A two-step modification treatment of solid wood by bulk modification and surface treatment

A combination of bulk and surface modification of wood could lead to a product that shows the advantages of both treatments. This study evaluates the penetration of melamine resin into acetylated and silylated cell walls and possible side effects of melamine impregnation on this bulk treatment in order to clarify the feasibility of a combination of the chosen bulk modification (acetylation or silylation) and surface treatments (hardening by melamine modification). UV microscopy confirmed that melamine resin penetrates into wood cell walls even after acetylation and silylation treatment. Energy dispersive X-ray analysis showed that the melamine treatment did not lead to substantial washing out of silyl groups with the silylation reagent used. The possibility of a combination of the selected bulk and surface modification methods is given.     

Sterile insect technique and <Emphasis Type="Italic">Wolbachia</Emphasis> symbiosis as potential tools for the control of the invasive species <Emphasis Type="Italic">Drosophila suzukii</Emphasis>

Drosophila suzukii, a vinegar fly originated from Southeast Asia, has recently invaded western countries, and it has been recognized as an important threat of a wide variety of several commercial soft fruits. This review summarizes the current information about the biology and dispersal of D. suzukii and discusses the current status and prospects of control methods for the management of this pest. We highlight current knowledge and ongoing research on innovative environmental-friendly control methods with emphasis on the sterile insect technique (SIT) and the incompatible insect technique (IIT). SIT has been successfully used for the containment, suppression or even eradication of populations of insect pests. IIT has been proposed as a stand-alone tool or in conjunction with SIT for insect pest control. The principles of SIT and IIT are reviewed, and the potential value of each approach in the management of D. suzukii is analyzed. We thoroughly address the challenges of SIT and IIT, and we propose the use of SIT as a component of an area-wide integrated pest management approach to suppress D. suzukii populations. As a contingency plan, we suggest a promising alternative avenue through the combination of these two techniques, SIT/IIT, which has been developed and is currently being tested in open-field trials against Aedes mosquito populations. All the potential limiting factors that may render these methods ineffective, as well as the requirements that need to be fulfilled before their application, are discussed.     

Influence of latitude on the light availability for intercrops in an agroforestry alley-cropping system

Light competition by trees is often regarded as a major limiting factor for crops in alley-cropping agroforestry. Northern latitude farmers are usually reluctant to adopt agroforestry as they fear that light competition will be fiercer in their conditions. We questioned the light availability for crops in alley-cropping at different latitudes from the tropic circle to the polar circle with a process-based 3D model of alley-cropping agroforestry. Two tree densities and two tree line orientations were considered. The effect of the latitude was evaluated with same-sized trees. The relative irradiance of the crops was computed for the whole year or at specific times of the year when crops need more light. The heterogeneity of crop irradiance across the alley was also computed. Surprisingly, crop relative irradiance of summer crops at high latitudes is high, at odds with farmers’ fears. Best designs were highlighted for improving the crop irradiance: North–South tree lines are recommended at high latitudes and East–West tree lines at low latitudes. At medium latitudes, North–South tree lines should be preferred to achieve an homogeneous irradiance of the crop in the alley. If we assume that trees at northern latitudes grow slower when compared to southern latitudes, then alley-cropping agroforestry is highly advisable even at high latitudes with summer crops.     

Assessment of sugar maple tree growth in relation to the partitioning of elements in xylem along a soil acidity gradient

Partitioning of elements in tree xylem is being increasingly studied, as it suggests that elements are potentially mobile within the xylem long after their uptake. A recent study revealed that only the most mobile xylem fraction (water-soluble) of base cations (calcium [Ca], magnesium [Mg], and potassium [K]) increased at higher soil acidity, while the two mobile fractions (water- and acid-soluble) of acidic metals—potentially phytotoxic aluminium (Al), cadmium (Cd) and manganese (Mn)—were significantly enhanced on very acid soils. The current paper presents an investigation of soil-wood chemistry relationships with basal area tree growth. It was hypothesized that the growth of sugar maple would be reduced by low base cation and high acidic metal concentrations in the xylem mobile fractions. Sugar maple trees (n = 55) from six watersheds in southern Quebec, Canada were analysed by sequential chemical extractions for the water-soluble, acid-soluble and residual fractions of base cations (Ca, K, Mg) and acidic metals (Al, Cd, Mn) in xylem. Generally, tree growth was positively correlated to concentrations of base cations in wood (ρ = 0.27-0.50) and soil (ρ = 0.41-0.67), and negatively correlated to concentrations of acidic metals in wood (ρ = −0.33 to −0.52) and soil (ρ = −0.67). However, these relations differed depending on the element fraction considered. Water- and acid-soluble xylem concentrations of base cations and Al were among the best predictors of growth trends (R² = 0.46-0.51). The relationship between acidic metals and tree growth is further discussed.     

Estimating balanced structure areas in multi-species forests on the Sierra Madre Occidental,Mexico

• Introduction   

This study presents a method for estimating the minimum area which exhibits a balanced diameter distribution, and the corresponding number of trees, for different tree species and forest types in the Santiago Papasquiaro region in the State of Durango, Mexico. The balanced structure area is defined as the minimum contiguous area that is required for sustainable management of a multi-sized selection forest. A multi-sized forest represents a balanced structure unit if the relationship between harvest and growth can be maintained, using a defined target diameter distribution and disregarding major natural disturbances. The study is based on 17,577 sample plots in uneven-aged forests, which are selectively harvested by local communities.     

