Regional distribution and integrity of equine ovarian pre‐antral follicles

The goal of this study was to determine the distribution of pre‐antral follicles in the ovarian parenchyma of mares. For Experiment 1, each ovary was cut longitudinally at the greater curvature, performing two hemiovaries. After that, six fragments from each hemiovary were obtained, resulting in 12 fragments, which were divided into the innermost region of the parenchyma, the middle region and the outermost region. All the three obtained sections were cut transversally to obtain two fragments from each one. For Experiment 2, each ovary also submitted to a longitudinal cut on the greater curvature, forming two hemiovaries. Each hemiovary was sectioned into four symmetrical fragments, resulting in eight fragments per ovary. The fragments were related as being near to or far from the ovulatory fossa. The fragments of both experiments were immediately fixed in Carnoy for 12 hr and kept in 70% ethanol for 24 hr. Follicles were classified according to the stages of development and for morphological integrity according to oocyte morphology and granulosa cells. After the histological assessment, a total of 1,130 follicles were visualized from Experiment 1, being 1,054 (93.3%) primordial follicles and 76 (4.7%) follicles in development. The innermost region had the highest percentage of pre‐antral follicles compared to the other regions (p < .05). The middle and outermost regions showed higher percentages of intact primordial and developing follicles than the innermost region (p < .05). Considering Experiment 2, 938 follicles were found, being 894 (95.3%) primordial and 44 (4.7%) follicles in development. The region near the ovulatory fossa presented higher (58.7%; 551 of 938) follicular concentration compared to the region far from the ovulatory fossa (41.3%; 387 of 938; p < .05). As a conclusion, distribution of pre‐antral follicles in the equine ovary has a specific pattern through the parenchyma. Also, the follicular integrity differed in the studied ovarian areas.     

Are Endocrine Disrupting Compounds a Threat to Farm Animal Health,Welfare and Productivity?

Contents The sources and characteristics of endocrine disrupting compounds (EDCs) are reviewed and discussed with respect to their potential effects on farm animal health, welfare and productivity. The importance of certain properties of these compounds in relation to the expression of their biological effects is addressed together with potential routes of exposure. It is concluded that little is known of factors affecting the tissue concentrations of EDCs in farm animals, the concentrations that are required to perturb physiological function in these species, the effects of prolonged exposure to low doses, the effect of cocktails of EDCs and other pollutants or the responses of specific organs and physiological systems that are affected by EDCs. Much of the available information pertaining to EDCs is derived from epidemiological studies of wildlife species and from laboratory animal studies and while these studies have significant limitations, they are considered to be valuable indicators of potential effects in farm animal species. The results of such studies, together with the small amounts of data from studies of ruminants, indicate that there may be significant effects of exposure to environmental levels of EDCs on farm animal health, even although effects are not generally apparent in practice, at this time.     

Genetic variations and interrelationships in Vanilla planifolia and few related species as expressed by RAPD polymorphism

Vanilla is naturally distributed in Mexico and parts of Central America and the history of origin of cultivated vanilla suggests that the entire stock outside Mexico may be from a single genetic source. In the present study, RAPD polymorphism was used to estimate the level of genetic diversity and interrelationships among different collections of Vanilla planifolia Andr., and few related species, including both leafy and leafless types such as V. tahitensis J.W.Moore, V. andamanica, Rolfe, V. pilifera Holtt., and V. aphylla Blume. Studies revealed that there are very limited variation within collections of V. planifolia, indicative of its narrow genetic base, and of the related species we tested, V. tahitensis is nearest to V. planifolia. The species studied are diverse and have a similarity ranging from 1.2 to 57.3 %. Of the sampled taxa, V. andamanica is the most divergent and there is also reasonable variability within its collections, indicating the possibility of natural seed set. A total of 82 polymorphic bands expressed in the RAPD profiles were used to generate a genetic distance matrix, which was then used in cluster analysis. Specific groupings were revealed by the cluster analysis whereby the leafless forms (V. aphylla, V. pilifera and the new species) and V. andamanica formed separate clusters. This is the first report of species interrelationship studies, including both cultivated and wild vanilla species.     

Antimicrobial stewardship in the dairy industry: responding to the threat of antimicrobial resistance

Dairy Australia is the national service body for the Australian dairy industry. Its role is to help farmers adapt to a changing operating environment and achieve a profitable, sustainable dairy industry. Although the use of antibiotics in Australian agriculture is relatively low in global terms, Dairy Australia recognises important drivers for continuous improvement in antimicrobial stewardship (AMS). Dairy Australia’s first strategic priority is to support profitable farms. This priority has driven the development of a range of on‐farm change management programs in the animal health and welfare fields to optimise the unit cost of production and dairy cattle welfare. Dairy Australia’s third strategic priority is to further develop a ‘trusted dairy industry’. Previous and current work under these two strategies position the dairy industry favourably with respect to confronting the challenge of antimicrobial resistance (AMR) and supporting sound AMS with the guiding principle of ‘as little as possible, as much as necessary’. However, given an incomplete but ongoing threat of AMR, more work is needed. Supported by Dairy Australia, the dairy industry has developed an antimicrobial use strategy aligning with the Australian Animal Sector National AMR Plan 2018.     

