Meta-analysis of fungicide efficacy on soybean target spot and cost–benefit assessment

Target spot of soybean has spread in Brazil, the southeastern United States and Argentina in the last decade. A collaborative network of field Uniform Fungicide Trials (UFT) in Brazil was created in 2011 to study the target spot control efficacy of fungicides, including azoxystrobin + benzovindiflupyr (AZ_BF), carbendazim (CZM), fluxapyroxad + pyraclostrobin (FLUX_PYRA), epoxiconazole + FLUX_PYRA (EPO_FLUX_PYRA), mancozeb (MZB) and prothioconazole + trifloxystrobin (PROT_TRIF). Network meta-analysis was used to conduct a quantitative synthesis of UFT data collected from 2012 to 2016 and to evaluate the effects of disease pressure (DP, low ≤ 35% target spot severity in the nontreated control < high) and year of experiment on the overall mean efficacy and yield response to each of the tested fungicides. Based on mean percentage control of target spot severity, the tested fungicides fall into three efficacy groups (EG): high EG, FLUX_PYRA (76.2% control relative to the nontreated control) and EPO_FLUX_PYRA (75.7% control); intermediate EG, PROT_TRIF (66.5% control) and low EG, MZB (49.6% control), AZ_BF (46.7% control) and CZM (32.4% control). DP had a significant effect on yield response. At DP_Low, the highest response was due to PROT_TRIF (+342 kg ha⁻¹, +12.8%) and EPO_FLUX_PYRA (+295.5 kg ha⁻¹, +11.2%), whereas at DP_High, EPO_FLUX_PYRA and FLUX_PYRA outperformed the other treatments, with yield responses of 503 kg ha⁻¹ (+20.2%) and 469 kg ha⁻¹ (+19.1%), respectively. The probability of a positive return on fungicide investment ranged from 0.26 to 0.56 at DP_Low and from 0.34 to 0.66 at DP_High.     

A comparison of popular approaches to optimize landscape resistance surfaces

Landscape Ecology - Landscape resistance surfaces are often used to address questions related to movement, dispersal, or population connectivity. However, modeling landscape resistance is...     

紫花苜蓿耗水规律及灌溉制度优化研究

为研究河套灌区紫花苜蓿的耗水规律,同时对现有灌溉制度进行优化,在田间试验的基础上,设置不同灌水水平对前两茬苜蓿进行了研究。结果表明:现蕾期和开花期是紫花苜蓿耗水的旺盛阶段,该阶段土壤水分亏缺会直接影响苜蓿产量的形成。通过多元线性回归的方法求解得到了两茬紫花苜蓿各生育期的敏感性系数,分别在0.103~0.731和0.041~0.375之间,且以现蕾期和开花期为最大,说明这两个生育阶段为苜蓿生长的关键阶段。以Jensen模型为基础,采用最小二乘法初步优化了两茬紫花苜蓿生育期内的灌溉制度,第1茬灌溉定额以1 400 m3/hm~2为宜,第2茬以2 300 m3/hm~2为宜,两茬灌水次数分别以4次和5次为最优。     

Laboratory study of SO2 dry deposition on limestone and marble: Effects of humidity and surface variables

The dry deposition of gaseous air pollutants on stone and other materials is influenced by atmospheric processes and the chemical characteristics of the deposited gas species and of the specific receptor material. Previous studies have shown that relative humidity, surface moisture, and acid buffering capability of the receptor surface are very important factors. To better quantify this behavior, a special recirculating wind tunnel/environmental chamber was constructed, in which wind speed, turbulence, air temperature, relative humidity, and concentrations of several pollutants (SO₂, O₃, nitrogen oxides) can be held constant. An airfoil sample holder holds up to eight stone samples (3.8 cm in diameter and 1 cm thick) in nearly identical exposure conditions. SO₂ deposition on limestone was found to increase exponentially with increasing relative humidity (RH). Marble behaves similarly, but with a much lower deposition rate. Trends indicate there is little deposition below 20% RH on clean limestone and below 60% RH on clean marble. This large difference is due to the limestone's greater porosity, surface roughness, and effective surface area. These results indicate surface variables generally limit SO₂ deposition below about 70% RH on limestone and below at least 95% RH on marble. Aerodynamic variables generally limit deposition at higher relative humidity or when the surface is wet.     

