Influence of noncellulosic contents on nano scale refinement of waste jute fibers for reinforcement in polylactic acid films

In the present study, nanofibrils of cellulose are extracted from waste jute fibers using high energy planetary ball milling process in wet condition. The rate of refinement of untreated fibers having non-cellulosic contents was found slower than treated fibers due to strong holding of fiber bundles by non-cellulosic contents. At the end of three hours of wet milling, untreated fibers were refined to the size of 850 nm and treated fibers were refined to the size of 443 nm. In the subsequent stage, composite films of poly lactic acid (PLA) were prepared by solvent casting with 3 wt% loading of untreated jute nanofibrils, treated jute nanofibrils and microcrystalline cellulose. The influence of non-cellulosic contents on mechanical properties of PLA films are investigated based on results of tensile test, dynamic mechanical analysis and differential scanning calorimetry. The maximum improvement was observed in case of treated jute nanofibril/PLA composite film where initial modulus and tensile strength increased by 207.69 % and 168.67 %, respectively as compared to neat PLA film. These improvements are attributed to the increased interaction of treated jute nanofibrils with PLA matrix due to their higher precentage of cellulosic contents and mechanically activated surface.     

Role of micronutrients on quantitative traits and prospects of its accumulation in linseed (Linum usitatissimum L.)

The adequate growth of plants can be achieved only by a balanced ratio of biologically active nutrients in soil along with its readily availability. Linseed seems to be an advantageous secondary oilseed crop widely used in industrial purposes, which can serve additional purpose of phytoextraction of heavily infested soils with heavy metals. In this study, we have made an effort to find out the optimum dose of heavy metals necessary as micronutrients like copper (Cu), iron (Fe) and zinc (Zn) for the enhancement of linseed yield along with the distribution of heavy metals in different plant parts. Quantitative enhancement in different traits of linseed plant due to Cu, Fe and Zn fertilization especially for capsules per plant after maturity suggested positive association between heavy metal supply and morphological traits, which indirectly enhanced seed yield. There was a positive correlation between Zn supply and seed yield. In the treatments with Cu and Fe fertilization, seed yield was positively correlated to plant height, capsules per plant and seeds per five capsules. According to this study, it is concluded that linseed has the ability to accumulate majorly Fe followed by Cu and Zn.     

Influence of forest tree species on reclamation of semiarid sodic soils

Tree plantation is a proven strategy to improve the salt‐affected soils. However, the efficiency of trees to reclaim the soil varies from species to species. This study was therefore, carried out with the objective of assessing the efficiency of 3‐yr old plantations of Prosopis juliflora (Swartz) D.C. (Mesquite), Eucalyptus tereticornis Sm. (Forest Red Gum) and Dalbergia sissoo Roxb. Ex. D.C. (Indian Rosewood) to improve the sodic soil characteristics in Sultanpur districts of Uttar Pradesh, India (26°10′–26°23′N, 81°50′–82°5′E). Soil samples collected from six depths; 0.0–0.1, 0.1–0.3, 0.3–0.6, 0.6–0.9, 0.9–1.2 and 1.2–1.5 m below the surface, were analysed for chemical and physical properties by following standard methods. The infiltration rate (IR) was determined by double concentric infiltrometer and the permeability by constant head permeameter. The trees were measured for their girth at breast height (at 1.33 m from ground) and crown area within a 100 × 100 m sector at each of the sites selected. There were decreases in soil pH (from 10.06 to 9.64) and exchangeable sodium percentage (from 70.6 to 26.9) at the P. juliflora plantation relative to the E. tereticornis and D. sissoo plantations. The organic carbon and nitrogen content increased from 2.0 and 0.18 g/kg to 3.9 and 0.45 g/kg under P. juliflora at the surface (0.0–0.1 m) layer. There was also more exchangeable Ca²⁺, Mg²⁺and K⁺ at exchange sites and a reduction in exchangeable Na⁺ 3 yr after establishing the plantations. There was a significant decrease in surface soil (0.1 m) bulk density from 1.66 to 1.37 (t/m³) but an increase in porosity from 41.2 to 46.3% and water holding capacity from 4.3 to 4.8 g/kg. The IR and soil permeability also increased after 3 yr of tree growth. Prosopis juliflora proved more effective than E. tereticornis and D. sissoo in its ability to enrich a sodic soil with organic matter and establishing better soil–water characteristics.     

