Thorium-230 ages of corals and duration of the last interglacial sea-level high stand on oahu, hawaii

Thorium-230 ages of emergent marine deposits on Oahu, Hawaii, have a uniform distribution of ages from approximately 114,000 to approximately 131,000 years, indicating a duration for the last interglacial sea-level high stand of approximately 17,000 years, in contrast to a duration of approximately 8000 years inferred from the orbitally tuned marine oxygen isotope record. Sea level on Oahu rose to >/=1 to 2 meters higher than present by 131,000 years ago or approximately 6000 years earlier than inferred from the marine record. Although the latter record suggests a shift back to glacial conditions beginning at approximately 119,000 years ago, the Oahu coral ages indicate a near present sea level until approximately 114,000 years ago.     

Leaf photosynthetic characteristics of beech (Fagus sylvatica) saplings during three years of exposure to elevated CO(2) concentration

Beech (Fagus sylvatica L.) seedlings were cultivated from seeds sown in pots or directly in the ground in outdoor chambers that were transparent to solar radiation, and provided either ambient air or CO(2)-enriched air (ambient + 350 &mgr;mol mol(-1)). The rooting volume was high in all experiments. In the short-term experiment, potted plants were assigned to a factorial CO(2) x nutrient treatment (optimal nutrient supply and severe nutrient shortage) for 1 year. In the long-term experiment, plants were grown directly in the ground and received an optimal supply of water and nutrients in both CO(2) treatments for 3 years. Nutrient stress caused carboxylation capacity (V(m)) to decrease in the potted seedlings exposed to CO(2)-enriched air during their first growing season. In the long-term experiment with optimal nutrient supply, CO(2)-enriched air did not affect V(m), but caused an upward acclimation of maximum electron transport rate (J(m)). Consequently, there was a 14% increase in the J(m)/V(m) ratio, indicating nitrogen reallocation to maintain an equilibrium between RuBP consumption and RuBP regeneration. Both V(m) and J(m) decreased during the growing season in both CO(2) treatments. Although upward acclimation of J(m) was no longer apparent at the end of the third growing season, plants in CO(2)-enriched air maintained a higher J(m)/V(m) ratio than plants in ambient air, indicating that photosynthetic acclimation always occurred. Second flush leaves appeared during each growing season. When expressed on the basis of foliar nitrogen concentration, their photosynthetic characteristics (V(m) and J(m)) were enhanced compared with other leaves. Because the number of second flush leaves was also increased in the elevated CO(2) treatment, this response should be taken into account when modeling the effects of elevated CO(2) concentration on canopy photosynthesis. Stomatal conductance decreased in response to atmospheric CO(2) enrichment; however, the stomatal response to irradiance followed a single relationship based on two stomatal conductance models.     

Phenol-formaldehyde resin curing and bonding under dynamic conditions

Summary To better understand the curing and bonding behavior of phenol-formaldehyde (PF) resin under dynamic conditions, flakeboards were manufactured either by conventional pressing at 7% or 12% mat moisture content or by steam injection pressing with 10 or 20 seconds steaming duration. Resin-impregnated glass-cloth samples and lap-shear tension specimens were embedded in the core of each flakeboard. After the flakeboards were pressed for various periods of times, the samples and specimens were quickly retrieved. The degree of resin cure was determined on the resin-impregnated glass-cloth samples by dynamic mechanical analysis. The bond strengths were measured from the lap-shear tension specimens on a mechanical testing machine. The results of resin curing and bonding were then correlated to the performance of the resin-bonded boards, which were evaluated by internal bond, modulus of rupture, modulus of elasticity, and thickness swelling. Resin curing and lap-shear bonding did not proceed simultaneously. In conventional pressing, the mat moisture content (MC) at 12% favored resin curing, but slightly retarded lap-shear bonding, as compared to 7%MC. In steam injection pressing, the rates of resin curing and lap-shear bond strength development were much faster for 20 seconds than for 10 seconds of steaming duration. Longer press times were needed to obtain boards with maximum strength in the 12%MC conventional pressing and the 20-s steam duration steam injection pressing than in those conditions where moisture content was lower or steam time was less. The need for longer press times must be attributed to higher internal vapor pressures and/or lower wood and resin component strengths, rather than to incomplete cure or bonding.This material is based on work supported by the Ministry of International Affairs, Quebec Government, the Natural Sciences and Engineering Research Council of Canada, and Laval University (Quebec City). The work was also supported by the U.S. Department of Agriculture under research joint venture agreement FP-92-1835     

Vernalization gene combination to maximize grain yield in bread wheat (Triticum aestivum L.) in diverse environments

The major vernalisation genes of VRN1 are well understood at the molecular level. However, their quantitative contributions to flowering time and grain yield related traits are not clear. In this study, we used a double haploid population (225 lines) of Westonia × Kauz in which the Vrn-A1a (Westonia), Vrn-B1a (Westonia) and Vrn-D1a (Kauz) were segregating, and a high resolution genetic map of 1,159 loci, to determine the quantitative contributions of Vrn-A1a, Vrn-B1a and Vrn-D1a for the days to anthesis and grain yield related traits in diverse environments. The major quantitative trait loci (QTL) of spikelet number per spike and days to anthesis were contributed by the winter alleles of VRN1. The QTL of the time of grain filling were contributed by the spring alleles of VRN1. The wild genotype (vrn-A1vrn-B1vrn-D1) showed the latest flowering, the highest spikelet number per spike, lowest peduncle proportion and thousand grain weight in three environmental analyses, and the largest spikelet number per spike, which resulted in high kernel number per spike (KN) and grain weight (GW) in well-watered environments. One QTL of KN was located on 5B, contributed by winter allele of vrn-B1 in three environmental analyses, and one GW QTL was detected on 5A, contributed by the spring allele of Vrn-A1a in a drought environment. The results indicated that the genotype Vrn-A1avrn-B1Vrn-D1a would shorten the time to anthesis and give high GW and KN in drought environments. The early anthesis associated phenotype, peduncle proportion would provide an indicator in breeding programs.     

