Determination by near-infrared spectroscopy of perseitol used as a marker for the botanical origin of avocado (Persea americana Mill.) honey

This paper reports the application of near-infrared (NIR) reflectance spectroscopy to determine the concentration in honey of perseitol, a sugar that is specific to avocado honey. Reference values for perseitol were obtained by high-performance liquid chromatography analysis in 109 honey samples. Although the average concentration of perseitol in honey samples was only 0.48%, accurate prediction equations were successfully developed. The regression model of modified partial least squares was superior to that of principal component regressions. Calibrations based on the first or second derivative of Log(1/R) were equally good (R(2) > 0.95). Using half of the samples for calibration and the second half for validation, the correlation between actual and predicted values of the second half was satisfactory (R(2) = 0.87), the slope did not differ from 1, bias was low (0.005%), and the standard error of prediction was relatively low (0.13%). It was concluded that NIRS analysis may be used to detect to what extent honeybees have harvested avocado nectar but not to authenticate avocado honey as unifloral.     

A Male Genetic Map Designed for Quantitative Trait Loci Mapping in Norwegian Cattle

A male bovine linkage map was constructed using six half-sib families of the Norwegian Cattle population. The family material consisted of six sires and 285 sons, with the number of sons per sire ranging from 32 to 71. Of the 288 markers analysed, 261 were anonymous microsatellites and 27 were coding genes. Eleven of the coding genes were mapped by a two-step procedure involving intron/exon sequencing in the six sires and development of polymerase chain reaction-based methods for efficient genotyping in heterozygous families. Linkage analysis including both informative and non-informative sons was performed in order to obtain unbiased estimates of recombination fractions. The autosomal genome length of the Norwegian Cattle Map (NCM) was estimated as 2682 cM, with an average interval of 12.5 cM. The map provides sufficient marker density for scanning the whole bovine genome to locate quantitative trait loci. The large number of common markers between NCM and previously published maps will contribute to the comparison and integration of bovine maps.     

Effect of different blood‐guided conditioning programmes on skeletal muscle ultrastructure and histochemistry of sport horses

The effects of three different blood‐guided conditioning programmes on ultrastructural and histochemical features of the gluteus medius muscle of 2‐year‐old sport horses were examined. Six non‐trained Haflinger horses performed three consecutive conditioning programmes of varying lactate‐guided intensities [velocities eliciting blood lactate concentrations of 1.5 (v_1.5), 2.5 (v_2.5) and 4 (v₄) mm respectively] and durations (25 and 45 min). Each conditioning programme lasted 6 weeks and was followed by a 5‐week resting period. Pre‐, post‐ and deconditioning muscle biopsies were analysed. Although training and detraining adaptations were similar in nature, they varied significantly in magnitude among the three different conditioning programmes. Overall, the adaptations consisted in significant increases in size of mitochondria and myofibrils, as well as a hypertrophy of myofibrillar ATPase type IIA muscle fibres and a reduction in number of type IIx low‐oxidative fibres. Together, these changes are compatible with a significant improvement in both muscle aerobic capacity and muscle strength. The use of v_1.5 and v_2.5 as the exercise intensities for 45 min elicited more significant adaptations in muscle, whereas conditioning horses at v₄ for 25 min evoked minimal changes. Most of these muscular adaptations returned towards the pre‐conditioning status after 5 weeks of inactivity. It is concluded that exercises of low or moderate intensities (in the range between v_1.5 and v_2.5) and long duration (45 min) are more effective for improving muscle features associated with stamina and power in sport horses than exercises of higher intensity (equivalent to v₄) and shorter duration (25 min).     

The impact of road geometry and surface roughness on fuel consumption of logging trucks

Fuel accounts for more than 35% of transport costs in Swedish forestry, and reduced fuel consumption would provide immediate economic and environmental benefits. The objective of this study was to quantify the effect of road gradient, curvature and surface roughness on fuel consumption of a conventional 60-ton logging truck. The study used a 320-km test track on both public and forest roads. The track was driven with various load weights in both dry summer and wet autumn conditions. Fuel consumption data were retrieved from the truck's CAN-bus system, and road data were measured with a profilograph. Average fuel consumption was 71.4?litres/100?km. A regression analysis showed that the most important factor was the interaction between vehicle weight and gradient, explaining the 86% increase between empty and fully loaded truck. In addition, the regression analysis quantified the individual effects of undulation, curvature and surface roughness, explaining the 107% increase in fuel consumption between the highest and lowest road class. Results from the proposed regression model (R² of 84% for a road section length of 1000?m) were consistent with predictions given by the European ARTEMIS model, and the proposed model can be used to improve cost estimation and route selection.     

