Permeability determination and pharmacokinetic study of nobiletin in rat plasma and brain by validated high-performance liquid chromatography method

In the present study, we are reporting permeability and pharmacokinetics of nobiletin in rat plasma and brain, using a validated reverse phase high performance liquid chromatographic method. Protein precipitation method was used for the extraction of nobiletin and coumarin (IS) from rat plasma and brain tissue. The system was run in isocratic mode with mobile phase consisting of potassium dihydrogen ortho-phosphate (pH 4.5; 0.04 mM) and acetonitrile in ratio of 50:50, v/v. The total chromatographic run time was 9.0 min. The method was proved to be accurate and precise at linearity range of 0.05–10 μg/mL with a correlation coefficient (r) of ≥ 0.994 in rat plasma and ≥ 0.995 in rat brain. The intra- and inter-day precision and accuracy values are found to be within the assay variability limits as per the FDA guidelines. Nobiletin was found stable in the battery of stability studies viz., bench-top, auto-sampler, freeze/thaw cycles and long term storage in a freezer at − 70 ± 10 °C. Maximum concentrations of nobiletin in both plasma and brain were observed at 1 h after single oral dosing (50 mg/kg). The maximum concentration in plasma and brain were 1.78 and 4.20 μg/mL, respectively. The AUC_0–t in plasma and brain were 7.49 and 20.66 μg·h/mL, respectively. The mean elimination half life (t_1/2) in plasma and brain were 1.80 and 11.42 h, respectively. The Parallel Artificial Membrane Permeability Assay (PAMPA) permeability of nobiletin was found to be high at both pH 4.0 and 7.0.     

Formulating allometric equations for estimating biomass and carbon stock in small diameter trees

Biomass and carbon sequestration rate of a young (four year old) mixed plantation of Dalbergia sissoo Roxb., Acacia catechu Willd., and Albizia lebbeck Benth. growing in Terai region (a level area of superabundant water) of central Himalaya was estimated. The plantation is seed sown in the rainy season of year 2004 and spread over an area of 44 ha. Allometric equations for both above and below ground components were developed for three tree species. The density of trees in the plantation was 1322 trees ha⁻¹ The diameters of trees were below 10 cm. Five diameter classes were defined for D. sissoo and A. catechu and 3 for A. lebbeck. 5 trees were harvested in each diameter class. Individual tree allometry was exercised for developing the allometric equations relating tree component (low and above ground) biomass to d.b.h. Post analysis equations were highly significant (P > 0.001) for each component of all species. In the plantation Holoptelia integrifolia Roxb. (Family Ulmaceae) has been reduced to shrub form because of frost. Only the aboveground biomass of H. integrifolia and other shrubs were estimated by destructive harvesting method. Herbaceous forest floor biomass and leaf litter fall were also estimated. The total forest vegetation biomass was 10.86 Mg ha⁻¹ in 2008 which increased to 19.49 Mg ha⁻¹ in 2009. The forest is sequestering carbon at the rate of 4.32 Mg ha⁻¹ yr⁻¹.     

Effects of gibberellin A<Subscript>4/7</Subscript>, 6-benzylaminopurine and chlormequat chloride on the number of male and female strobili and immature cones in Chinese pine (<Emphasis Type="Italic">Pinus tabuliformis</Emphasis>) with foliar sprays

Three kinds of plant growth regulators, gibberellinA 4/7 (GA 4/7 ), 6-benzylaminopurine (BA), and chlormequat chloride (CCC), were evaluated for their ability to promote strobilus and cone production in a Chinese pine (Pinus tabuliformis Carr.) clonal seed orchard. Treatments (0, 250, 500, or 1000 mg L -1 ) were applied during three periods (June- July, July-August and August-September) in 2005. Of the three plant growth regulators, GA 4/7 was the best for promoting flower and cone production. Trees sprayed...     

Cloning of vacuolar H<Superscript>+</Superscript>-ATPase subunit c genes from Japanese iris,and functional characterization in yeast

Five different isoforms (IrlVHA-c1-c5) of V-ATPase subunit c (VHA-c) were cloned from a Japanese iris (Iris lactea Pall. var. chinensis Fisch. Koidz) cDNA library using degenerate primers PCR and the 5'-RACE technique. The sequence analysis showed the open reading frame (ORF) of the IrlVHA-c1 c5 to be 495 bp, corresponding to a protein of 164 amino acids. Among the five isoforms, IrlVHA-c1 and IrlVHA-c2 are completely homologous. The IrlVHA-c protein is localized at the vacuolar membrane as indicated by a g...     

Effects of silviculture treatments in a hurricane-damaged forest on carbon storage and emissions in central Hokkaido,Japan

Hurricanes cause abrupt carbon reduction in forests, but silviculture treatment can be an effective means of quickly regenerating and restoring hurricane-damaged sites. This study assessed how silviculture treatments affect carbon balance after hurricane damage in central Hokkaido, Japan. We examined carbon storage in trees and underground vegetation as well as carbon emissions from silviculture operations in 25-year-old stands, where scarification and plantation occurred just after hurricane damage. The amount of carbon stored varied according to silviculture treatment. Among three scarification treatments, a scarified depth of 0 cm (understory vegetation removal) led to the largest amount of carbon stored (64.7 t·ha-1 C). Among four plantation treatments, the largest amount of carbon was stored in a Larix hybrid (L. gmelinii var. japonica × L. kaempferi) plantation (80.3 t·ha-1 C). The plantation of Abies sachalinensis was not successful at accumulating carbon (40.5·ha-1 C). The amount of carbon emitted from silviculture operations was 0.05-0.14 t·ha-1 C, and it marginally affected the net carbon balance of the silviculture project. Results indicate that silviculture treatments should beperformed in an appropriate way to effectively recover the ability of carbon sequestration in hurricane-damaged forests.     

