Radial stem growth in response to microclimate and soil moisture in a drought-prone mixed coniferous forest at an inner Alpine site

Dendroclimatological studies in a dry inner Alpine environment (750 m a.s.l.) revealed different growth response of co-occurring coniferous species to climate, which is assumed to be caused by a temporal shift in wood formation among species. The main focus of this study therefore was to monitor intra-annual dynamics of radial increment growth of mature deciduous and evergreen coniferous species (Pinus sylvestris, Larix decidua and Picea abies) during two consecutive years with contrasting climatic conditions. Radial stem growth was continuously followed by band dendrometers and modelled using Gompertz functions to determine time of maximum growth. Histological analyses of tree ring formation allowed determination of temporal dynamics of cambial activity and xylem cell development. Daily fluctuations in stem radius and radial stem increments were extracted from dendrometer traces, and correlations with environmental variables were performed. While a shift in temporal dynamics of radial growth onset and cessation was detected among co-occurring species, intra-annual radial growth peaked synchronously in late May 2011 and early June 2012. Moist atmospheric conditions, i.e. high relative air humidity, low vapour pressure deficit and low air temperature during the main growing period, favoured radial stem increment of all species. Soil water content and soil temperature were not significantly related to radial growth. Although a temporal shift in onset and cessation of wood formation was detected among species, synchronous culmination of radial growth indicates homogenous exogenous and/or endogenous control. The close coupling of radial growth to atmospheric conditions points to the importance of stem water status for intra-annual growth of drought-prone conifers.     

Yield decrease in sugar beet caused by reduced tillage and direct drilling

In a long-term series of on-farm tillage trials (10 loessial sites in southern and eastern Germany; annual mouldboard ploughing 0.25–0.3 m deep, mulching with a rigid-tine cultivator 0.1–0.15 m deep, direct drilling with no tillage except seedbed preparation for sugar beet solely) sugar beet yield was significantly decreased by direct drilling compared to ploughing. This study was conducted to (i) show that the lower plant density caused by mulching and direct drilling contributes to yield decrease but explains effects just partially, and (ii) determine the relation between soil structural properties and sugar beet yield. In 2003–2005 plant density experiments (53,000, 65,000 and 82,000 plants ha^?1) were introduced to tillage plots on five selected environments. Yield and soil structural properties of four layers representing 0–0.43 m soil depth were determined.White sugar yield (WSY) significantly declined with direct drilling compared to ploughing treatment, whereas mulching treatment diminished WSY less pronounced. Moreover, decreasing plant density significantly lowered WSY. No interactions between tillage and plant density occurred, revealing that both factors additively affected WSY.Decreasing tillage depth increased penetration resistance (PR) and dry bulk density (DBD), and diminished air filled pore volume (AFPV) in the topsoil down to 0.27 m depth. Several soil structural parameters were closely correlated with each other as well as WSY. Variation of single parameters explained up to 60% of WSY variance attributed to tillage. Combining DBD from 0.03 to 0.07 m depth, average PR from 0.03 to 0.27 m and AFPV from 0.03 to 0.18 m soil depth explained 77% of the tillage effect. Nevertheless, multi-collinearity of soil physical parameters allowed no clear conclusions on the cause-and-effect mechanisms.Conclusively, lowered plant density and soil structure degradation due to reduced tillage may independently decrease sugar beet yield. When grown on loessial soils this crop requires mechanical loosening down to 0.15–0.20 m depth to produce high yields.     

Structural and physiological changes associated with the skin spot disorder in apple

Skin spot is an important physiological disorder of ‘Elstar’ apples (Malus × domestica Borkh.) that occurs after fruit have been removed from controlled atmosphere storage. Skin spots are irregular patches of small, round, brown blemishes. Cross-sections reveal a browning of protoplasts (coagulated) and of cell walls that extends into the hypodermis. Skin spots are always associated with linear, gaping and non-gaping microcracks in the cuticle. Staining of apple skin with calcofluor white usually results in white fluorescence of cell walls but, within a skin spot, the white fluorescence is weak or absent. Cell walls within, and in the immediate vicinity of skin spots stain with phloroglucin/HCl indicating the presence of lignin. The area of skin affected by skin spots was positively and linearly correlated with the area of the non-blush fruit surface infiltrated by acridine orange. In general, skin spots were limited to the non-blush fruit surface and occurred more frequently near the stem-end than the calyx region of the fruit. Skin spot areas were correlated with a 2.5-fold increase in water vapour permeability compared with unaffected areas (23.8 ± 4.0 m s⁻¹ with skin spots, 9.6 ± 2.1 × 10⁻⁵ m s⁻¹ without skin spots). Strips of the fruit skin from regions with skin spots had an increased maximum force and modulus of elasticity. Dipping fruit in ascorbic acid (0.1 or 0.3 mM for 10 min) before storage decreased the area affected by skin spots. There was no effect of dipping in ethanol/water (70%, v/v, 15 min) or in solutions of captan (1.5 g L⁻¹, 10 min) or trifloxystrobin (0.1 g L⁻¹, 10 min). In contrast, prestorage treatment with 1-methylcyclopropene (630 nL L⁻¹ for 24 h) or poststorage incubation in H₂O₂ (10% for 2, 6, 10 and 16 h) increased skin spots. Our data are consistent with a typical cell response to an oxidative burst that seems to be focussed on particular regions of the ‘Elstar’ fruit surface by concentrations of cuticular microcracks, and that is possibly caused by reoxygenation injury upon removal from CA storage.     