Freely dissolved PCDD/F concentrations in the Frierfjord,Norway: comparing equilibrium passive sampling with “active” water sampling

Introduction  

Equilibrium passive samplers consisting of 55-μm polyoxymethylene (POM) and 170-μm polydimethylsiloxane were tested for the analysis of polychlorinated dibenzodioxin/furan (PCDD/F) in the pore water and overlying water of the Frierfjord, a bay in southern Norway. This fjord is heavily polluted with PCDD/Fs due to emissions from a former Mg smelter.     

Unequal deployment of clones to seed orchards by considering genetic gain, relatedness and gene diversity

Related clones in seed orchards lead to inbreeding depressionand reduced genetic value of the seeds. This study aims to developthe methodology for deployment of related clones to seed orchardswhen the breeding value and the pedigree are available for eachcandidate. The following goals were considered: high geneticgain, high genetic gain adjusted for predicted inbreeding depression(net gain), high gene diversity, and high effective clone number.The selection strategies included truncation selection withor without relatedness restrictions, maximizing genetic gain(linear deployment) with or without restrictions on relatednessand maximizing net gain. The selection strategies were appliedto Norway spruce seed orchard candidates evaluated in clonaltests. The material comprised full-sib and half-sib relationships.Comparisons were made both at the same gene diversity and atthe effective clone number. Maximizing net gain by unequal rametnumber deployment resulted in considerable higher net gain anda considerable reduction of related ramets in many comparisons.Linear deployment restricted against related clones comparedat the same status number resulted in almost as high net gain.Reduction in gene diversity may be a more important reason toavoid relatives in seed orchards than the subsequent inbreedingfor achieving a high net gain.     

Development and variation of wood density, kraft pulp yield and fibre dimensions in young Norway spruce (Picea abies)

Important wood, pulp and fibre properties were investigated on small wood samples from two Rumanian, one German and one Norwegian provenance of Norway spruce (Picea abies) grown in Sørkedalen, Norway. Several samples were collected from inside each single tree, both in radial and transversal direction in the stem. Data were collected from a total of 59 trees, each 28 years of age. All investigated properties showed close relationship to ring number (RN) (cambium age). For basic density and fibre wall thickness (FWT), a fast decline was first observed when moving from pith to bark and a minimum value was found around RN 5–8. The declining trend was then followed by an increase. Kraft pulp yield, fibre length and fibre width (FW) also increased with RN, but the increase was most pronounced close to the pith. The pulp yield (PY) more or less stabilised outside of RN 5–6. FW showed a decrease outside of RN 10–12, but this was probably due to the remarkable simultaneous drop in ring width for the investigated trees. FW decreased, while basic density and fibre length increased with increasing height in the tree. PY and FWT were not affected by height in tree. Diameter at breast height (DBH) was the most important variable indicating differences between trees in the investigated material. Basic density, fibre length and FWT decreased, while FW increased with increasing DBH. Height to crown had a positive effect on basic density, but had no influence on any of the remaining properties. Differences between provenances were found for basic density, fibre length and FW. The analyses showed that it is possible to describe the variation inside and between trees satisfactorily for a range of important wood and fibre properties.     

Characterization of phenolic compounds in strawberry (Fragaria x ananassa) fruits by different HPLC detectors and contribution of individual compounds to total antioxidant capacity

Phenolic compounds in strawberry (Fragaria x ananassa) fruits were identified and characterized by using the complementary information from different high-performance liquid chromatography detectors: diode array, mass spectrometer in positive and negative mode, and coulometric array. Electrochemical profiles obtained from the coulometric array detector contributed to the structural elucidation suggested from the UV-vis and mass spectra. About 40 phenolic compounds including glycosides of quercetin, kaempferol, cyanidin, pelargonidin, and ellagic acid, together with flavanols, derivatives of p-coumaric acid, and ellagitannins, were described, providing a more complete identification of phenolic compounds in strawberry fruits. Quercetin-3-malonylhexoside and a deoxyhexoside of ellagic acid were reported for the first time. Antioxidative properties of individual components in strawberries were estimated by their electrochemical responses. Ascorbic acid was the single most important contributor to electrochemical response in strawberries (24%), whereas the ellagitannins and the anthocyanins were the groups of polyphenols with the highest contributions, 19 and 13% at 400 mV, respectively.