Copper functionalization of polypropylene fabric surface in order to use in fog collectors

Polypropylene fabrics were coated with copper particles using electroless plating, screen printing and wire arc spray coating techniques. Surface morphology of the fabrics was studied using optical and scanning electron microscopes (SEM). Furthermore, tensile strength, electrical conductivity, thermal conductivity, air permeability, water contact angle and fog collection efficiency of the coated fabrics were measured and the obtained results were analyzed. SEM micrographs showed that a very thin and uniform layer of copper deposited on the surface of the electroless plated polypropylene fibers. In the printed or spray coated fabrics the copper particles filled the spaces between yarns and fibers. The polypropylene electroless copper plated fabrics showed higher tensile strength, electrical conductivity, air permeability and thermal conductivity when compared with the fabrics coated with copper screen printed and copper spray coated fabrics. Finally, the obtained results showed that copper electroless plating could increase the fog collection efficiency of polypropylene fabrics considerably. As a conclusion, the surface modified copper electroless polypropylene fabrics are good candidates for fog collection in appropriate regions which need further investigations.     

Antihyperglycemic Effects of <Emphasis Type="Italic">Platycodon grandiflorum</Emphasis> (Jacq.) A. DC. Extract on Streptozotocin-induced Diabetic Mice

The root of Platycodon grandiflorum (Jacq.) A. DC has been reported to have a wide range of health benefits in oriental food. This study examined the hypoglycemic effects of Platycodon grandiflorum (Jacq.) A. DC aqueous-ethanol extract (PGE) in streptozotocin (STZ) -induced diabetic ICR mice (STZ diabetic mice) for the first time. The effects of PGE on blood glucose, plasma insulin levels and body weight were investigated. A significant decrease in blood glucose levels was observed after single administration of PGE. Furthermore, Glibenclamide and PGE significantly suppressed the rise in blood glucose after 30 min in the acute glucose tolerance test. Treatment with glibenclamide and PGE resulted in a reduction in blood glucose levels from the 2nd week, and this reduction was maintained until the 4th week of treatment. The body weight changed slightly in glibenclamide and PGE treated mice in comparison with the STZ control group. Plasma insulin levels were increased with glibenclamide treatment in STZ diabetic mice, whereas such effect was not observed with PGE. These results indicated that PGE could induce hypoglycemic effects without stimulating insulin secretion.     

Effect of Cultivar Resistance and Haulm Killing Method on Tuber Infection by <Emphasis Type="Italic">Phytophthora infestans</Emphasis>

A series of field trials combining cultivars with different levels of resistance to Phythophtora infestans and different haulm killing methods was conducted in 1997, 1998 and 1999 to assess the contamination potential of the haulm. In addition, the frequency of tubers with late blight was assessed after harvest and storage, combining effects of pretreatment infection, infection by the haulm at harvest and the development of the disease during storage. Haulm killing was performed by diquat (200, 400, 600 g a.i. ha^-1), half cutting of the haulm in combination with diquat (100, 200, 300 g a.i. ha^-1) or full cutting of the haulm. In those treatments where haulm killing was performed purely chemically the haulm remnants’ contamination potential tended to increase at reduced doses. Full mechanical destruction gave as low a contamination potential as application of the full dose of chemical haulm killer. However, there were no consistent differences between the haulm killing treatments in the frequency of blighted tubers after harvest and storage. This indicates that the input of chemical haulm killers may be reduced. There was a large difference between years in tuber blight after harvest and storage, which confirms that climatic factors are of major importance for tuber infection. The large difference found between the cultivars in the frequency of tuber blight indicates that tuber resistance should be an important part of integrated late blight disease management.     

Effect of impact force on tensile properties and fiber splitting of splittable bicomponent hydroentangled fabrics

The effect of impact force when using inclined water jets on splittable bicomponents hydroentangled fabrics are investigated focusing on changes in tensile properties and fiber splitting. The results indicated that with increase of impact force, the tensile strength was increased in both machine direction (MD) and crosswise direction (CD). On changing of water jet inclination angle, the tensile strength was the highest at 10 degree followed by 20 degree and the last 0 degree. The highest fiber splitting were observed in pie segment (PA6/PET) followed by island in sea (PA6/COPET) fiber but no fiber splitting was observed for island in sea (PET/COPET) fiber. The impact force in inclined mode of impact, played a great role in improving fiber splitting and tensile properties of hydroentangled nonwoven fabrics. The Scanning Electron Microscope (SEM) photos were used for investigation of fiber splitting by comparing fiber diameter before and after hydroentanglement.     

Allocating the costs of multi-purpose water resource development: a case study of Chi-Chi Weir in Taiwan

Most multi-purpose water resources have been planned and constructed by governments in Taiwan to meet the water demands of different users. However, economic and solvency differences among parties using water create conflicts regarding the reasonable and equitable allocation of investment and operational costs. The Chi-Chi Weir in Nantou County, which was completed in 2002, meets the high water demand of residents and the needs of industrial growth in central Taiwan. Thus, multi-purpose water reservoirs are designed to serve agriculture, the public and industry. Three analytical methods, the quantity-based method, marginal cost method, and separable cost remaining benefit method (SCRB), are employed to compare the cost allocation for different parties using water. The quantity-based method indicates that proportional costs allocated to agriculture, the public, industry and new irrigated areas are 88.02, 3.63, 7.86, and 0.49%, respectively. Via the marginal cost method, the proportional costs allocated to agriculture, the public, hydropower, industry and new irrigated areas are 68.44, 2.51, 28.71, and 0.34%, respectively. The marginal cost price of water is NT$ 2.97 ton⁻¹; industrial use has the highest price. Based on the SCRB method, the proportional costs allocated to agriculture, the public, hydropower, and new irrigated areas are 18.2, 22.2, 51.8, 4.8, and 2.9%, respectively.     

