Comparative analysis of mechanical properties of size film. I. Performance of individual size materials

Starch has been the most popular and economic size material. Synthetic binders have also been developed to be used as size material to improve weaving loom efficiency. Some synthetic size materials have got restrictions in use mainly because of ecological reasons. In the recent years, many modifications have come up in the starch as a sizing agent. Different modification can give different properties, which can be suited for a particular application. In the present study, for comparative analysis of different varieties of natural starch, modified starch and synthetic size material have been evaluated and mechanical properties like cohesion power, adhesion power, abrasion resistance, bending rigidity etc. were studied. PVA shows best properties among all size material. Among modified starch, starch ester shows better properties.     

Antibacterial Activity of 2-(2′,4′-Dibromophenoxy)-4,6-dibromophenol from Dysidea granulosa

2-(2′,4′-Dibromophenoxy)-4,6-dibromophenol isolated from the marine sponge Dysidea granulosa (Bergquist) collected off the coast of Lakshadweep islands, Indian Ocean, exhibited potent and broad spectrum in-vitro antibacterial activity, especially against methicillin resistant Staphylococcus aureus (MRSA), methicillin sensitive Staphylococcus aureus (MSSA), vancomycin resistant Enterococci (VRE), vancomycin sensitive Enterococci (VSE) and Bacillus spp. Minimal inhibitory concentration (MIC) was evaluated against 57 clinical and standard strains of Gram positive and Gram negative bacteria. The observed MIC range was 0.117–2.5 μg/mL against all the Gram positive bacteria and 0.5–2 μg/mL against Gram negative bacteria. The in-vitro antibacterial activity observed was better than that of the standard antibiotic linezolid, a marketed anti-MRSA drug. The results establish 2-(2′,4′-dibromophenoxy)-4,6-dibromophenol, as a potential lead molecule for anti-MRSA and anti-VRE drug development.     

The extent of genetic diversity among Vanilla species: Comparative results for RAPD and ISSR

Vanilla is a large genus of about 110 species in the orchid family (Orchidaceae), including the species Vanilla planifolia from which commercial vanilla flavoring is derived. Since most species of vanilla are considered rare and endangered there is an urgent need to conserve them through genetic analysis and propagation/conservation studies on this crop.The present study investigated the genetic diversity among nine leafy- and leaf-less Vanilla species employing 30 decamer RAPD primers and 10 ISSR primers. The species under study were diverse and displayed a range of variability (0–66% and 0–81% for RAPD and ISSR, respectively). A total of 154 RAPD polymorphic markers (83.24%, h = 0.378) and 93 ISSR polymorphic markers (86.11%, h = 0.363) were used to generate a genetic similarity matrix followed by the cluster analysis. Specific groupings were revealed by each cluster analysis with slight variation between two different markers. Among the nine species studied, V. planifolia, Vanilla aphylla and Vanilla tahitensis revealed very low level of variation within their collections, thus indicating a narrow genetic base. The large genetic distance of Vanilla andamanica from other species suggests its different origin. A close genetic affinity was observed between the pairs V. planifolia, V. tahitensis and Vanilla albida, V. aphylla. These are the first comparative results for RAPD and ISSR reporting inter-relationship among nine cultivated, wild and hybrid Vanilla species.     

Mechanical,thermal and interfacial properties of green composites from basalt and hybrid woven fabrics

Composites based on pure Basalt and Basalt/Jute fabrics were fabricated. The mechanical properties of the composites such as flexural modulus, tensile modulus and impact strength were measured depending upon weave, fiber contents and resin. Dynamic mechanical analysis of all composites were done. From the results it is found that pure basalt fiber combination maintains higher values in all mechanical tests. Thermo-gravimetric (TG/DTG) composites showed that thermal degradation temperatures of composites shifted to higher temperature regions compared to pure jute fabrics. Addition of basalt fiber improved the thermal stability of the composite considerably. Scanning electron microscopic images of tensile fractured composite samples illustrated that better fiber-matrix interfacial interaction occurred in hybrid composites. The thermal conductivity of composites are also investigated and thermal model is used to check their correlation.     