Bioindication and modelling of atmospheric deposition in forests enable exposure and effect monitoring at high spatial density across scales

Key message

Moss surveys provide spatially dense data on environmental concentrations of heavy metals and nitrogen which, together with other biomonitoring and modelling data, can be used for indicating deposition to terrestrial ecosystems and related effects across time and areas of different spatial extension.

Context

For enhancing the spatial resolution of measuring and mapping atmospheric deposition by technical devices and by modelling, moss is used complementarily as bio-monitor.

Aims

This paper investigated whether nitrogen and heavy metal concentrations derived by biomonitoring of atmospheric deposition are statistically meaningful in terms of compliance with minimum sample size across several spatial levels (objective 1), whether this is also true in terms of geostatistical criteria such as spatial auto-correlation and, by this, estimated values for unsampled locations (objective 2) and whether moss indicates atmospheric deposition in a similar way as modelled deposition, tree foliage and natural surface soil at the European and country level, and whether they indicate site-specific variance due to canopy drip (objective 3).

Methods

Data from modelling and biomonitoring atmospheric deposition were statistically analysed by means of minimum sample size calculation, by geostatistics as well as by bivariate correlation analyses and by multivariate correlation analyses using the Classification and Regression Tree approach and the Random Forests method.

Results

It was found that the compliance of measurements with the minimum sample size varies by spatial scale and element measured. For unsampled locations, estimation could be derived. Statistically significant correlations between concentrations of heavy metals and nitrogen in moss and modelled atmospheric deposition, and concentrations in leaves, needles and soil were found. Significant influence of canopy drip on nitrogen concentration in moss was proven.

Conclusion

Moss surveys should complement modelled atmospheric deposition data as well as other biomonitoring approaches and offer a great potential for various terrestrial monitoring programmes dealing with exposure and effects.

     

Near‐infrared spectroscopy can predict the composition of organic matter in soil and litter

The usefulness and limitations of near‐infrared reflectance spectroscopy (NIRS) for the assessment of several soil characteristics are still not sufficiently explored. The objective of this study was to evaluate the ability of visible and near‐infrared reflectance (VIS‐NIR) spectroscopy to predict the composition of organic matter in soils and litter. Reflectance spectra of the VIS‐NIR region (400–2500 nm) were recorded for 56 soil and litter samples from agricultural and forest sites. Spectra were used to predict general and biological characteristics of the samples as well as the C composition which was measured by ¹³C‐CPMAS‐NMR spectroscopy. A modified partial least‐square method and cross‐validation were used to develop equations for the different constituents over the whole spectrum (1st to 3rd derivation). Near‐infrared spectroscopy predicted well the C : N ratios, the percentages of O‐alkyl C and alkyl C, the ratio of alkyl C to O‐alkyl C, and the sum of phenolic oxidation products: the ratios of standard deviation of the laboratory results to standard error of cross‐validation (RSC) were greater than 2, the regression coefficients (a) of a linear regression (measured against predicted values) ranged from 0.9 to 1.1, and the correlation coefficients (r) were greater than 0.9. Satisfactorily (0.8 ≤ a ≤ 1.2, r ≥ 0.8, and 1.4 ≤ RSC ≤ 2.0) assessed were the contents of C, N, and production of DOC, the percentages of carbonyl C and aromatic C and the ratio of alkyl C to aromatic C. However, the N‐mineralization rate and the microbial biomass were predicted unsatisfactorily (RSC < 1.4). The good and satisfactory predictions reported above indicate a marked usefulness of NIRS in the assessment of biological and chemical characteristics of soils and litter.     

Dietary selenate versus selenite for cattle, sheep, and horses.

Food and Drug Administration regulations currently permit addition of .3 mg of Se per kilogram of diet for chickens, turkeys, ducks, swine, sheep, and cattle. However, field reports indicate that this level may not be adequate for ruminants in all situations. Because sodium selenite is the most common supplemental form and is known to be readily absorbed to particles or reduced to insoluble elemental Se or selenides in acid, anaerobic environments, studies were conducted with dairy cattle, sheep, and horses fed sodium selenate to determine whether Se from this source was more bioavailable than Se from sodium selenite. A 2-wk period of no Se supplementation was followed by 49 or 56 d of Se supplementation at .3 mg/kg of dietary DM. Serum Se concentrations and glutathione peroxidase (GSHPx) activities measured initially and periodically thereafter revealed no difference between Se forms in sheep and horses and only a small (P less than .05) advantage for selenate in supporting serum Se concentration in dairy cattle. Selenium concentrations in skeletal muscle and liver of sheep were not different between Se forms. Serum Se, but not GSHPx, increased with time, and .3 mg of supplemental Se per kilogram of dietary DM from either sodium selenate or sodium selenite supported normal serum Se concentrations in sheep, dairy cattle, and horses.