Analyses of the impact of changes in atmospheric deposition and climate on forest growth in European monitoring plots: A stand growth approach

During the last 15 years a number of studies have shown increasing forest growth in central Europe, rather than a decline as was expected due to negative effects of air pollution. We have here used data from intensive monitoring plots spread over Europe for a five year period in order to examine the influence of environmental factors on forest growth. Evaluations focussed on the influence of nitrogen, sulphur and acid deposition, temperatures, precipitation and on a drought index calculated as deviation from the long-term mean. The study included the main tree species Norway spruce, Scots pine, common beech as well as European and sessile oak and was based on data from 363 plots. As many other factors besides nitrogen and temperature influence tree growth, expected stem volume increments were modelled using site productivity, stand age and a stand density index. Relative volume increment was then calculated as actual increment in % of expected increment. The site productivity, assumed to be given by site conditions and past environmental conditions, was either taken from expert estimates or computed from site index curves from northern, central and southern Europe. The model explained between 18% and 39% of the variance with site productivity being positively related and age negatively related to actual increment. The various models and statistical approaches were fairly consistent, and indicated a fertilizing effect of nitrogen deposition, with slightly above one percent increase in volume increment per kg of nitrogen deposition per ha and year. This was most clear for spruce and pine, and most pronounced for plots having soil C/N ratios above 25. Also, we found a positive relationship between relative increment and summer temperature, i.e. May–August mean temperature deviation from the 1961–1990 means. The cause–effect relationship here is, however, less certain. Other influences were uncertain. Possibly, sulphur and acid deposition have effects on growth, but these effects are obscured by, and outweighed by the positive effect of nitrogen deposition, because of collinearity between these variables. Drought effects were uncertain also, and one reason for this might be large uncertainties in the precipitation data: precipitation measured on some 50% of the plots correlated poorly with the precipitation data obtained from Europe-wide databases. The major finding of this study was a positive relationship between higher than normal volume increment on one hand and nitrogen deposition on the other hand.     

Assessment of computed tomography derived cricoid cartilage and tracheal dimensions to evaluate degree of cricoid narrowing in brachycephalic dogs

The aims of this observational, analytical, retrospective study were to (i) obtain computed tomographic (CT) cricoid dimensions (height, width, and transverse‐sectional area), (ii) compare the cricoid dimensions between brachycephalic and mesaticephalic breeds, and (iii) compare cricoid cartilage dimensions between dogs without and affected with brachycephalic airway syndrome. The study is important to help to further evaluate and understand the anatomical components of brachycephalic airway syndrome. Measurements were performed in 147 brachycephalic and 59 mesaticephalic dogs. The cricoid cartilage was found to be significantly more oval in Pugs and French Bulldogs compared to mesaticephalic breeds. The cricoid cartilage transverse‐sectional area was smallest for the Pug and, after adjusting for weight, significantly smaller for Pugs (P < 0.001), Boston Terriers (P = 0.001), and French Bulldogs (P < 0.001) compared to Jack Russell Terriers. The tracheal transverse‐sectional area at C4 of English Bulldogs was significantly smaller than for Jack Russell Terriers (P = 0.005) and Labradors (P < 0.001). The cricoid cartilage transverse‐sectional area:weight ratio was significantly lower in brachycephalic breeds compared to mesaticephalic breeds (P < 0.001). The cricoid cartilage:trachea at C4 transverse‐sectional area for brachycephalic dogs was significantly larger than for mesaticephalic dogs (<0.001), demonstrating that the trachea was the narrowest part of the airway. No significant differences were found for cricoid dimensions between dogs affected with and without brachycephalic airway syndrome. However, large individual variation was found among the brachycephalic breeds and further studies investigating the relationship between cricoid cartilage size, laryngeal collapse, concurrent tracheal hypoplasia, and/or severity of brachycephalic airway syndrome are warranted.     

Effects of granivorous rodents on direct seeding of oak and beech in relation to site preparation and sowing date

Planting bare-rooted seedlings is a rather expensive method to regenerate oak (Quercus robur) and beech (Fagus sylvatica). Direct seeding could reduce artificial regeneration costs substantially, but the method currently suffers from a number of problems, one of which is seed consumption by rodents. In the present study clear-cut areas in southern Sweden were prepared using one of four different mechanical site preparation methods – disc trenching, patch scarification, topsoil removal or mounding – then manually sown with acorns and beech nuts. Acorns were sown in May and July 2006, and both acorns and beech nuts were sown in May 2007. Three years following sowing, best seedling establishment from viable acorns, 60–70%, was achieved after sowing in mounds in May, and the subsequent survival reached 90–100%. After the first growing season for beech, both seedling establishment and subsequent survival was lower than for oak, which coincides with a higher number of lost beech nuts at the excavation to investigate the fate of seeds. Granivorous rodents (Apodemus flavicollis, A. sylvaticus, Mus musculus, and Myodes glareolus) were live-trapped more frequently in the vicinity of slash piles compared to other micro-site features, such as uprooted stumps, snags and stones. In 2006, no connection was found between number of rodents captured and proportion of lost seeds, while in 2007 the two were in good accordance. No clear relationship was found between number of captured rodents, vegetation cover class and mechanical site preparation method. More rodents were captured in 2007 than in 2006, and there was an increase in captures from spring until late summer/autumn for both years, which was mirrored in the seedling establishment result from the three different times of sowing. Based on experiences from the present study the recommendation for successful direct seeding of oak on clear-cuts is a combination of mounding site preparation, removal of slash and sowing in May rather than July. However, the results indicate that successful direct seeding of beech is more difficult to achieve.     