Yield and quality of pectins extractable from the peels of thai mango cultivars depending on fruit ripeness

Pectins, recovered from the peels of four mango ( Mangifera indica L.) cultivars by mimicking industrial techniques, were evaluated in terms of yield, composition, macromolecular properties, and technofunctional quality. Freeze-dried peels of mature-green fruits, after major mesocarp softening, and at full ripeness were extracted using hot acid. The pectins were precipitated in propan-2-ol and their crude yields quantified as alcohol-insoluble substance. Like apple pomace, the dried peels provided hardly acetylated (DAc < 6.3%) rapid-set to ultrarapid-set high-methoxyl pectins at starch-adjusted yields of 11-21 g/100 g. However, despite similar high molecular weight fractions and galacturonic acid/rhamnose ratios, their average molecular weight was markedly reduced by a characteristic, almost monodisperse fraction of 16000-19000. Expanded galactans, indicated by galactose/rhamnose ratios of 15-24 mol/mol, probably represented arabinogalactan side-chain fragments withstanding hot-acid extraction at pH 1.5 and 2.0, as implied by arabinose/galactose ratios of 8-15 and 33-56 mol/100 mol, respectively. Limited galacturonic acid contents made the mango peel pectins less valuable than commercial apple pectins with regard to gelling capacity and thickening properties. Whereas starch and matrix glycan fragments almost completely degraded during ripening, depolymerization of pectins and galactans was insignificant. Technofunctional properties, modulated by extraction at different pH values, were ascribed to structural differences influencing macromolecular entanglements.     

Analysis of ammonia losses after field application of biogas slurries by an empirical model

Due to energy crises and stricter environmental regulations, renewable energy sources like bio‐methane produced by anaerobic digestion (biogas) become increasingly important. However, the application of slurries produced by biogas fermentation to agricultural land and subsequent ammonia emission may also create environmental risks to the atmosphere and to N‐limited ecosystems. Evaluating ammonia loss from agricultural land by model simulation is an important tool of agricultural‐systems analysis. The objective of this study was the systematical comparison of ammonia volatilization after application of two types of biogas slurries containing high amounts of energy crops in comparison with conventional animal slurries and to investigate the relative importance of factors affecting the emission process through an empirical model. A high number of ammonia‐loss field measurements were carried out in the years 2007/08 in biogas cropping systems in N Germany. The study consisted of simultaneous measurement of NH₃ losses from animal and biogas slurries in multiple‐plot field experiments with different N‐fertilization levels. The derived empirical model for the calculation of NH₃ losses based on explanatory variables gave good predictions of ammonia emission for both biogas and pig slurries. The root mean square error (RMSE) and mean bias error (MBE) of the empirical model for validation data were 2.19 kg N ha^–1 (rRMSE 29%) and –1.19 kg N ha^–1, respectively. Biogas slurries produced highest NH₃ emissions compared to the two animal slurries. In view of the explanatory variables included in the model, total NH$ _4^+ $ application rate, slurry type, temperature, precipitation, crop type, and leaf‐area index were important for ammonia‐volatilization losses.     

Alternate partial root-zone irrigation improves fertilizer-N use efficiency in tomatoes

The objective of this study was to investigate the comparative effects of alternative partial root-zone irrigation (PRI) and deficit irrigation (DI) on fertilizer-N use efficiency in tomato plants under mineral N and organic N fertilizations. The plants were grown in split-root pots in a climate-controlled glasshouse and were subjected to PRI and DI treatments during early fruiting stage. When analyzed across the N fertilizer treatments, PRI treatment led to significantly higher N yield, agronomic N use efficiency (ANUE), and apparent N recovery efficiency (ANRE) as compared with the DI treatment, indicating significantly higher fertilizer-N use efficiency and soil N availability as well as enhanced plant’s N acquisition ability in the PRI treatment. Analysis across the irrigation treatments showed that the mineral N fertilizer treatment (MinN) significantly increased N yield, ANUE and ANRE relative to the organic N fertilizer treatment (OrgN). Compared with DI, the rhizosphere and bulk soil mineral N content in the soil were significantly lowered in the PRI treatment, indicating the enhanced root N uptake efficiency. It is suggested that PRI-enhanced soil water dynamics may have increased soil nitrate mass/diffusive flow to the root surfaces and root N uptake efficiency in the wetting soil and stimulated soil N mineralization and plant N demand, contributing to the improved fertilizer-N use efficiency in the PRI relative to the DI treatment.     