Long-term productivity growth and sustainability of Greek irrigated agriculture

The present study examines the long-term productivity growth and sustainability of Greek irrigated agriculture. A log linear trend model was used to measure long-term productivity growth, and the total factor productivity (TFP) approach measures the sustainability of the irrigated production system. A time series database of inputs and outputs data were used for the production period of 1961?–?2001 (41 years) which revealed that there is an increasing trend in the irrigated area of the country. The annual growth rate of the irrigated area is 2.6% during this time period. The long-term trends in yields of crops grown in irrigated agriculture are positive. Fertilizer use rate per ha sharply increases during this period. The productivity of irrigated Greek agriculture also increases over the time period as a result of the introduction of High Yielding Variety (HYV), seed, fertilizer and water technology. The measurement of TFP indices indicates that the long-term trend in productivity growth of irrigated Greek agricultural system is positive. The result implies that the irrigated Greek agricultural production system has long-term sustainability. The result also indicates that fertilizer, fixed capital, rainfall and temperature are positively contributing to the mean production of Greek irrigated agriculture. On the other hand, pesticide, labour and fixed capital reduces variability of irrigated agriculture. To this end, long-term agricultural sustainability depends on patterns of input use.     

Genetic diversity of Syrian pistachio (<Emphasis Type="Italic">Pistacia vera</Emphasis> L.) varieties evaluated by AFLP markers

Pistachio (Pistacia vera L.) is a strategic nut tree species in the Middle East which holds comparative advantage over other fruit trees in view of its hardiness, income generation opportunities and benefits for the ecosystem. Yet pistachio cultivation depends on a very narrow genetic base, in spite of the existence of many varieties still marginally exploited. Syria is an important center of diversity for pistachio. A country wide ecogeographic survey in this country was carried out to determine the extent of pistachio genetic diversity and its use. As a whole, 114 accessions were collected from 37 farms to assess diversity at morphological and molecular level. Molecular evaluation was carried out using Amplified Fragment Length Polymorphism (AFLP) technique and performed using seven primer pair combinations. Results from the studies allowed the identification of 25 pistachio female varieties in Syria, some of which unique and described for the first time. Three groups of pistachio diversity were identified by cluster analysis which provides useful information about the distribution of genetic diversity in Syria for enhanced use and sustainable conservation.     

A Chemoautotrophically Based Cave Ecosystem

Microbial mats discovered in a ground-water ecosystem in southern Romania contain chemoautotrophic bacteria that fix inorganic carbon, using hydrogen sulfide as an energy source. Analysis of stable carbon and nitrogen isotopes showed that this chemoautotrophic production is the food base for 48 species of cave-adapted terrestrial and aquatic invertebrates, 33 of which are endemic to this ecosystem. This is the only cave ecosystem known to be supported by in situ autotrophic production, and it contains the only terrestrial community known to be chemoautotrophically based.     

Growth of SiO2 at room temperature with the use of catalyzed sequential half-reactions

Films of silicon dioxide (SiO2) were deposited at room temperature by means of catalyzed binary reaction sequence chemistry. The binary reaction SiCl4 + 2H2O --> SiO2 + 4HCl was separated into SiCl4 and H2O half-reactions, and the half-reactions were then performed in an ABAB ellipsis sequence and catalyzed with pyridine. The pyridine catalyst lowered the deposition temperature from >600 to 300 kelvin and reduced the reactant flux required for complete reactions from approximately 10(9) to approximately 10(4) Langmuirs. Growth rates of approximately 2.1 angstroms per AB reaction cycle were obtained at room temperature for reactant pressures of 15 millitorr and 60-second exposure times with 200 millitorr of pyridine. This catalytic technique may be general and should facilitate the chemical vapor deposition of other oxide and nitride materials.     

Evaluation of limb autotomy as a promising strategy to improve production performances of mud crab (Scylla olivacea) in the soft‐shell farming system

Soft‐shell crab, a newly moulted crab having non‐calcified and hydrated soft exoskeleton, farming has been increasing tremendously in recent years throughout the world due to its high market price and consumer preferences. However, high aggressiveness and cannibalistic behaviour of mud crab limit its culture to an individual chamber system which ultimately makes the soft‐shell mud crab farming space and labour‐intensive. Therefore, the aim of this study was to improve the efficiency of soft‐shell crab production by autotomy of the claw and/or walking legs to reduce the moulting duration and intensify the culture system through double stocking in the existing individual chamber culture system. To achieve our objectives, a series of experiment were conducted at both indoor and on‐farm levels by removing the claw and/or walking legs of Scylla olivacea for two consecutive moulting cycles. Results showed that both claw ablation significantly (p < .01) shortened the moulting duration and increased the carapace width, weight gain, specific growth rate, feeding efficiency and yield parameter compared to the non‐ablated crabs more prominently at 1st moulting than the 2nd moulting in both indoor and on‐farm trials. Ablation of all walking legs while keeping the claw intact did not significantly influence (p > .05) the moulting duration and carapace width, but significantly (p < .01) improved the specific growth rate, weight gain, feeding efficiency and yield parameters at 1st moulting compared to the non‐ablation and unilateral three walking leg ablation groups. However, ablation of all appendages (both claw and walking legs) showed significant (p < .01) improvements of carapace width, weight gain, specific growth rate, feeding efficiency and yield parameters, and shortened the moulting duration up to 23 days from 34 days during 1st moulting and up to 27 days from 40 days at 2nd moulting. The survivals of different autotomized mud crabs were statistically non‐significant (p > .05) to the non‐autotomized crabs in various indoor and on‐farm trials. Besides improving the production performances, ablation of bilateral claw and all appendages allowed to double the stocking density in the existing individual chamber‐based soft‐shell crab farming that enhanced the production about threefold higher than the existing individual chamber‐based culture system. Finally, our results suggest that autotomy could be a promising technology for the commercial farming of soft‐shell mud crab in near future.