗水强度为3.2 mm.[结论]制种玉米拔节后根区的土壤体积含水量总是维持在23.5;～31.4;(田间持水量的60;～80;).     

Effects of brood size manipulation and common origin on phenotype and telomere length in nestling collared flycatchers

Background

Most species of brown macroalgae recruit exclusively sexually. However, Fucus radicans, a dominant species in the northern Baltic Sea, recruits new attached thalli both sexually and asexually. The level of asexual recruitment varies among populations from complete sexual recruitment to almost (> 90%) monoclonal populations. If phenotypic traits have substantial inherited variation, low levels of sexual activity will decrease population variation in these traits, which may affect function and resilience of the species. We assessed the level of inherited variation in nine phenotypic traits by comparing variation within and among three monoclonal groups and one group of unique multilocus genotypes (MLGs) sampled in the wild.

Results

Of the nine phenotypic traits, recovery after freezing, recovery after desiccation, and phlorotannin content showed substantial inherited variation, that is, phenotypic variation in these traits were to a large extend genetically determined. In contrast, variation in six other phenotypic traits (growth rate, palatability to isopod grazers, thallus width, distance between dichotomies, water content after desiccation and photochemical yield under ambient conditions) did not show significant signals of genetic variation at the power of analyses used in the study. Averaged over all nine traits, phenotypic variation within monoclonal groups was only 68% of the variation within the group of different MLGs showing that genotype diversity does affect the overall level of phenotypic variation in this species.

Conclusions

Our result indicates that, in general, phenotypic diversity in populations of Fucus radicans increases with increased multilocus genotype (MLG) diversity, but effects are specific for individual traits. In the light of Fucus radicans being a foundation species of the northern Baltic Sea, we propose that increased MLG diversity (leading to increased trait variation) will promote ecosystem function and resilience in areas where F. radicans is common, but this suggestion needs experimental support.     

Fracture analysis of perpendicular to grain loaded dowel-type connections using a 3D cohesive zone model

The strength and fracture behavior of dowel-type connections with stiff dowels loaded perpendicular to grain was studied by nonlinear 3D finite element (FE)-analysis. A cohesive zone model was used to model the perpendicular to grain fracture of the wood, i.e., failure by wood splitting along the grain. The influence of load eccentricity and dowel-to-loaded-edge distance was studied for a plate type of geometry loaded in tension and for a simply supported beam loaded in bending. The strength found from the FE-analysis is compared to strength from experimental tests with centric loading, showing overall good agreement. Numerical results for centric loading are further compared to strength predictions according to the linear elastic fracture mechanics (LEFM)-based design criterion present in Eurocode 5 (EN 1995-1-1:2004). The comparison showed good agreement regarding the relative influence of connection geometry, but the design criterion appears, however, to yield unconservative strength predictions. The results of the FE-analyses regarding dowel load eccentricity showed that such loading conditions may yield significantly lower strengths compared to centric loading. An approximate engineering method to account for the strength reduction due to load eccentricity is, furthermore, presented.