Phosphorus and iron erosion from non-vegetated sites in a post-mining landscape,Lusatia, Germany: Impact on aborning mining lakes

Particulate phosphorus (P) can be transported via soil erosion in overland flow to waters, where it provides a long-term source of P for aquatic biota, and can accelerate freshwater eutrophication. Hence, knowledge of P sources is important for good environmental management. However, data on P, and related Fe, losses from various structures of a post-mining landscape are lacking. A year-long monitoring, and ten short rainfall simulations on plot scale, at ridges and rills and a combination of them, revealed high erosion from bare lignite mining dumps at Schlabendorf-North, Lusatia, Germany. The mean annual soil erosion rate from the year-long monitoring site was 18 × 10⁶ kg km^− 2 yr^− 1, corresponding to 0.034 g m^− 2 min^− 1. The erosion rates were lowest at rill plots (1.9–4.4 g m^− 2 min^− 1), intermediate at ridge plots (14.3–37.1 g m^− 2 min^− 1), and highest at a combined rill and ridge plot (48.7–63.4 g m^− 2 min^− 1). These differences in extent were due to small scale differences in morphology and extreme water repellency. The hydrophobicity leads to very low infiltration, thus generating surface runoff even at low rainfall intensities. Loss rates of P and Fe, as deduced from the year-long erosion rate, were 470–650 kg km^− 2 yr^− 1, and 37.9 × 10³–71 × 10³ kg km^− 2 yr^− 1 respectively. However, these P inputs from lignite mining dump erosion, consisting of P-poor (17–90 μg g^− 1) tertiary spoil materials, into aborning mining lakes, are negligible since they are accompanied by high Fe inputs, which favour an efficient P co-precipitation in the water column.     

Ribosomal RNA phylogeny of bacterial and fungal pathogens of Agriotes wireworms

Wireworms, the polyphagous larvae of click beetles belonging to the genus Agriotes (Coleoptera: Elateridae), are severe and widespread agricultural pests affecting numerous crops. Biological control agents and methods for this general pest are highly solicited. In a screening for microbial Agriotes pathogens, an intracellular bacterium and a mitosporic fungus were isolated. Phylogenetic analysis based on ribosomal RNA operon sequences of both micro-organisms corroborated their previous morphology-based taxonomic classification. The bacterial pathogen has been assigned to the taxonomic genus Rickettsiella (Gammaproteobacteria) wherein it represents a new pathotype, ‘Rickettsiella agriotidis’, that appears most closely related to subjective synonyms of the nomenclatural type species, Rickettsiella popillae. The fungal pathogen has been shown to belong to the form-species Beauveria bassiana, i.e., an obligate anamorph related to the genus Cordyceps (Ascomycota: Hypocreales). Furthermore, the B. bassiana strain from Agriotes has been shown to be potentially susceptible to identification by gIi-diagnosis, i.e., a diagnostic method making use of the strain-specific presence of self-splicing group-I introns within the ribosomal RNA operons of certain hyphomycetous fungi.     

Income Options for the Poorest of the Poor: The Case of Cardamom in Northern Laos

This study examines the potential of cardamom for poverty alleviation and sustainable rural development under conditions of increased resource scarcity in the uplands of northern Laos. Drawing on both qualitative and quantitative fieldwork in Luang Namtha province, the supply chain of cardamom is identified and the socio-economic opportunities for collectors and growers are examined. Rising demand in neighbouring countries, particularly China, provide sound income opportunities for all actors in the cardamom supply chain. Growing improved varieties has become a boon for farmers endowed with relatively large land areas with suitable agro-ecological conditions. However, land-poor and landless collectors of wild cardamom are facing increasing difficulties due to overharvesting, lower prices offered by middlemen, and the rapid conversion of remaining forests into monoculture plantations, especially rubber, which has reduced the natural habitat of cardamom and other non-timber forest products. The major policy implication is that protecting the remaining natural and secondary forests—for instance through making use of evolving international support mechanisms for community-based forest protection, including REDD-plus—will not only be of benefit for biodiversity conservation and climate change mitigation, but would also enhance the livelihoods of the poorest groups in the uplands of northern Laos.