甜菜夜蛾(Spodopteraexigua Hübner)雄蛾触角对雌蛾性信息素的EAG反应

采用EAG生测技术研究表明,甜菜夜蛾雄蛾触角上具有4种性信息素组分(Z9,E12-14Ac(A)、Z9-14OH(B)、Z9-14Ac(C)和Z9,E12-14OH(D))的感受细胞.单一组分A,二元组分AB和AD,三元组分ABC、ABD和ACD及四元组分ABCD的EAG反应显著较高,与3头雌蛾性信息素腺体浸提液的反应强度相当.进一步对AB二元混合物中两组分的最佳比例以及最佳比例的剂量反应进行了测定.当AB间的比例为55时可产生最大的EAG反应,其它比例(91、73、37、19)间无明显差异.AB(55)混合物的使用剂量在0,04～4μg范围内,EAG值随剂量增加呈直线上升;使用剂量低于0.04μg或高于40μg,EAG值不再有明显变化.     

棉花γ辐射诱变后代M5农艺经济性状的遗传变异

利用250Gy的Co60γ射线对棉花3个品种的干种子进行辐射处理,对其M5农艺经济性状的遗传变异进行分析。结果表明:3个品种的M5群体的铃重、单株铃数、株高、果枝数和麦克隆值的平均变异系数均超过10.0%以上,3个品种的辐射诱变后代M5群体表型性状变异系数存在明显差异;3个品种的M5群体的铃重与2.5%跨长和比强度均呈显著或极显著正相关,在其它性状间的相关性上3个品种的M5群体间存在较大差异;3个品种的M5群体的2.5%跨长均为第一主成分的主要因子。这阐明了辐射对不同棉花品种的诱变效果存在差异,揭示了辐射创造了丰富的遗传变异。     

Stability Analysis on Excavated High Slope of Mozong River Power Station in Wulong

The subject matter of this paper is to analyze the stability of excavated high slope. On the base of typical engineering case in Wulong, Chongqing, the geological conditions and potential failure pattern of the high slope are discussed. Then, the limit equilibrium method and the stereographic projection method are used to synthetically analyze the stability of excavated high slope. As a result, it indicates that the stability of the high slope in insufficient and some retaining structures ought to be adopted for the high slope as soon as possible.     

Digital Beamforming for Unified Spread Spectrum TT&C System

In TT&C system,unified spread spectrum framework and adaptive antenna digital beamforming technologies are used to track, telemetry and command objects. Constant modulus array (CMA) and adaptive signal canceller estimate the direction of arrival (DOA) of every signal and use the optimum weighted vector to form the beams. The phase weighted vectors estimated from DOA improve the processing gain as well as being utilized in the transmitting of tele command signal to form the beam of specified object. Its processing performance is researched and simulated in this paper.     

Soft-switching Analysis Phase-Shifted-FB-ZVS-PWM DC-DC Converter With Saturable Inductor

Compared with the traditional full-bridge(FB)zero-voltage-switched(ZVS) pulsewidth-modulated(PWM) converter, the FB-ZVS-PWM converter with a saturable inductor has a wider load range with ZVS and smaller circulating energy as well as smaller duty cycle loss. By analyzing the operation principle of the converter, this paper studies design considerations of the parameter bringing about ZVS and dead time of the switch, and gives out the design method, finally simulation testing has been carried out.     

Harmonic Analysis and Suppression of High-frequency Welding Devices

This paper analyzes the structure and line current waveform of 3-phase AC voltage regulation circuit. As an application of 3-phase AC voltage regulation circuit, a high-frequency welding device's simulation model and harmonic analysis of line current are presented. Results of simulation are compared to field measurements. The two are in a good agreement, so this simulation model is correct. Two single-tuning filters and one second-order HPF are designed according to the device's harmonic condition. Simulation results of the circuit with filters indicate decrease of the harmonics in current of power supply, and the waveform is close to sinusoidal wave, which prove correctness of the solution to harmonics pollution.     

Nonlinearity of Electronic Throttle and Its Control

This paper introduces the development of the electronic throttle control system (ETCS) , the structure and the principle of the system are also involved. After analyzing the nonlinearity problem existing in the mechanical structure of the system, a mathematical model of the ETCS is built up. Then three controllers (PID controller, Fuzzy controller, sliding mode controller) were designed and simulated in the matlab simulink. The result indicates that the PID controller has an overshoot,but the Fuzzy controller and the sliding mode controller can settle the nonlinearity problem better.     

Research on a Novel Inverter of VSC

In order to improve waveform performance of light HVDC system, a lot of switches which operate in high frequency are used, which causes large switching losses and results high cost. A new Buck type voltage source converter(BVSC) is proposed. The new BVSC comprises a dual-buck converter and a three-phase inverter operating in grid frequency. Only two high frequency switches are used, which results good output waveform performance. In order to reduce the high frequency switching losses, a novel improved double-frequency Buck type voltage source converter(DBVSC) is also proposed. An additional dual-Buck converter is added to the BVSC, the added dual-Buck converter deals with the fundamental power that operates in low frequency, and BVSC only deals with harmonic power that operates in high frequency. The output waveform is enhanced and the switching losses are reduced in DBVSC, and the power rating is also increased. The DBVSC is very suitable for large power rating application. The one cycle control theory is adopted to control the proposed DBVSC with analog circuit, which is very simple. The proposed DBVSC and control method are verified by simulation.     

Exploration of Implementation Strategieson Housing Building Technology

Due to the sharp contradiction between rapidly developing housing construction in small-size town and quite low technological level, in this paper, the significance of setting up integrally technological system is emphasized and the suggestion that the technology should be integrated with the sustainable development, regional context and industrialization is put forward.     

Synthetic Assessment of Power Transformer Condition Based on Matter-element Theory

Condition assessment on power transformer is an important approach to improve reliability of transformer and provide proper decision-making for condition-based maintenance. For long, static assessment method used in the past has already not adapted to the development of modem electricity transmission and distribution technology. So based on the deficiency of fuzzy synthetic assessment method, matter-element synthetic assessment method is introduced. The method can evaluate transformer condition not only in quality but also in quantity. Because each index weight can be given fairly and fast through improved analytic hierarchy process, which need not carry on consistency chec accuracy of assessment can be improved. Examples analysis has proved that assessment method of power transformer condition based on matter-element theory is rational and effective.