Influence of different disease control pesticide strategies on multiple pesticide residue levels in apple

Summary

Seven pesticide application strategies were investigated to control apple scab (Venturia inaequalis) and powdery mildew (Podosphaera leucotricha) and, at the same time, fulfil the new quality standards implemented by some German retailers. These demand that pesticide residues should be below 80% of European Maximum Residue Levels (EU MRL) and that the number of residues present at levels above 0.01 mg kg^?1 should be limited to a maximum of four. The strategies fulfilled the requirement to use combinations of different active substances in order to prevent the emergence of resistance to pesticides. The trials were conducted at two sites in Switzerland, in 2007, and all strategies and applications were in accordance with actual practice. Four replicates of apple samples from each strategy were then analysed for pesticide residues. The incidence of infection with apple scab and powdery mildew were monitored during the season in order to evaluate the efficacy of the different strategies. The efficacies of the different strategies against apple scab and powdery mildew were between 84% and 100% successful. In general, the level of pesticide residues found correlated with application rate and time, and no measured residue level exceeded the EU–MRL. The numbers of residues present at > 0.01 mg kg^?1 were between two and five.     

Relating Gas Dispersion in Porous Media to Medium Tortuosity and Anisotropy Ratio

Gas dispersion in a set of three different porous materials with similar particle size, as a function of material tortuosity and anisotropy ratio, was investigated. The materials were packed with different spatial orientations of the individual particles so as to create media with different tortuosity and anisotropy ratios. Three different media (slate chips, wood chips, and pebbles) and four particle orientations have been used to generate a total of nine different porous media mimicking single porosity, dual porosity isotropic, anisotropic, aggregated, or granular materials. Resulting values of tortuosity and anisotropy ratio for each medium were determined via measurements of gas permeability and molecular gas diffusion coefficient. These values were then compared to measured values of gas dispersivity for each medium. The results showed that dispersivity is inversely proportional to tortuosity but directly proportional to anisotropy ratio and that the relations were approximately linear within the range of tortuosities and anisotropy ratios investigated. Wood chips (dual porosity material) yielded higher values of gas dispersivity compared to slate chips (single porosity material). A likely reason is in part the difference in pore structure between the materials and in part a difference in particle surface roughness (which was highest for wood chips) both of which affects dispersion.     

A comparison of measured catchment sediment yields with measured and predicted hillslope erosion rates in Europe

Purpose  

This study aims to understand better the relationship between measured soil loss rates due to sheet and rill erosion (SL), predicted SL rates and measured catchment sediment yields (SY) in Europe.     

Mercury (Hg) Transport in a High Arctic River in Northeast Greenland

In a warming climate, mercury (Hg) pathways in the Arctic can be expected to be affected. The Hg transport from the high arctic Zackenberg River Basin was assessed in 2009 in order to describe and estimate the mercury transported from land to the marine environment. A total of 95 water samples were acquired and filtered (0.4 ??m pore size), and Hg concentrations were determined in both the filtered water and in the sediment. A range of other elements were also measured in the water samples. Hg concentrations in the filtered water were in general highest in the beginning of the season when the water came mainly from melted snow. THg concentrations in the sediment were in general relatively constant or slightly decreasing until mid-August, where after the concentrations increased. A principal component analysis separated the samples into spring, summer and autumn samples indicating seasonal characteristics of the patterns of element concentrations. The total amount of Hg in the sediment transported was estimated to 2.6 kg. Approximately 60% of the sediment-transported Hg occurred during a 24-h flood in the beginning of August caused by a glacial lake outburst flood. The total amount of transported dissolved Hg was estimated to 46 g, and 13% of this transport occurred during the 24-h flood. If it is assumed that the Hg transport by Zackenberg River is representative for the general glacial rivers in East Greenland, the total Hg transport into the North Atlantic from Greenland alone is approximately 4.6 tons year^?1 with an estimated annual freshwater discharge of ??440 km³.     

Measurement of genetic and environmental variation in barley (Hordeum vulgare) grain hardness

In this study, we assessed a broad range of barley breeding lines and commercial varieties by three hardness methods (two particle size methods and one crush resistance method (SKCS—Single-Kernel Characterization System), grown at multiple sites to see if there was variation in barley hardness and if that variation was genetic or environmentally controlled. We also developed near-infrared reflectance (NIR) calibrations for these three hardness methods to ascertain if NIR technology was suitable for rapid screening of breeding lines or specific populations. In addition, we used this data to identify genetic regions that may be associated with hardness. There were significant (p<0.05) genetic effects for the three hardness methods. There were also environmental effects, possibly linked to the effect of protein on hardness, i.e. increasing protein resulted in harder grain. Heritability values were calculated at >85% for all methods. The NIR calibrations, with R² values of >90%, had Standard Error of Prediction values of 0.90, 72 and 4.0, respectively, for the three hardness methods. These equations were used to predict hardness values of a mapping population which resulted in genetic markers being identified on all chromosomes but chromosomes 2H, 3H, 5H, 6H and 7H had markers with significant LOD scores. The two regions on 5H were on the distal end of both the long and short arms. The region that showed significant LOD score was on the long arm. However, the region on the short arm associated with the hardness (hordoindoline) genes did not have significant LOD scores. The results indicate that barley hardness is influenced by both genotype and environment and that the trait is heritable, which would allow breeders to develop very hard or soft varieties if required. In addition, NIR was shown to be a reliable tool for screening for hardness. While the data set used in this study has a relatively low variation in hardness, the tools developed could be applied to breeding populations that have large variation in barley grain hardness.