茶树几丁质酶基因的克隆及其在干旱胁迫下的表达分析在干旱胁迫下的表达分析

以铁观音茶树叶片为材料,利用逆转录PCR及RACE法,克隆了茶树几丁质酶基因CsChi(GenBank登录号为KR078345).CsChi基因的cDNA全长为1 192 bp,包含972 bp的开放阅读框(ORF),编码323个氨基酸.生物信息学分析结果表明,CsChi蛋白的分子量为34.33 ku;理论等电点pI为8.44;原子组成为C1519H2285N413O464S18,总原子数为4 699;蛋白质结构分析显示该蛋白有6个蛋白的跨膜区域,属于跨膜蛋白;存在于细胞外;没有卷曲螺旋结构存在;CsChi基因编码的蛋白属于糖苷水解酶19家族,含有保守的ChtBD1结构域,与溶菌酶的保守结构域类似,可能兼具几丁质酶活性和溶菌酶活性,qPCR定量分析结果显示在不同干旱胁迫处理下茶树的CsChi基因的表达量,与对照组相比有所增加.推测CsChi基因在茶树干旱等逆境胁迫中起重要作用.     

基于UHPLC-Q-TOF/MS的不同产地普洱生茶化学成分差异研究

为了更加全面地了解产地对普洱生茶品质与化学成分的影响,本研究选取来自临沧市、普洱市、西双版纳州三大产区12个茶山(自然村)的普洱生茶样品,采用超高效液相色谱-四级杆-飞行时间质谱(UHPLC-Q-TOF/MS)对不同产地普洱生茶的非挥发性代谢物表型进行了研究。结果表明:不同产地普洱生茶的化学成分在含量上具有较大差异,且具有明显的产地特征。采用主成分分析,可以对来自西双版纳自治州(包括勐腊县、勐海县、景洪市)、普洱市、临沧市3个地级行政区的普洱生茶进行有效区分,也可以对来自普洱茶产区的东南、西南、西北3个区域的普洱生茶进行有效区分。进一步鉴定了普洱生茶中79种主要成分,并对其在12个茶山(自然村)的普洱生茶中的含量分布,以及与不同产地普洱生茶滋味品质的关系进行了分析。本研究表明,基于UHPLC-Q-TOF/MS的茶叶非挥发性化学成分轮廓可以作为普洱生茶产地判别的依据。     

欣试71143的特征特性及栽培技术

欣试71143是河北省河间市国欣农村技术服务总会选育的转基因抗虫棉品种,于2014年通过国家农作物品种审定委员会审定。本文主要介绍该品种的选育过程、特征特性及主要栽培技术。     

转基因抗虫棉中棉所76高效制种技术规程

总结了优质抗虫棉中棉所76高效制种技术,包括：制种田的选择、前期准备、亲本种植与管理、制种程序及注意事项等关键技术。     

优质高产棉花杂交种中棉所101

简要介绍了中棉所101的选育过程、特征特性以及高效栽培技术要点。     

化学打顶剂在甘肃棉花上的应用效果

2015年在甘肃敦煌植棉区,应用2种化学打顶剂进行不同施用时间和剂量的田间试验表明,土优塔化学打顶剂在6月28日前后、以900 mL·hm^－2的剂量使用,对棉花有较好的封顶效果,对产量及产量构成因子和纤维长度影响不大。2016年示范结果与2015年试验一致     

An investigation on the comparison of wet spinning and electrospinning: Experimentation and simulation

Polysulfonamide (PSA) has been widely used in many fields because of its excellent thermodynamic properties. In this study, PSA fibers were prepared separately via two different spinning ways, including conventional wet spinning and electrospinning. Fluid motion of wet spinning and electrostatic field of electrospinning were modeled using finite element analysis to investigate the spinning process. The properties of fabricated PSA fibers were characterized systematically by scanning electron microscope (SEM), fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), thermal gravity analysis (TGA) and electronic strength tester. Based on the simulation and theoretical analysis of spinning process, it was found that the extruding force of the wet spinning is larger than that of the electrospinning. The larger extruding force makes the alignment of macromolecules inside fiber relatively uniform, and a higher proportion of crystallization happens. Accordingly, the mechanical properties and thermal stability of PSA fibers could be improved due to a higher proportion of crystallization. The experimental results of mechanical strength and TG test are coincided with the simulation results. PSA fiber prepared by wet spinning has better thermal stability and mechanical properties than that fabricated by electrospinning.     

