Heat,wheat and CO2: The relevance of timing and the mode of temperature stress on biomass and yield

Atmospheric CO₂ enrichment affects C3 crops both directly via increased carbon gain and improved water use efficiency and indirectly via higher temperatures and more frequent climatic extremes. Here we investigated the response of spring wheat (Triticum aestivum L. cv. Triso) to CO₂ enrichment (550 vs. 380 µmol/mol) and heat, applied as a constant +4°C increase or a typical heat wave either before or after anthesis, or as two typical heat waves before and after anthesis. We applied a climate chamber approach closely mimicking ambient conditions. CO₂ enrichment increased above‐ground biomass and yield by c. 7 and 10%, but was not able to compensate for adverse heat stress effects, neither before nor after anthesis, with few exceptions only. Yield depression due to heat stress was most severe when two heat waves were applied (?19%). This adverse effect was, however, compensated by CO₂ enrichment. Applying heat stress before or after anthesis did not exert different effects on yield for both +4°C warming and heat wave application. However, +4°C depressed yield more than a heat wave at ambient CO₂, but not so at elevated CO₂. Thus, the interactive effects were complex and prediction of future wheat yield under CO₂ enrichment and climate extremes deserves more attention.     

Alternate partial root-zone irrigation improves fertilizer-N use efficiency in tomatoes

The objective of this study was to investigate the comparative effects of alternative partial root-zone irrigation (PRI) and deficit irrigation (DI) on fertilizer-N use efficiency in tomato plants under mineral N and organic N fertilizations. The plants were grown in split-root pots in a climate-controlled glasshouse and were subjected to PRI and DI treatments during early fruiting stage. When analyzed across the N fertilizer treatments, PRI treatment led to significantly higher N yield, agronomic N use efficiency (ANUE), and apparent N recovery efficiency (ANRE) as compared with the DI treatment, indicating significantly higher fertilizer-N use efficiency and soil N availability as well as enhanced plant’s N acquisition ability in the PRI treatment. Analysis across the irrigation treatments showed that the mineral N fertilizer treatment (MinN) significantly increased N yield, ANUE and ANRE relative to the organic N fertilizer treatment (OrgN). Compared with DI, the rhizosphere and bulk soil mineral N content in the soil were significantly lowered in the PRI treatment, indicating the enhanced root N uptake efficiency. It is suggested that PRI-enhanced soil water dynamics may have increased soil nitrate mass/diffusive flow to the root surfaces and root N uptake efficiency in the wetting soil and stimulated soil N mineralization and plant N demand, contributing to the improved fertilizer-N use efficiency in the PRI relative to the DI treatment.     

Phosphorus and iron erosion from non-vegetated sites in a post-mining landscape,Lusatia, Germany: Impact on aborning mining lakes

Particulate phosphorus (P) can be transported via soil erosion in overland flow to waters, where it provides a long-term source of P for aquatic biota, and can accelerate freshwater eutrophication. Hence, knowledge of P sources is important for good environmental management. However, data on P, and related Fe, losses from various structures of a post-mining landscape are lacking. A year-long monitoring, and ten short rainfall simulations on plot scale, at ridges and rills and a combination of them, revealed high erosion from bare lignite mining dumps at Schlabendorf-North, Lusatia, Germany. The mean annual soil erosion rate from the year-long monitoring site was 18 × 10⁶ kg km^− 2 yr^− 1, corresponding to 0.034 g m^− 2 min^− 1. The erosion rates were lowest at rill plots (1.9–4.4 g m^− 2 min^− 1), intermediate at ridge plots (14.3–37.1 g m^− 2 min^− 1), and highest at a combined rill and ridge plot (48.7–63.4 g m^− 2 min^− 1). These differences in extent were due to small scale differences in morphology and extreme water repellency. The hydrophobicity leads to very low infiltration, thus generating surface runoff even at low rainfall intensities. Loss rates of P and Fe, as deduced from the year-long erosion rate, were 470–650 kg km^− 2 yr^− 1, and 37.9 × 10³–71 × 10³ kg km^− 2 yr^− 1 respectively. However, these P inputs from lignite mining dump erosion, consisting of P-poor (17–90 μg g^− 1) tertiary spoil materials, into aborning mining lakes, are negligible since they are accompanied by high Fe inputs, which favour an efficient P co-precipitation in the water column.     

Structural and physiological changes associated with the skin spot disorder in apple

Skin spot is an important physiological disorder of ‘Elstar’ apples (Malus × domestica Borkh.) that occurs after fruit have been removed from controlled atmosphere storage. Skin spots are irregular patches of small, round, brown blemishes. Cross-sections reveal a browning of protoplasts (coagulated) and of cell walls that extends into the hypodermis. Skin spots are always associated with linear, gaping and non-gaping microcracks in the cuticle. Staining of apple skin with calcofluor white usually results in white fluorescence of cell walls but, within a skin spot, the white fluorescence is weak or absent. Cell walls within, and in the immediate vicinity of skin spots stain with phloroglucin/HCl indicating the presence of lignin. The area of skin affected by skin spots was positively and linearly correlated with the area of the non-blush fruit surface infiltrated by acridine orange. In general, skin spots were limited to the non-blush fruit surface and occurred more frequently near the stem-end than the calyx region of the fruit. Skin spot areas were correlated with a 2.5-fold increase in water vapour permeability compared with unaffected areas (23.8 ± 4.0 m s⁻¹ with skin spots, 9.6 ± 2.1 × 10⁻⁵ m s⁻¹ without skin spots). Strips of the fruit skin from regions with skin spots had an increased maximum force and modulus of elasticity. Dipping fruit in ascorbic acid (0.1 or 0.3 mM for 10 min) before storage decreased the area affected by skin spots. There was no effect of dipping in ethanol/water (70%, v/v, 15 min) or in solutions of captan (1.5 g L⁻¹, 10 min) or trifloxystrobin (0.1 g L⁻¹, 10 min). In contrast, prestorage treatment with 1-methylcyclopropene (630 nL L⁻¹ for 24 h) or poststorage incubation in H₂O₂ (10% for 2, 6, 10 and 16 h) increased skin spots. Our data are consistent with a typical cell response to an oxidative burst that seems to be focussed on particular regions of the ‘Elstar’ fruit surface by concentrations of cuticular microcracks, and that is possibly caused by reoxygenation injury upon removal from CA storage.     