An evaluation of furrows for managing soil and water loss from a shallow Alfisol under simulated rainfall

Furrows are widely used in rainfed areas of semi-arid India for soil and water conservation. The orientation of furrows, either down or across slope, and their spacing influence the effectiveness of furrows as soil and water conservation measures. We evaluated treatments with furrows aligned down and across 3% sloping land at spacings of 90, 60 and 30 cm under simulated rainfall intensities of 80 and 100 mm/h on a shallow Alfisol. A bare plot without any furrows was considered as a control. A large (24 m × 3 m) rainfall simulator developed at the Central Research Institute for Dryland Agriculture (CRIDA), Hyderabad, was used for this controlled study. Run-off was measured by a calibrated tipping bucket run-off recorder. The effects of the treatments on peak flow rate (L/s), sediment loss with run-off water (kg/ha/mm), peak sediment concentration (g/L), run-off (per cent rainfall) and time to peak (min) were investigated. When compared with the control (no furrows), across slope furrowing with 60- and 30-cm spacing reduced sediment yields by 19.9 and 21.3 kg/ha/mm of run-off, respectively, under a rainfall intensity of 80 mm/h and 24 and 25.3 kg/ha/mm of run-off, respectively, under a rainfall intensity of 100 mm/h. For the control, sediment loss was 50.72 kg/ha/mm run-off and 56.68 kg/ha/mm run-off for rainfall intensities of 80 and 100 mm/h, respectively. Similar trends were recorded from observations of peak flow, time to peak and peak sediment concentration. Run-off hydrographs demonstrated the conservation value of across slope furrowing by delaying run-off initiation, reducing run-off and slowly releasing the run-off after the cessation of rainfall. The results show that furrow orientation has major effects on reducing run-off, whereas furrow spacing has insignificant effects.     

Tillage Effects on Crop Yield and Physicochemical Properties of Sodic Soils

Tillage modifies soil structure and has been suggested as a practice to improve physical, hydrological and chemical properties of compacted soils. But little is known about effect of long‐term tillage on physicochemical soil properties and crop yield on sodic soils in India. Our objective was to investigate the effect of different tillage regimes on crop yield (wheat and paddy rice) and physicochemical properties of sodic soils. Two sodic sites under conventional tillage for 5 (5‐YT; 5‐year tillage) and 9 (9‐YT; 9‐year tillage) years were selected for this study. Changes in crop yield and physicochemical soil properties were compared with a control, sodic land without any till history, that is, 0‐year tillage/untilled (0‐YT). Five replicated samples at 0‐ to 10‐cm and 10‐ to 20‐cm soils depths were analysed from each site. In the top, 0‐ to 10‐cm soil depth 5‐YT and 9‐YT sites had higher particle density (Pd), porosity, water holding capacity, hydraulic conductivity, organic carbon, total nitrogen (N_t), available nitrogen (N_avail), phosphorus (P_avail) and exchangeable calcium (Exch. Ca⁺⁺) than 0‐YT, whereas bulk density (Bd), C : N ratio and CaCO₃ were significantly lower. Bd, pH, EC and CaCO₃ increased significantly with depth in all the lands, whereas Pd, porosity, water holding capacity, hydraulic conductivity, organic carbon, N_t, N_avail, P_avail and Exch. Ca⁺⁺ decreased. We conclude that continuous tillage and cropping can be useful for physical and chemical restoration of sodic soils. Copyright © 2014 John Wiley & Sons, Ltd.     

