Measuring versus estimating net radiation and soil heat flux: Impact on Penman–Monteith reference ET estimates in semiarid regions

The standardized ASCE Penman–Monteith and FAO-56 equations were used to estimate reference evapotranspiration (ET₀) using estimated and measured net radiation (R_n) and soil heat flux (G), based on hourly and daily meteorological data. The estimates were evaluated against lysimeter measurements. The results indicate that using measured or estimated values of R_n and G can have significant effect on the accuracy of the ET₀ estimations, especially when calculations were made on an hourly basis. The FAO-56 version performed very well during the irrigation season on a daily basis. The use of measured R_n and G did not improve ET₀ estimation on a daily basis, therefore, the use of estimated R_n and G appears to be dependable when calculations are based on 24-h weather data. When daily ET₀ was calculated from hourly estimations, the results were different depending on the version used. The ASCE version was more accurate, especially when R_n and G were measured. Therefore, measurement of R_n and G may have potential to improve estimation only when daily ET₀ is calculated from hourly estimations. The PM FAO-56 version was always a little less accurate than the ASCE version. For hourly calculations, using a constant surface resistance (as in FAO-56 version), the PM method underpredicted for high evaporative demand and vice versa. The ASCE version performed better than PM FAO-56 version when R_n and G were measured and estimated. Therefore, ASCE version tended to provide quite accurate values of hourly ET₀, even using estimated values of R_n and G. As conclusion, the methods proposed by FAO-56 for estimating R_n and G tended to produce accurate estimates for daily and hourly ET₀ under semiarid conditions and can be used with some degree of confidence for estimating ET₀. In addition, results suggest that the ASCE standardized equation on an hourly basis improved the accuracy of ET₀ estimation with respect to the FAO-56 version.     

SIRIAS: a simulation model for sprinkler irrigation

Uniformity of distribution in irrigation systems plays an important role in the optimum use of irrigation water, with direct repercussions on water-use efficiency and production. To evaluate the effects of the wind on sprinkler water uniformity, it is necessary to measure infield water distribution under different wind conditions and then calculate the parameters that define water distribution. This paper perfects the SIRIAS simulation model for sprinkler systems, which can be used to design new irrigation installations or to improve existing ones. Using ballistic theory to simulate the trajectory of drops discharged by the sprinkler, the model obtains wind-distorted water distribution, with a new formulation for the air drag coefficient. It takes into account three options to distribute the evaporation and drift losses in the irrigation process. SIRIAS software has been programmed using Delphi language for Windows 95, 98 and NT.     

Multivariate analysis of invasive plant species distributions in southern US forests

Landscape Ecology - Invasive plants cause significant impacts in forested areas throughout the world. However, little is known about the relative importance of environmental drivers on the...     

Sediment production from unpaved roads in a sub-tropical dry setting — Southwestern Puerto Rico

The threat imposed by increased sediment loading rates ranks among the most important stressors affecting coral reef ecosystems worldwide. This study represents an effort to quantify the effects of unpaved roads on erosion rates in a dry sub-tropical area of Puerto Rico and is intended to aid in developing scientifically-based erosion mitigation strategies. Hence, the specific objectives of this study were to: (1) measure sediment production rates from unpaved roads; (2) evaluate the effect of precipitation, rainfall erosivity, slope, plot length, and vegetation cover on sediment production rates; and (3) compare measured sediment production rates to published surface erosion data from roaded and natural sites in the Eastern Caribbean. Sediment production from nine abandoned road segments with varying slopes and plot lengths were measured with sediment traps in southwestern Puerto Rico from August 2003 to September 2005.     

Flavor and quality characteristics of salted and desalted cod (Gadus morhua) produced by different salting methods

Flavor characterization and quality of salt-cured and desalted cod (Gadus morhua) products was studied using sensory analysis and gas chromatography techniques. The products were produced in Iceland using two different processing methods (filleting and splitting) and three different salting procedures, i.e., the old single-step kench salting or a multistep procedure, and presalting (injection and brine salting or only brine salting), which was followed by kench salting. The main difference observed was between fillets and split fish, where the split fish was darker and had stronger flavor characteristics. Comparison of different salting procedures showed that the use of presalting improved the appearance of the salted products, which can be described as increased lightness and reduced yellowness of the products. In the same products, the intensity of curing flavors was milder, as described by sensory analysis and key aroma compounds. Derivatives from lipid and protein degradation contribute to the characteristic flavor of the salted products.     

