Development And Countermeasure of Timeshare Estate

In this paper the concept and active impaction on economy of timeshare were introduced. According to supply, demand and basic condition, developing timeshare estate were provided with basic condition in China. Analyzing the history of timeshare we can get the conclusion that it was unused real estate to startup the timeshare and so the development of timeshare in China have partly active effect. At last, in this paper the policy risk, consumption anticipation risk, lack of demand risk, product design risk, market orientation risk, system management risk, competition risk, internationalization risk, and market impression risk were analyzed except the market risk, business risk and polity risk and so on which were the common risks of real estate. And the countermeasure and measure how to promoting the development of timeshare estate were put forward.     

A Study on the Model of Surface Storm-Water Runoff at Urban Gully

On the assumption that the runoff on the catchment of each gully flows into the gully itself, in this paper, a model of surface storm-water runoff at urban gully is presented, which includes runoff sub-model and concentration sub-model.The runoff sub-model describes the rainfall event with instantaneous rainfall intensity, the runoff-generated event with runoff coefficient of integrative area and the runoff converged event with the principle of equal time of flowage.The concentration sub-model shows that the pollutant concentration event only changes with the runoff event at the gully.In this paper, the concrete form of the model for two gully inlets in Shapingba District of Chongqing is given.The model is calibrated with the data from the synchronized measurements of water quantity and quality at the two gully inlets obtained from July to September 2000.The relative error is calculated by comparing the model predictions with the field-measured results.     

Effect of Stitching on the In-plane Tensile Strength of Stitched Composite Laminates

Some additional effects of stitching on the in-plane mechanical properties of composite laminate is introduced while it was used to improve the interlaminar of plane mechanical properties of the composite laminate. The paper investigates the effect of stitching on in-plane tensile strength of composite laminates. The results show that the effect of stitching is dependent on the stitching parameters. The in-plane tensile strength of laminates is degraded with the decreasing of stitching space and step and increasing diameter of stitching thread. It is found that the initial damage of laminate increased with increasing of stitching parameters such as stitching density. This causes the decrease in the in-plane strength of composite laminate.     

A Product BOM Management Method Based on Single Layer BOM

Bill of material of product is data about product structure, and plays an important role in product information management. The paper analyzed characteristics of product BOM, and put forward a product BOM management method based on single layer BOM, witch can well meet requirements of product BOM.     

New Method to Study In-situ Stress of Rock Mass by AE and Structure Analysis of Rock Mass

In this paper, the authors adopt a method of structural analysis and stereography in combination with acoustic emission Kaiser Effect test in laboratory to find out the main direction of initial stresses. For overcoming the shortcomings of Kaiser effect by comparing it with traditional methods of measuring in-situ stresses, it is shown that this method is simpler, more economical and convenient for a large number of measurements and for studying the law of changes of regional in-situ stresses.     

发动机用平板型空滤器流动阻力特性分析和改进

为减小平板型空滤器流动阻力以增大进气量,对平板型空滤器流动阻力特性开展了实验研究,获得了空滤器流动阻力随流量变化的规律和阻力构成成分。阻力随流量的增大而加速增大,滤芯阻力约占整个空滤器阻力的一半,入口流量为120 m 3/h时,总阻力为915.3 Pa,滤芯阻力为426.4 Pa。在实验获得滤芯阻力参数的基础上,提出采用多孔介质跃升模型对平板型空滤器内部流场开展三维数值仿真分析,结果表明,仿真结果与实验结果比较吻合,最大误差为5.67%。滤芯阻力同样约占整个阻力的一半,另一半阻力主要为出口处阻力,其余壁面阻力约占15%。最后,在实验和仿真分析的基础上,提出了改进模型并进行了仿真分析。结果表明,改进模型阻力有较大程度的下降,入口流量为120 m 3/h时,总阻力为588.2 Pa,较原始模型下降了32.2%;增大空滤器流通横截面积是减小阻力以增大进气量的有效手段,改进空滤器壁面的平滑性是补充措施。     

Exploring Harmonious Protection of Land Resources in City Construction

Urbanization in China is at an essential point in its transformation from the initial stage to accelerating stage. With quick expansion of city scale and large occupation of land for urban construction, the contradiction between land resource shortage and people's living needs becomes more and more prominent. It has great affection on the grand plan of China's sustainable development of economy and society. How to adjust the relations between the development of urban construction and protect the land resource, promote the rational use of urban land, perfect and complete the protection system of land resource for improving the efficiency of urban land use. In order to conserve land resource and find a sustainable way for development of people's living and environment construction, the above mentioned problems are the most important issue for urban construction and important subject of this paper.     

一种快速判别梨果梗的方法

果梗完好与否是梨品质检测的指标之一,因而对果梗情况进行准确判别具有重要意义。为此,通过计算机视觉系统摄取梨的图像,利用图像处理技术提出了一种能快速判别梨果梗有无的算法。该算法的识别正确率达90%,识别速度大约在20～30ms,实现了对梨果梗进行高速检测的目标。     

折流式水解反应器处理印染前道废水进水pH的影响

印染前处理阶段的前道水在印染废水中占有相当的比重,且难降解.运用折流式反应器(HRT=12 h)对其进行了水解预处理研究,考察了在不同的进水pH时,反应器内各格室的COD值及其去除率随进水pH值的变化规律以及反应器出水BODs/CODcr的变化.试验结果表明,进水pH值适宜范围为7.6～8.8,COD去除率在29%～40%之间,出水BODs/CODcr由进水的0.35左右提高到0.45左右,为印染废水的达标排放处理的水解pH条件提供参考.