Blueberry Residue Encapsulation by Ionotropic Gelation

In the processing of fruits such as blueberry (Vaccinium sp), that has high levels of phenolic acid, the food industry produces tons of organic waste that causes harm to the environment. Encapsulation is a technique used to take advantage of these wastes. Several methods are used to encapsulate substances, among them ionotropic gelation proves to be a simple, precise, efficient and economical method for obtaining particles with encapsulated bioactives. In this manner, the aim of this study was to test sodium alginate as wall material to encapsulate blueberry residue by ionotropic gelation. The microbeads were characterized by scanning electron microscopy (SEM), x-ray diffraction (XRD), total phenolic compounds, antioxidant capacity and in vitro dissolution. The results showed that the microbeads had surface invagination; retention of 67.01% of the phenolic compounds after encapsulation and 68.2%, phenolic release 120 min after in vitro dissolution. The results suggest that the tested matrix was suitable for encapsulation. The produced microbeads are promising for applications in food products, once the phenolic compounds present in the blueberry residues were maintained after encapsulation.     

Iron Fortification of Whole Potato Using Vacuum Impregnation Technique with a Pulsed Electric Field Pretreatment

In this study, the effect of a vacuum impregnation (VI) process with pulsed electric field (PEF) pretreatment on fortification of whole potato with ferric pyrophosphate was investigated. The VI process and PEF pretreatment were optimized with respect to physicochemical attributes of PEF-VI-processed samples using response surface methodology (RSM). The results indicated that the iron content of VI-processed and PEF-VI-processed potatoes was increased about 126 and 457%, respectively, compared to unprocessed potatoes. A more intensive PEF pretreatment led to a higher cell disintegration, decrease in colour and textural parameters and also increase in components leakage from treated potato. Our study suggests that whole 180-g potatoes should be pretreated at 394 V/cm with 36 pulses and then treated at 3.5 kPa for 37 min in vacuum stage and 39 min restoration time in atmospheric stage to achieve the highest iron fortification and the lowest physicochemical changes during PEF-VI processing.     

1-Aminoanthraquinone Diazonium Salt on the Coupling Modification Dyeing of Silk Fibroin with Enhanced Color Fastness

Chromophore incorporated into the protein chains through residue modification on silk fibroin will be an important way to get new dyeing technology with improved color fastness. Herein, 1-aminoanthraquinone diazonium salt was prepared and used for the modified dyeing on tyrosine of silk fibroin. The silk after modified dyeing was measured by UV-Vis, FTIR, MS, ¹H-NMR, Data color, and other testing techniques. Interestingly, the resulting silk showed excellent rub and wash fastness. The enhanced color fastness is contributed by an electrophilic substitution reaction between 1- aminoanthraquinone diazonium salt and the ortho position of phenolic hydroxyl in tyrosine molecular. Moreover, the mechanical property of silk was protected effectively by the mild coupling modified dyeing, better than the traditional acid dyeing under high temperature for a long time. This facile strategy provides an alternative approach to silk dyeing and benefits the silk applications.     

Isolation of Nanocellulose from Water Hyacinth Fiber (WHF) Produced via Digester-Sonication and Its Characterization

The successful isolation and characterization of water hyacinth fiber (Eichornia crassipes) (WHF) nanocellulose is presented in this study. The novelty was in exploring a wider range of properties of highly purified samples of WHF after each stage of production in more depth. The isolation was accomplished by pulping in a digester and sonication. Morphological changes before and after treatment were demonstrated by scanning electron microscopy (SEM). The lignin and hemicellulose content decreased during chemical treatment. Transmission electron microscopy (TEM) and particle size analyzer (PSA) were used to determine the morphology of WHF after sonication for 1 h. TEM shows that the diameter and length of nanocellulose WHF were 15.61 and 147.4 nm, respectively. The crystallinity index and crystalline domain area significantly increased after chemical treatment. The highest crystallinity index was 84.87 % after an acid hydrolysis process. The increase in crystallinity leads to good thermal stability. Moisture absorption tests of WHF were carried out before and after treatment. The lowest moisture absorption was in the cellulose fiber after sonication (nanocellulose).     

Tools for knowledge acquisition within the NeuroScholar system and their application to anatomical tract-tracing data

Background

Knowledge bases that summarize the published literature provide useful online references for specific areas of systems-level biology that are not otherwise supported by large-scale databases. In the field of neuroanatomy, groups of small focused teams have constructed medium size knowledge bases to summarize the literature describing tract-tracing experiments in several species. Despite years of collation and curation, these databases only provide partial coverage of the available published literature. Given that the scientists reading these papers must all generate the interpretations that would normally be entered into such a system, we attempt here to provide general-purpose annotation tools to make it easy for members of the community to contribute to the task of data collation.

Results

In this paper, we describe an open-source, freely available knowledge management system called 'NeuroScholar' that allows straightforward structured markup of the PDF files according to a well-designed schema to capture the essential details of this class of experiment. Although, the example worked through in this paper is quite specific to neuroanatomical connectivity, the design is freely extensible and could conceivably be used to construct local knowledge bases for other experiment types. Knowledge representations of the experiment are also directly linked to the contributing textual fragments from the original research article. Through the use of this system, not only could members of the community contribute to the collation task, but input data can be gathered for automated approaches to permit knowledge acquisition through the use of Natural Language Processing (NLP).

Conclusion

We present a functional, working tool to permit users to populate knowledge bases for neuroanatomical connectivity data from the literature through the use of structured questionnaires. This system is open-source, fully functional and available for download from [1].