Durability characteristics of cement-bonded particleboards manufactured from maize stalk residue

Cement-bonded particleboards of 6 mm in thickness were manufactured using maize stalk (Zea mays) particles of uniform sizes at three levels of board density and additive concentrations respectively. The bending strength and dimensional properties were assessed. Increase in board density and additive concentration caused increase in Modulus of rupture (MOR), Modulus of elasticity (MOE), and decrease in Thickness swelling (TS) and Water absorption (WA). The MOR, MOE and TS of the boards were significantly affected by board density except for WA, but additive concentration affected all the boards’ properties examined at p ≥ 0.05. Strong and dimensional stable cement-bonded boards could be manufactured from maize stalk particles with Portland cement as the binder after hot water treatment. Although the dimensional stability and mechanical strength properties of the boards were affected by the board density and additive concentration, the study revealed that cement-bonded particleboards could be manufactured from maize stalk (Zea mays) particles. However, the increase in board density and additive concentration could cause the increase in MOR and MOE, and cause the decrease in TS and WA of boards.     

Culling phenotypically inferior trees in seed production area enhances seed and seedling quality of <Emphasis Type="Italic">Acacia auriculiformis</Emphasis>

Improvement in seed and seedling quality of Acacia auriculiformis after culling phenotypically inferior trees was studied in a 6-year old seed production area (SPA). A 5-ha plantation was identified, of which 2.3 ha was converted into SPA. The initial stocking, 1 612 trees·ha⁻¹, was thinned down to 982 trees·ha⁻¹ based on growth characteristics. The following fruiting season, seeds were collected from 10 randomly selected trees in culled and non-culled stands, and seed physical characters, germination and seedling traits were assessed. Seed weight, seed thickness and percentage germination increased by 32.1%, 4.43% and 22.37%, respectively in the culled stand compared to the non-culled stand. Culling also increased the speed of germination, seedling dry weight and seedling vigor index. Heritability values were high for seed weight (0.974) and seed thickness (0.948) while medium values were observed for percentage germination (0.577) and total dry weight (0.534). Predicted genetic gain was 11.13% and 11.22% for seed weight and percentage germination, respectively. The actual gain was 32.1, 51.9 and 22.9% for seed weight, percentage germination and total dry matter, respectively. In conclusion, SPAs established by culling inferior trees could serve as sources of good quality seeds for reforestation programs until genetically improved seeds are made available.     

Variability and divergence in <Emphasis Type="Italic">Pongamia pinnata</Emphasis> for further use in tree improvement

A total of 24 candidate plus trees (CPTs) of Pongamia pinnata (L.) Pierre. were selected to elucidate their variation and diversity based on thirteen quantitative traits (4 pod traits, 6 seed traits of parent trees and 3 progeny traits) at Forest Research Centre, Institute of Forest Productivity — Mandar, Ranchi district during 2005–2007. The results show that, CPT-19 had maximum for seven traits viz, pod length (65.6 mm), 100-pod weight (542.4 g), seed 2D (two dimension) area (351.2 mm²), seed length (27.9 mm), seed breadth (17.4 mm), 100-seed weight (217.9 g) and plant height (164.3 cm). The traits, 100-pod weight and 100-seed weight had a high heritability (98.4%, 96.9%) accompanied with high genetic advance (46.0%, 34.9%). There is a positive significant correlation between 100-pod weight and 100-seed weight traits at both genotypic and phenotypic levels with plant height, collar diameter and volume index at 30 MAS (months after sowing). Volume index expressed a moderate heritability (47.4%) accompanied with high genetic advance (48.4%), indicating that the character is governed by additive gene effects. In divergence study, 24 accessions were grouped into 6 clusters on the basis of non-hierarchical euclidian cluster analysis. The genotypes in cluster IV (CPT-5, CPT-6, CPT-7, CPT-12, CPT-16, CPT-18, CPT-22) and cluster III (CPT-4, CPT-8, CPT-9, CPT-20, CPT-21) were most heterogeneous and can be best used within group hybridization. The wide diversity exists between the cluster V and II, followed by cluster II and I and crosses between CPTs of these clusters may result in substantial segregates. It is revealed that the existence of substantial variation and diversity can be utilized for genetic resource conservation and further tree improvement programmers of the species.     

Species diversity and stability of natural secondary communities with different cutting intensities after ten years

Species diversity and stability of natural secondary communities in different layers with different cutting intensities 10 years later were investigated by calculating Marglef Richness index (R), Shannon-Wiener diversity index (H), Simpson diversity index (P), and Pielou Evenness index (J). Results show that the values of R, H and P among different layers are listed in a decreasing order: the shrub layer > the arbor layer > the herb layer, all the three indices values reach the maximum under medium selective cutting intensity after 10 years. The J value of the shrub layer shows a concave parabolic change with the increase in cutting intensity; it shows a linear increase for the arbor layer, whereas the J value of the herb layer shows an opposite change pattern. The values of R at different cutting intensities had high significant difference, but other indices had not significant difference. The stability of communities at different cutting intensities after 10 years is non-cutting> low selective cutting intensity > medium selective cutting intensity > high selective cutting intensity > extra-high intensity > clear cutting. The stability of communities at different cutting intensities after 10 years shows that the greater cutting intensities, the worse the stability is.