土壤容许流失量研究的进展与趋势

概述了国内外土壤容许流失量（Ｔ值）研究的历史、目前研究的现状和未来的发展趋势,对Ｔ值研究的主要内容如成土速度、土壤养分流失、泥沙淤积损失、土壤流失与土地生产力的关系、保护沟道侵蚀的重要性等做了讲述。介绍了Ｔ值的数学表达和不同国家的Ｔ值标准,阐述了进行Ｔ值双值性研究的必要性,并对Ｔ值研究中存在的问题进行了分析。     

Hayland conversion to wheat production in semiarid eastern Montana: tillage, yield and hay production comparisons

When converting grass- and haylands to cultivated crop production, care must be taken to conserve and maintain soil resources while considering economic issues. Methods of breaking sod can have a bearing on erosivity, physical and chemical properties of soils, and cost of production. Our objective was to compare three methods of converting crested wheatgrass [Agropyron desertorum (Fisch. ex Link) Schult.] hayland to wheat (Triticum aestivum L.) production vs. leaving the land for hay production. We initiated a study in 1990 on Dooley sandy loam (fine-loamy, mixed Typic Argiboroll) near Froid in semiarid eastern Montana, USA. Plots, replicated three times, were 12- by 30-m oriented east to west on a north-facing slope. We converted sod to cultivated crop production by: (1) moldboard plow, (2) toolbar with sweeps, (3) herbicides (no-till). Plots were fallowed until spring 1991 and then seeded to spring wheat each of the next four years. All wheat plots were fertilized with 224 kg ha⁻¹ of 18-46-0 in 1991 and 1992, and 34 kg ha⁻¹ nitrogen as 34-0-0 in 1993 and 1994. Grass was either fertilized same as wheat or not fertilized. Wheat yields averaged 2540 kg ha⁻¹ on tilled treatments and 2674 kg ha⁻¹ on no-till. Fertilized grass consistently out-yielded unfertilized, and averaged 3.2 Mg ha⁻¹ vs. 1.8 Mg ha⁻¹. Toolbar with sweeps had highest economic return of US$169.48 ha⁻¹ to pay for land, labor, and management. Moldboard plow had US$162.05 ha⁻¹. Because of herbicide costs, no-till only returned US$148.64 ha⁻¹. Unfertilized grass hay returned US$67.68 ha⁻¹ and fertilized grass hay, US$97.95 ha⁻¹. Results may be tempered because our wheat yields were high: a 2016 kg ha⁻¹ wheat yield would have returned the same as fertilized grass. Before converting grass- and hay-lands to small grains production, consideration must be given to such variables as sod conversion methods, management practices, labor requirements, market conditions, total precipitation and its temporal distribution, soil conditions, growth environment, soil conservation, and economics.     

Synthesis and herbicidal activity of 2alpha, 4alpha-dimethyl-8-oxabicyclo[3.2.1]oct-6-en-3-one derivatives.

The catalytic oxidation of 2alpha,4alpha-dimethyl-8-oxabicyclo[3.2. 1]oct-6-en-3-one with osmium tetraoxide and excess hydrogen peroxide resulted in the formation of 2alpha,4alpha-dimethyl-6, 7-exo-isopropylidenedioxy-8-oxabicyclo[3.2.1]octan-3-one (2), with 91% yield. Addition of aryllithium reagents to this compound resulted in the formation of the aromatic alcohols (6a-h) with 48-76% yield. These alcohols were treated with thionyl chloride in pyridine, and the corresponding alkenes (7a-h) were obtained with 46-80% yield. The effect of compounds 6a-h and 7a-h on the root growth of Sorghum bicolor was evaluated at a concentration of 6.6 microg g(-)(1). The alcohols 6a-h caused an inhibitory effect (8-100%) on the S. bicolor radicle growth. The three most active compounds were 6e (aryl = p-methylphenyl), 6g (aryl = p-chlorophenyl), and 6h (aryl = p-fluorophenyl) and caused 100% inhibition. The effect of alkenes 7a-h was less pronounced and varied from 15% to 46% inhibition. Another experiment was carried out in a greenhouse to evaluate the effect of alcohols 6e, 6g, and 6h, at a 6.6 microg g(-)(1) dose, against Cucumis sativus, S. bicolor and the weeds Bidens pilosa, Desmodiumtortuosum, and Pennisetum setosum. All three compounds showed an inhibitory effect on the development of the aerial parts (26-73%) and roots (13-79%) of the weeds and crops.