Improvement of toughness for the hyaluronic acid and adipic acid dihydrazide hydrogel by PEG

New applications call for many new requirements. In order to improve the toughness of aldehyde hyaluronic acid (A-HA) and adipic acid dihydrazide (ADH) hydrogel, the poly(ethylene glycol) (PEG) was added. PEG content and molecular weight have little effect on the gelation time, and the composite hydrogels can form in situ within 20 seconds at room temperature. The press test showed that the hydrogels containing PEG possessed a better compression resistance, after pressed more than five times, the composite hydrogels could restore. Rheological properties were measured to evaluate the working ability and the effect of PEG on hydrogels. By analyzing the shear viscosity (η _γ=0.01), yield stress (σ ₀) and threshold shear stress (σ _c ), the addition of PEG can make the structure of composite hydrogels get loose and improve the shear resistance. Especially, PEG800 can enhance the antishear ability obviously. The amplitude sweep tests showed a broad linear viscoelastic region, indicating a wide processing range. In the meanwhile, we also found that PEG can improve the optical transmittance of xerogel evidently.     

Improvement of ink-jet printing performances using β-cyclodextrin forming inclusion complex on cotton fabric

Cotton fabric was modified with β-cyclodextrin (β-CD) forming inclusion complex to yield color strength, pattern sharpness, and color fastness for ink-jet printing. The modified cotton fabric was confirmed with the presence of new strong absorption peaks around 1713 cm^-1 and 1243 cm^-1 in FT-IR. β-CD had been covalently grafted on cotton fabric via the esterification reaction of citric acid (CTR) with cellulose and β-CD. The results indicated that printing performances of the ink-jet printed fabric were enhanced through β-CD modification. The K/S value was enhanced from 4.21 to 6.72, the width of printed line was decreased from 1.48 mm to 1.25 mm, and the color fastness was improved to 3-4 level. These improvements were due to the truncated cone structure of β-CD, which can form inclusions with water-based pigment. Meanwhile, the crease recovery performance was also improved with the aid of CTR. A comparison between the unmodified and modified cotton fabric suggested that the crease recovery angle of β-CD modified cotton fabric was increased by 25.0 % in the warp direction. Therefore, printing performance and crease recovery performance of β-CD modified and water-based pigment printed cotton fabric were enhanced remarkably.     

Effect of nitrogen root zone fertilization on rice yield,uptake and utilization of macronutrient in lower reaches of Yangtze River,China

Improper application of nitrogen (N) has led to high N losses and low N use efficiency in the lower reaches of Yangtze River in China. An effective method to solve such problems is the deep fertilized N in root zone (RZF). Limited information is available on the effect of RZF on the uptake of macronutrients (N, P and K) and rice yield. Field experiments, conducted from 2014 to 2015, compared the farmer fertilizer practice (FFP, with 225 kg ha^?1 of N, split into three doses) and RZF using the same rate but placing N 5 cm away from rice roots in holes 10 cm deep (RZF10) or 5 cm deep (RZF5) as a single application. The highest mean yield (10.0 t ha^?1) was obtained in RZF10, which was 19.5% more than that in FFP. Root zone fertilization of urea (whether 10 cm deep or 5 cm deep) resulted in greater accumulation of N, P and K in stem, leaf sheaths, leaf blades and grains compared to that in FFP in sandy and in loam soils. The uptake of N, P and K was the highest in RZF10 (average at 176.7, 66.2 and 179.1 kg ha^?1, respectively), higher than that in FFP by 45.0, 17.0 and 22.6%, respectively. N apparent recovery efficiency was markedly higher in RZF10 (53.1%) than in FFP (27.5%). RZF10 significantly increased the N, P, K uptake compared with FFP under different N rates in both sandy and loam soils. These results suggest that the N, P and K input amount should be re-determined under RZF.