Influence of noncellulosic contents on nano scale refinement of waste jute fibers for reinforcement in polylactic acid films

In the present study, nanofibrils of cellulose are extracted from waste jute fibers using high energy planetary ball milling process in wet condition. The rate of refinement of untreated fibers having non-cellulosic contents was found slower than treated fibers due to strong holding of fiber bundles by non-cellulosic contents. At the end of three hours of wet milling, untreated fibers were refined to the size of 850 nm and treated fibers were refined to the size of 443 nm. In the subsequent stage, composite films of poly lactic acid (PLA) were prepared by solvent casting with 3 wt% loading of untreated jute nanofibrils, treated jute nanofibrils and microcrystalline cellulose. The influence of non-cellulosic contents on mechanical properties of PLA films are investigated based on results of tensile test, dynamic mechanical analysis and differential scanning calorimetry. The maximum improvement was observed in case of treated jute nanofibril/PLA composite film where initial modulus and tensile strength increased by 207.69 % and 168.67 %, respectively as compared to neat PLA film. These improvements are attributed to the increased interaction of treated jute nanofibrils with PLA matrix due to their higher precentage of cellulosic contents and mechanically activated surface.     

Surface modification of polymer optical fibers for enhanced side emission behavior

The polymer optical fiber with trade name Flexi was used in this research, because of its flexibility and the range of diameters available in the market. These fibers were dyed using commercial disperse dye under various conditions of dye concentration and dyeing time. Samples were analyzed for side emission of light with the use of an instrument which was specifically designed for the measurement of this nature. The results showed that the dye penetration is dependent on time, if dye concentration and temperature are kept constant. After 40 min of dyeing, the fiber core showed an increase in side emission with lower loss due to attenuation. Excessive time in the hot conditions also degraded the fiber, so that the fiber became very stiff and brittle. Fibers were also subjected to heat, in the form of boiling water bath, for selected periods of time, and it was found that the effect was similar to that of the prior experiments. Surface treatment of Flexi fibers was carried out using ethyl acetate as an etching agent, to possibly accept more disperse dye on the fiber surface. The results after dyeing showed a more significant improvement in both side emission and attenuation of light.     

Expression and localization of angiopoietin family in corpus luteum during different stages of oestrous cycle and modulatory role of angiopoietins on steroidogenesis,angiogenesis and survivability of cultured buffalo luteal cells

The objective of this study was to document the expression and localization of angiopoietin (ANGPT) family members comprising of angiopoietin (ANGPT1 and ANGPT2), and their receptors (Tie1 and Tie2) in buffalo corpus luteum (CL) obtained from different stages of the oestrous cycle, and the modulatory role of ANGPT1 and ANGPT2 alone or in combinations on progesterone (P₄) secretion and mRNA expression of phosphotidylinositide‐3kinase‐protein kinase B (PI3K‐AKT), phosphoinositide‐dependent kinase (PDK), protein kinase B (AKT), Bcl2 associated death promoter (BAD), caspase 3 and von willebrand factor (vWF) in luteal cells obtained from midluteal phase (MLP) of oestrous cycle in buffalo. Real‐time RT‐PCR (qPCR), Western blot and immunohistochemistry were applied to investigate mRNA expression, protein expression and localization of examined factors whereas, the P₄ secretion was assessed by RIA. The mRNA and protein expression of ANGPT1 and Tie2 was maximum (p < .05) in mid luteal phase (MLP) of oestrous cycle. The ANGPT2 mRNA and protein expression was maximum (p < .05) in early luteal phase, decreased in MLP and again increased in late luteal phase of oestrous cycle. ANGPT family members were localized in luteal cells and endothelial cells with a stage specific immunoreactivity. P₄ secretion was highest (p < .05) with 100 ng/ml at 72 hr when luteal cells were treated with either protein alone. The mRNA expression of PDK, AKT and vWF was highest (p < .05) and BAD along with caspase 3 were lowest (p < .05) at 100 ng/ml at 72 hr of incubation period, when cultured luteal cells were treated with either protein alone or in combination. To conclude, our study explores the steroidogenic potential of angiopoietins to promote P₄ secretion, luteal cell survival and angiogenesis through an autocrine and paracrine actions in buffalo CL.     

Response of Chickens to Infection with Newcastle Disease Virus Isolated from a Guinea Fowl

An isolate of Newcastle disease virus obtained from a guinea fowl was characterized as a viscerotropic velogenic strain based upon pathogenicity index studies. Following inoculation of the viral isolate oronasally into 3-week-old chickens, clinical signs appeared after an incubation period of 4–5 days and included dullness, depression, dyspnoea, diarrhoea and leg paralysis. The virus caused a mortality of 56% with haemorrhages at the tip of the glands of the proventriculus and caecal tonsil. Histopathological changes were prominent in the lymphoid organs, being characterized by depletion, degeneration and necrosis of the lymphoid tissues. The brain was the first organ affected, with changes being noticed 3 days after infection. Isolation of virus from various organs was more frequent from 5 to 10 days after infection, but the virus persisted in some of the organs until 21 days after infection. In spite of the high mortality, a good immune response was elicited by the isolate, as was evident from the antibody titre.