Digital image analysis of radial shrinkage of fresh spruce (Picea abies L.) wood

Contact-free digital image analysis was performed of the radial shrinkage of fresh, fully saturated small spruce wood beams. An experimental test set-up was developed to ensure constant distance from the charge-coupled device camera to the sample surface as well as constant climate and light conditions during the whole experiment. Dimensional changes were observed immediately after the drying process began. An unexpected distinct effect could be observed which could not be explained by drying surface layers only. After a fast initial radial shrinkage a slowing down of the dimensional changes occurred at high mean moisture contents. A complete interruption of any dimensional changes followed. Finally, a recovery from shrinkage was even observed. It is assumed that strong negative pressure occurred in the fully saturated capillaries owing to dehydration which led to additional dimensional changes. As a consequence, the break of the water column and aeration in these capillaries finally resulted in a recovery period in the shrinkage rate due to the pressure release. After this effect, the dehydration was characterized by a phase of fast and almost linear shrinkage due to drying surface layers. Finally, the shrinkage slowed down to zero when reaching equilibrium moisture content.     

Does tree seedling growth and survival require weeding of Himalayan balsam (Impatiens glandulifera)?

The effect of Himalayan balsam (Impatiens glandulifera) on survival and growth of naturally regenerated silver birch (Betula pendula) and planted Norway spruce (Picea abies) and silver fir (Abies alba) seedlings was studied in a weeding experiment over 3 years. Three different treatments were applied: control, mowing, and hand weeding by pulling out the entire plant. There were no consistent treatment effects on height and diameter of the tree seedlings. The coverage of Rubus fruticosus had a negative impact on diameter increment of Norway spruce and silver fir. As opposed to growth, treatment effects on seedling survival could be found for planted Norway spruce and silver fir. However, it is very likely that these effects, namely higher seedling survival after mowing, have to be attributed to the control of bramble (Rubus fruticosus) rather than to that of Himalayan balsam. It is concluded that Himalayan balsam is not able to seriously affect the growth of already established seedlings.     

Determination of Young's modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods

Summary Dynamic methods provide rapid and accurate means to determine Young's modulus, i.e. the modulus of elasticity, of wood. For dry, clear specimens of épicéa commun (Norway spruce, picea excelsa) and sapin pictiné (silver fir, abies amabilis) we present a comparison of results from tests by a resonance flexure method with results obtained from four-point static flexure tests. For a wide range of specimen size the resonance flexure method provides a simpler, more rapidly performed alternative to the classical static flexure method, giving Young's modulus values which are for the spruce and fir specimens of this study, nearly identical to those calculated from the static flexure tests. Results are also presented which show that a resonance longitudinal method yields higher values of Young's modulus and an ultrasonic method yields still higher values. We provide also a comparison of the four test methods applied to isotropic materials.The authors wish to thank Pierre Michel and André Perrin for preparing the test specimens and components of the test apparatus for this study     

Establishment limitation of holm oak (Quercus ilex subsp. ballota (Desf.) Samp.) in a Mediterranean savanna — forest ecosystem

? Tree recruitment in Mediterranean savannas is generally hampered, in contrast with the original oak forests where these savannas are derived from. We asked whether this difference in recruitment success can be explained by differential post-dispersal survival. For one year we monitored experimentally cached holm oak acorns in a savanna — forest ecosystem in Central Spain, and recorded cache pilferage, type of pilferer, boar rooting, seedling emergence, seedling survival and the cause of mortality.

? Cache pilferage was significantly lower in savanna (8%) than in forest (21%). However, the higher cache survival was more than offset by lower seedling emergence and, particularly, by nine times higher seedling mortality in savanna, mainly due to desiccation. Wild boar rooting did not differ between experimental caches and controls without acorns, indicating that individual cached acorns do not trigger rooting activity.

? Our results indicate that the difference in post-dispersal survival between savanna and forest is due to lower emergence and, primarily, higher seedling mortality in savanna, not to higher cache pilferage. Absence of safe sites such as shrubs, abundantly present in the forest, may well explain the lack of recruitment in the savanna. Management measures appear necessary for long-term persistence of Mediterranean savannas in general.

     

Tree morphology responds to neighbourhood competition and slope in species-rich forests of subtropical China

Trees are able to respond to their local biotic and abiotic environment with morphological adjustments which improve resource acquisition and, thus, growth. In forests, light is broadly recognised as one of the major factors determining growth, and morphological responses comprise changes in crown architecture and stem stature. On sloping terrain, the interplay of phototropism and gravitropism may further affect morphological growth characteristics. However, different tree species are expected to show species-specific responses. In this study, we analysed three growth characteristics of tree individuals belonging to four species of two functional groups (evergreen: Schima superba, Castanopsis eyrei, deciduous: Quercus serrata var. brevipetiolata, Castanea henryi) in a species-rich Chinese subtropical forest. Crown projection area, relative crown displacement and stem inclination were related to biotic (local species richness, functional richness, competition, stand age) and abiotic (slope aspect and inclination, soil depth) variables in the local neighbourhood of the tree individuals. We hypothesised that (i) there are species-specific differences in the morphological response of crown architecture and stem stature and (ii) that crown size and asymmetry as well as stem inclination are influenced by both, biotic and abiotic factors. In contrast to our expectations we were unable to reveal any species-specific differences in any of the three growth characteristics. The results of mixed effects models showed that crown area was mainly affected by the target tree's dbh and biotic variables related to neighbours (competition, functional diversity), whereas stem inclination was mainly influenced by slope. Relative crown displacement was influenced by both, biotic and abiotic variables. We conclude that growth responses resulting in crown displacement and stem inclination seem to be an important mechanism to ameliorate foraging for light in our study area, but that these responses appear to be species-independent. The interplay of stem inclination and crown displacement allows for a plastic response of tree individuals in biotically and abiotically heterogeneous environments. Our results indicate that forest management in this region should focus on functionally diverse stands which are promoting crown area positively resulting in increased growth rates of individual trees.