Effects of iron-based amendments on soil structure: a lab experiment using soil micromorphology and image analysis of pores

Purpose

Recent trends in soil green and sustainable remediation require an increased attention on environmental effects. The physical consequences of remediation practices on soil structure are very rarely investigated.

Material and methods

A laboratory experiment was carried out by adding iron grit to a sand (S), a silt loam (L), and a clay (C) soil subjected to several wetting-drying cycles. The physical effects of the treatment on soil pore system were identified and quantified combining physical measurements on repacked samples with image analysis of pores on resin-impregnated soil blocks and micromorphological analysis on thin sections.

Results and discussion

A negligible reduction of total porosity (P) resulted in S, and a slight increase was observed in the L and C soils. However, an important impact on soil structure was identified in pore size range >10 μm for the L and C soils, with the formation of new pores related to the differential shrink-swell behavior between soil matrix and added iron grains. Different plasticity of these soils also played a role in planar pore formation.

Conclusions

Effects of the addition of iron grit on soil pore system are strongly dependent on soil physical properties. The performed experiment showed that iron-based amendments can improve soil structure in low-plastic shrink-swell soil increasing porosity in the range of transmission pores (50–500 μm). This study showed the high potential of soil micromorphology and pore image analysis in order to evaluate the environmental impact of soil remediation practices.     

Biochar improves sediment microbial fuel cell performance in low conductivity freshwater sediment

Purpose

The low conductivity of sediments for mass and electron transport is the most severe limiting factor in sediment microbial fuel cells (SMFCs), so that sediment ameliorations yielded more remarkable effects than electrode improvements. The objective of this research was to enhance the electricity generation of SMFCs with amendments of biochar to freshwater sediments for conductivity enhancement.

Materials and methods

Laboratory-scale SMFCs were constructed and biochars were produced from coconut shells at different temperatures. Variations in the power output, electrode potential, internal resistance, total organic carbon (TOC) content, and microbial communities were measured.

Results and discussion

Amending with biochar reduced the charge transfer resistances of SMFCs and enriched the Firmicutes (mainly Fusibacter sp.) in the sediment, which improved the SMFC power generation by two- to tenfold and enhanced the TOC removal rate by 1.7- to fourfold relative to those without the amendment.

Conclusions

The results suggested that biochar amendment is a promising strategy to enhance SMFC power production, and the electrical conductivity of biochar should be considered important when interpreting the impact biochar has on the electrical performance of soil or freshwater sediment MFCs.

     

Nutrient limitations to bacterial and fungal growth during cellulose decomposition in tropical forest soils

Nutrients constrain the soil carbon cycle in tropical forests, but we lack knowledge on how these constraints vary within the soil microbial community. Here, we used in situ fertilization in a montane tropical forest and in two lowland tropical forests on contrasting soil types to test the principal hypothesis that there are different nutrient constraints to different groups of microorganisms during the decomposition of cellulose. We also tested the hypotheses that decomposers shift from nitrogen to phosphorus constraints from montane to lowland forests, respectively, and are further constrained by potassium and sodium deficiency in the western Amazon. Cellulose and nutrients (nitrogen, phosphorus, potassium, sodium, and combined) were added to soils in situ, and microbial growth on cellulose (phospholipid fatty acids and ergosterol) and respiration were measured. Microbial growth on cellulose after single nutrient additions was highest following nitrogen addition for fungi, suggesting nitrogen as the primary limiting nutrient for cellulose decomposition. This was observed at all sites, with no clear shift in nutrient constraints to decomposition between lowland and montane sites. We also observed positive respiration and fungal growth responses to sodium and potassium addition at one of the lowland sites. However, when phosphorus was added, and especially when added in combination with other nutrients, bacterial growth was highest, suggesting that bacteria out-compete fungi for nitrogen where phosphorus is abundant. In summary, nitrogen constrains fungal growth and cellulose decomposition in both lowland and montane tropical forest soils, but additional nutrients may also be of critical importance in determining the balance between fungal and bacterial decomposition of cellulose.     

