田间小棚繁殖烟蚜茧蜂的繁蜂效果研究

研究了田间小棚繁殖烟蚜茧蜂的繁蜂效果,比较了在不同接蜂量和蚜量范围条件下的僵蚜数量及其羽化情况。接蜂量和接蜂时的蚜量是影响僵蚜数量的2个重要因素,以接蜂时的蚜量对繁蜂效果的影响更为明显。在接蜂量为蜂(♀)蚜比1∶100、蚜量范围2 000~3 000头/株的条件下,可获得较好的繁蜂效果,僵蚜的数量可达到8 000个/株以上。在繁蜂前期僵蚜的质量较高,僵蚜的羽化率可保持在90%以上,在繁蜂后期受重寄生蜂的影响,僵蚜的质量明显下降。应用田间小棚繁殖烟蚜茧蜂时,重寄生蜂是影响后期繁蜂质量的重要因素。     

Approaches to Configuration Determinations of Flexible Marine Natural Products: Advances and Prospects

Flexible marine natural products (MNPs), such as eribulin and bryostatin, play an important role in the development of modern marine drugs. However, due to the multiple chiral centers and geometrical uncertainty of flexible systems, configuration determinations of flexible MNPs face great challenges, which, in turn, have led to obstacles in druggability research. To resolve this issue, the comprehensive use of multiple methods is necessary. Additionally, configuration assignment methods, such as X-ray single-crystal diffraction (crystalline derivatives, crystallization chaperones, and crystalline sponges), NMR-based methods (JBCA and Mosher’s method), circular dichroism-based methods (ECCD and ICD), quantum computational chemistry-based methods (NMR calculations, ECD calculations, and VCD calculations), and chemical transformation-based methods should be summarized. This paper reviews the basic principles, characteristics, and applicability of the methods mentioned above as well as application examples to broaden the research and applications of these methods and to provide a reference for the configuration determinations of flexible MNPs.     

液体肥料施用装置设计与试验

针对液体肥料发展迅速和液体肥料施用装置发展不完善的现状,研制了一种可测量液体肥施用装置主要技术性能及参数的试验台,在此基础上对喷头流量影响因素作了三因素二次回归正交旋转试验,得出了液体肥料质量分数、电动机转速及喷头口直径大小对喷头流量的影响规律及主次关系。     

内燃机燃烧模型的发展现状

利用CFD技术对内燃机燃烧过程进行数值模拟已成为内燃机研究的重要工具。选用恰当的燃烧模型对准确预测内燃机燃烧过程具有重要意义。内燃机CFD燃烧模型主要针对自燃、预混燃烧和非预混燃烧3种燃烧模式,其中有些模型可以同时模拟2种模式或3种模式。内燃机新的燃烧系统的不断出现促进了燃烧模型的发展。本文以STAR—CD和FIRE软件为出发点,介绍了内燃机燃烧模型的发展现状。     

Investigation of the In Vivo,In Vitro,and In Silico Wound Healing Potential of Pinctada martensii Purified Peptides

Previous studies found that both oral and topical administration of enzymatic digestion products < 3 K Da ultrafiltration fractions of Pinctada martensii mantle (PMPs) had pro-healing effects. Thus, we further purified them by Sephadex-G25 and screened them by cellular assays to obtain Pinctada martensii purified peptides (PMPPs). In this study, we explored the mechanism of PMPPs on wound healing by in vivo, in vitro, and in silico experiments. LC-MS/MS results showed that PMPPs consisted of 33 peptides with molecular weights ranging from 758.43 to 2014.04 Da, and the characteristic peptide was Leu-Asp. The results of cellular assays showed that PMPPs promoted the proliferation of human skin fibroblasts (HSF) (135%) and human immortalized keratinocyte (HaCaT) cells (125%) very significantly at 12.5 μg/mL. The in vivo results showed that PMPPs could achieve scarless healing by inhibiting the inflammatory response, accelerating the epithelialization process, and regulating collagen I/III ratio. The optimal peptide sequence FAFQAEIAQLMS of PMPPs was screened for key protein receptors in wound healing (EGFR1, FGFR1, and MMP-1) with the help of molecular docking technique, which also showed to be the key pro-healing active peptide sequence. Therefore, it may provide a therapeutic strategy with great potential for wound healing.     