Genetic basis of seedling-resistance to leaf rust in bread wheat 'Thatcher'

The bread wheat cultivar ‘Thatcher’ is documented to carry the gene Lr22b for adult‐plant resistance to leaf rust. Seedling‐resistance to leaf rust caused by Puccinia triticina in the bread wheat cultivar ‘Thatcher’, the background parent of the near‐isogenic lines for leaf rust resistance genes in wheat, is rare and no published information could be found on its genetic basis. The F₂ and F₃ analysis of the cross ‘Agra Local’ (susceptible) × ‘Thatcher’ showed that an apparently incompletely dominant gene conditioned seedling‐resistance in ‘Thatcher’ to the three ‘Thatcher’‐avirulent Indian leaf rust pathotypes – 0R8, 0R8‐1 and 0R9. Test of allelism revealed that this gene (temporarily designated LrKr1) was derived from ‘Kanred’, one of the parents of ‘Thatcher’. Absence of any susceptible F₂ segregants in a ‘Thatcher’ × ‘Marquis’ cross confirmed that an additional gene (temporarily designated LrMq1) derived from ‘Marquis’, another parent of ‘Thatcher’, was effective against pathotype 0R9 alone. These two genes as well as a second gene in ‘Kanred’ (temporarily designated LrKr2), which was effective against all the three pathotypes, but has not been inherited by ‘Thatcher’, seem to be novel, undocumented leaf rust resistance genes.     

A leaf rust resistance gene, different from Lr34, associated with leaf tip necrosis in wheat

The gene Lr34 has contributed to durable resistance to leaf rust caused by Puccinia triticina in wheat worldwide. The closely associated leaf tip necrosis is generally used as the gene's marker. Lr34 has been postulated in many Indian bread wheat cultivars including ‘C 306’, based on the associated leaf tip necrosis and a few other field and glasshouse observations. The present study showed monogenic control of adult‐plant resistance in ‘C 306’ to leaf rust pathotype 77‐5 (121R63‐1). The F₂ segregation in the crosses between ‘C 306’ and the two known carriers of Lr34, ‘Line 897’ and ‘Jupateco 73’‘R’ fitted a digenic ratio. The F₃ families derived from the susceptible F₂ segregants were true breeding for susceptibility, proving the absence of Lr34 in ‘C 306’. The cross between ‘Line 897’ and ‘Jupateco 73’‘R’ did not segregate for susceptibility. Resistance in the cross ‘Agra Local’ (susceptible) × ‘C 306’ was associated with leaf tip necrosis, showing that the leaf rust resistance gene in ‘C 306’ was associated with leaf tip necrosis, but was different from Lr34. This gene is being temporarily designated as Lr‘C 306’. Hence, leaf tip necrosis cannot be considered as an exclusive marker for selecting Lr34 in wheat improvement.     

The linkage between the stem rust resistance gene Sr2 and pseudo-black chaff in wheat can be broken

Recessively inherited gene Sr2 has provided the basis of durable resistance to stem rust (caused by Puccinia graminis tritici) in wheat (Triticum aestivum L.) worldwide. The associated earhead and stem melanism or ‘pseudo‐black chaff’ is generally used as a marker for this gene. Sr2 has been postulated in many wheat cultivars of India including ‘Lok 1’, based on associated pseudo‐black chaff in adult plants, and leaf chlorosis in seedlings. However, dominant inheritance of the resistance factor operating in ‘Lok 1’, and a 13 : 3 (resistant : susceptible) F₂ segregation in the ‘Sr2‐line’ (‘Chinese Spring’⁶ × ‘Hope’ 3B) × ‘Lok 1’ cross confirmed that Sr2 was absent in ‘Lok 1’. Susceptible plants with a pseudo‐black chaff phenotype were observed in F₂ populations of ‘Agra Local’ (susceptible) × ‘Lok 1’, and the ‘Sr2‐line’ × ‘Lok 1’ crosses. Most of the F₃ families derived from the susceptible F₂ segregants with pseudo‐black chaff phenotypes were true breeding for the expression of pseudo‐black chaff with susceptibility to stem rust. Thus, linkage of pseudo‐black chaff with Sr2 in wheat can be broken, and hence, caution may be exercised in using pseudo‐black chaff as a marker for selecting Sr2 in breeding programmes.