Processing tomato quality as affected by irrigation scheduling

In Southern Italy the paucity of water is a very important problem and due to the fundamental importance of the water for the processing tomato, in this study the influence of irrigation on processing tomato quality was investigated in the years 2002 and 2003. A hybrid processing tomato (Lycopersicon esculentum L. Mill cv. Ability) was treated with different water regimes obtained combining amount of water and irrigation interval. The effects of the trials were evaluated taking into account the physical and chemical characteristics of the fruits, as well as the content in antioxidants moieties. Furthermore, the relationship among all the quality parameters and the seasonal amount of irrigation water was evaluated.The results, comparing different water regimes obtained combining amount of water and irrigation interval, gave useful indications on the possibility to improve nutritional tomato quality by reducing irrigation water during tomato cropping. In particular, relatively to the Mediterranean areas of tomato cultivation and to the texture of the soil considered in this study, the best compromise between quality and quantity of the processing tomato fruit was achieved both with the extension of the irrigation interval (L40 or L60) and with the limitation of irrigation volume for the second part of the tomato crop cycle (thesis 100-50). Extending the irrigation interval and limiting irrigation volume for the second part of the tomato crop cycle, appeared to be the best management strategy to optimize the yield and nutritional quality of processing tomato.     

A bio-economic indicators suite for the appraisal of the demersal trawl fishery in the Southern Adriatic Sea (Central Mediterranean)

The state of demersal fishery in the Southern Adriatic Sea (GFCM-GSA 18, Central Mediterranean), years 1996–2003, from a biological, social and economic point of view was analysed using 47 indicators: 22 biological indicators obtained from fishery-independent data through yearly experimental bottom trawl surveys (“Medits” Programme), and 25 socio-economic indicators estimated from fishery-dependent data, available from the monitoring system of the Italian Institute for Economic Research on Fisheries and Aquaculture (IREPA). Biological indicators were applied for “single-species” (Eledone cirrhosa, E. moschata, Illex coindetti, Merluccius merluccius, Mullus barbatus, Nephrops norvegicus, Parapenaeus longirostris, Raja clavata, Zeus faber) and for “multi-species” analysis. Economic indicators describing economic performance, productivity, costs and prices, and the overall economic sustainability of fishery were estimated. Social indicators and a general indicator summarising social sustainability were also considered. Indicators’ values were displayed using the Traffic Light system. Both fishery-independent and fishery-dependent indicators highlighted a progressive decline of the trawl fishery system in the GSA 18. This decline was mainly related to the ongoing depletion of the traditional fishery target species (mostly long-living, late-maturing species) partially replaced by the increase of traditional accessory species (generally short-living species), as well as to the reduction of productivity and increasing costs. The whole procedure was proposed as a contribution to the identification and applicability of bio-economic indicators for fishery management purposes.     

杂交水稻夷优180的选育与应用

夷优180系福建省南平市农业科学研究所用自主选育的三系不育系夷A与恢复系南恢180配组而成的杂交中稻新品种。经多年在福建省各地试验、试种表现群体整齐、适应性广、产量高、抗性好等特点,2014年通过福建省农作物品种审定。简述了杂交水稻夷优180的选育及应用。     

中稻大田机插与手工插秧简比试验

水稻机械化插秧能够大幅度提高劳动生产率,减轻劳动强度,降低生产成本,达到增产增收的效果。试验结果表明:水稻机插栽培有效穗数多,有利于形成较为合理的群体结构,从而穗粒数较多,结实率提高,产量高,增产效果明显。     

海水倒灌农田水稻栽培技术示范小结

通过对2014年"威马逊"超强台风造成海水倒灌农田后的修复改良水稻栽培技术,包括品种筛选、整地、育秧、水肥管理等试验。摸索出一套海水倒灌农田的水稻高产栽培技术,解决了海水倒灌农田灾区农民的口粮问题,为今后海南沿海地区台风造成海水倒灌农田后的水稻恢复生产储备相应技术。     

福建北部山区中稻浸种催芽技术

介绍了闽北山区水稻生产的现状,种子发芽基本条件,中稻浸种催芽技术及种子催芽过程中常见问题及解决办法。     

优质稻钱优3301在闽清县种植表现与高产栽培技术

高产优质杂交稻新品种钱优3301系福建省农业科学院生物技术研究所与浙江省农业科学院作物与核技术利用研究所用钱江1A/闽恢3301联合培育的,2014年通过福建省农作物品种审定。2016年引入闽清县种植,平均产量达9 127.9 kg/hm~2,具有株型适中、群体整齐、综合性状好、稻米品质优等特点。总结了钱优3301在闽清县种植表现及高产栽培技术。