Breeding for organic agriculture: the example of winter wheat in Austria

Breeding for organic agriculture (BFOA) is a strategy for a commercial breeding company based on the exploitation of the frequently observed high correlation for many traits between conventional, low input (LI) and organic agriculture (ORG). Indirect selection under LI can be useful to roughly divide the germplasm into the genotypes better adapted to high input and those better adapted to LI or ORG conditions. BFOA is an evolving process, in which two methods are currently applied: early generations are either selected following the pedigree system under LI, or grown as bulk populations on ORG fields. In the latter case the system switches to LI after individual ear selection under ORG conditions. In both methods, the first replicated yield trial is grown parallel under ORG and LI. Subsequently, the genotypes are grouped into conventional or ORG advanced trial series. The BFOA strategy allows that the larger genetic variability of both the organic and conventional gene pool can be exploited in the selection for ORG. Hitherto, seven winter wheat varieties were released in Austria after exclusive organic VCU testing.     

Effects of Aporrectodea caliginosa (Savigny) on nitrogen mobilization and decomposition of elevated‐CO2 Charlock mustard litter

This study was conducted to improve our understanding of how earthworms and microorganisms interact in the decomposition of litter of low quality (high C : N ratio) grown under elevated atmospheric [CO₂]. A microcosm approach was used to investigate the influence of endogeic earthworm (Aporrectodea caliginosa Savigny) activity on the decomposition of senescent Charlock mustard (Sinapis arvensis L.) litter produced under ambient and elevated [CO₂]. Earthworms and microorganisms were exposed to litter which had changed in quality (C : N ratio) while growing under elevated [CO₂]. After 50 d of incubation in microcosms, C mineralization (CO₂ production) in the treatment with elevated‐[CO₂] litter was significantly lower in comparison to the ambient‐[CO₂] litter treatment. The input of Charlock mustard litter into the soil generally induced N immobilization and reduced N₂O‐emission rates from soil. Earthworm activity enhanced CO₂ production, but there was no relationship to litter quality. Although earthworm biomass was not affected by the lower quality of the elevated‐[CO₂] litter, soil microbial biomass (C_mic, N_mic) was significantly decreased. Earthworms reduced C_mic and fungal biomass, the latter only in treatments without litter. Our study clearly showed that A. caliginosa used the litter grown under different [CO₂] independent of its quality and that their effect on the litter‐decomposition process was also independent of litter quality. Soil microorganisms were shown to negatively react to small changes in Charlock mustard litter quality; therefore we expect that microbially mediated C and N cycling may change under future atmospheric [CO₂].     

Simultaneous analysis of free phytosterols/phytostanols and intact phytosteryl/phytostanyl fatty acid and phenolic acid esters in cereals

An approach based on solid-phase extraction for the effective separation of free phytosterols/phytostanols and phytosteryl/phytostanyl fatty acid and phenolic acid esters from cereal lipids was developed. The ester conjugates were analyzed in their intact form by means of capillary gas chromatography. Besides free sterols and stanols, up to 33 different fatty acid and phenolic acid esters were identified in four different cereal grains via gas chromatography-mass spectrometry. The majority (52-57%) of the sterols and stanols were present as fatty acid esters. The highest levels of all three sterol and stanol classes based on dry matter of ground kernels were determined in corn, whereas the oil extract of rye was 1.7 and 1.6 times richer in fatty acid esters and free sterols/stanols than the corn oil. The results showed that there are considerable differences in the sterols/stanols and their ester profiles and contents obtained from corn compared to rye, wheat, and spelt. The proposed method is useful for the quantification of a wide range of free phytosterols/phytostanols and intact phytosteryl/phytostanyl esters to characterize different types of grain.     

Regionalization of critical loads under uncertainty

The steady-state model PROFILE was used to perform Monte Carlo simulations of critical loads of acidity and exceedances of forest soils for 128 sites in the province of Scania, southern Sweden. Statistical tests showed that 100 sites had normal distributed critical loads and exceedances and that the variance of these parameters was statistically equal for all sites. Pooled estimates of the standard deviation was 0.19 and 0.31 kmol_c ha^?1 yr^?1 for the critical loads and exceedances, respectively. Introduction of uncertainties, expressed as confidence intervals, in the cumulative distribution function for critical loads showed that overlaps between percentiles were substantial. The 5%-ile was systematically equal to the 57%-ile using a 67% confidence interval and equal to the 87%-ile when a 95% confidence level was chosen. The overlaps of percentiles cause a reduction of acidic deposition according to the mean value of the 5%-ile to protect only 68% of the ecosystem area with an 84% probability and not a guaranteed protection of 95% as if uncertainties did not exist. Thus, uncertainties make it possible to advocate reductions to levels of deposition below the 5%-tile of critical loads.