夏闲期种植不同绿肥作物对土壤养分及冬小麦产量的影响

为探明种植绿肥作物对关中土壤肥力及冬小麦产量的影响效果,在夏闲期种植光叶苕子（Vicia villosa Rothvar）、毛叶苕子（Vicia villosa Roth）、紫云英（Astragalus sinicus）和草木樨（Melilotus suaveolens Ledeb.）等四种绿肥作物,以免耕休闲为对照,分析了冬小麦主要生育时期的土壤速效养分动态变化及其产量效应。结果表明,夏闲期种植绿肥的土壤速效磷、速效钾和碱解氮都有不同程度的提高,增加量主要受绿肥的养分含量以及生物量影响。与对照相比,种植并翻压光叶苕子、毛叶苕子、紫云英和草木樨,均可显著提高冬小麦单位面积穗数、穗粒数和千粒重,冬小麦依次增产21.1%（P＜0.05）、24.3%（P＜0.05）、6.0%和11.6%。     

不同温度下东方粘虫年龄-阶段两性实验种群生命表的构建

为明确不同温度对东方粘虫Mythimna separata(Walker)种群动态的影响,建立东方粘虫种群动态模型,利用年龄-阶段两性种群生命表得到了室内不同温度下东方粘虫种群的发育历期、存活率、繁殖力和种群生命表参数,并基于种群生命表参数预测了2个月内东方粘虫的种群动态。结果表明,东方粘虫各虫态的发育历期和产卵前期随温度的升高而显著缩短。24℃下,东方粘虫单雌平均产卵量为717.1粒,显著高于其它温度下;成虫寿命也显著高于其它温度下,且雄蛾寿命显著长于雌蛾,分别为15.3 d和13.0 d;卵孵化存活到成虫的概率、幼虫存活率和化蛹率均最高,分别为66.7%、68.9%和96.8%。内禀增长率随温度的升高而显著增加,平均世代周期则显著降低,18、21、24、27、30℃下分别为0.051、0.077、0.113、0.121、0.156 d-1和77.2、61.3、49.0、40.3、31.5 d;周限增长率也随温度的升高而增加,分别为1.05、1.08、1.12、1.13、1.17 d-1;净增殖率在24℃下为257.1,显著高于其它温度下,其它温度条件下无显著差异。表明东方粘虫在18~30℃范围内都能完成生长发育和生殖,24℃下种群存活率高、繁殖力大、世代周期较短,更适合种群增长。     

骨折对大鼠凝血指标的影响

Wistar大鼠160只,随机分为8组,正常对照组、6h组、12h组、24 h组、3d组、5d组、7d组、14d组,每组各20只,除对照组外其他各组大鼠均手术使其一侧后肢股骨粉碎性骨折,各时段组大鼠采血测凝血指标:凝血酶原时间(PT)、凝血活酶时间(TT)、纤维蛋白原(FBG)后取患肢血管做病理学检查.两项检查结果表明,大鼠粉碎性骨折后,12 h至3d内的时间段是肢体深静脉血栓(DVT)形成的关键期,此后进入静脉血栓脱落导致肺栓塞的危险期,在骨折前或骨折后的前3d采取积极措施预防DVT可取得较理想的效果.动态监测创伤骨折大鼠凝血指标的变化,对早期预防创伤后深静脉血栓形成具有诊断价值.     

Numerical analysis of injection molding for the Syringe Barrel with optimum design and processing condition

The numerical analysis was performed to predict the potential problem, often occurring during the manufacturing process of the disposable medical device of a great volume. The cavity filling analyses were performed for the new design of the 3cc Syringe Barrel using polypropylene(PP1), and a new nucleated polypropylene(PP2) material for better clarity. These analyses have been performed for different processing conditions as well as various wall thickness designs for both materials. With the nucleated material, only the original wall thickness design has been studied at two different processing conditions for comparison purpose. This study was conducted to investigate the optimum part design and processing condition for two different materials. The most desirable design was selected with Design 3 for material utilization and reduced flow stresses by comparing the field results. The new nucleated polypropylene provided slightly better product quality and processing.