Atmospheric Mercury Fluxes in a Southern Boreal Forest and Wetland

Total gaseous mercury (TGM) fluxes from the forest floor and a boreal wetland were measured by a flux chamber technique coupled with an automatic mercury vapour analyser. The fluxes were measured at three sampling sites in southern Finland, 61°14′ N, 25°04′ E in summer 2007, with additionally in situ TGM concentrations in the air at one of the sites and mercury bulk deposition at another. Most of the flux data were collected during the daytime. At one of the sites, diurnal flux behaviour was studied, and a clear cycle with an afternoon maximum and a night minimum was observed. The highest emissions (up to 3.5 ng m⁻² h⁻¹) were observed at the forest floor site having a moss and grass cover. At the wetland and litter-rich forest floor sites, the emissions were below 1 ng m⁻² h⁻¹ and sometimes negative (down to −1.0 ng m⁻² h⁻¹), indicating mercury uptake. The measured average fluxes in August were 0.9 ± 1.1 and 0.2 ± 0.3 ng m⁻² h⁻¹ for the forest floor sites and wetland sites, respectively. The flux data were compared with the mercury bulk deposition, which proved to be of the same magnitude, but opposite in sign. At the mossy forest floor site, the extrapolated TGM emissions were 130% of the Hg deposition in August 2007. Comparison with other studies showed that the fluxes in background areas are relatively uniform, regardless of measurement site location and method used. Airborne TGM remained at the background level during the study, with an average value of 1.3 ± 0.2 ng m⁻³; it frequently showed a diurnal cycle pattern.     

Effects of Broomrape Parasitism on Sunflower Plants: Growth,Development, and Mineral Nutrition

Sunflower broomrape (Orobanche cumana Wallr.) is a parasitic plant that infects sunflower (Helianthus annuus L.) plants. In this work, sunflower plants were grown under greenhouse conditions in pots with the substrate infested or non-infested with broomrape seeds. At different numbers of days after sowing, plant height, internode lengths, number of leaves, head diameter, mineral composition of leaves, and potassium (K) concentration in stem were measured. The negative effects of broomrape parasitism were assessed from 57 d after sowing, when broomrape started to emerge. Parasitized plants exhibited lower shoot dry weight, height, and head diameter than control plants. The reduction in internode lengths was associated with a decrease in the gradient of K concentration from basal to apical stem. The mineral composition of leaves was also affected in parasitized plants. The concentrations of calcium (Ca), magnesium (Mg), manganese (Mn), and zinc (Zn) in leaves of parasitized plants were lower than those of the control plants, while there were few differences for K, phosphorus (P), iron (Fe), and copper (Cu). The effects of parasitism are discussed in relation to their competition for resources and to perturbations of the host physiology such as hormonal and water balance.     

MODELING GROWTH AND ION CONCENTRATION OF LILIUM IN RESPONSE TO NITROGEN:POTASSIUM:CALCIUM MIXTURE SOLUTIONS

Nutrient solution composition plays an important role in root uptake rate due to interactions among nutrients and internal regulation. Studies to determine the optimum nutrient solution concentration are focused on individual ions, ignoring the adaptation mechanisms triggered by plants when growing in a varying external nutrient concentration. The objective of the present study was to determine the response in growth and tissue ion concentration of lilium cv. ‘Navona’ to nutrient mixtures of varying proportions of nitrogen (N), potassium (K⁺), and calcium (Ca²⁺) in solution using mixture experiments methodology in order to determine the optimum concentration. Bulbs of lilium were transplanted in plastic crates and drip-irrigated with the treatment solutions, which consisted of a mixture of N, K⁺, and Ca²⁺ whose total concentration was 340 mg L^?1 and minimum concentrations of each ion was 34 mg L^?1. Chlorophyll concentration (SPAD), shoot fresh weight (FW), leaf FW, and leaf area were measured 60 days after transplanting and ion analysis was performed on shoot tissues from selected treatments. Lilium exhibited a moderate demand for N and K⁺ (136–170 mg L^?1 N and 116–136 mg L^?1 K⁺) and a very low demand for Ca²⁺ (34–88 mg · L^?1). This low demand may be due to the remobilization of the nutrients stored in the bulbs. Integrating the predictions of the models estimated to produce >90% of maximum growth, the optimum nutrient solution should contain Ca²⁺ at a concentration between 34 and 126 mg · L^?1, K⁺ between 119 and 211 mg · L^?1, and N between 92 mg · L^?1 and 211 mg · L^?1. Increasing external N concentration affected internal N concentration but not internal K⁺ or Ca²⁺ concentrations, despite that the increase in external N was associated with a decrease in external K⁺ and Ca²⁺. Similar trends were observed for external K⁺ and Ca²⁺ concentration. In conclusion, lilium was able to maintain a relatively constant K⁺ and Ca²⁺ concentration regardless of the lower concentration in the nutrient solution when N was increased (similar response was observed for K⁺ and Ca²⁺) and it has a low Ca²⁺ demand and moderate N and K⁺ supply.     

Tomato fruit quality as influenced by the interactions between agricultural techniques and harvesting period

Tomato (Solanum lycopersicum Mill) is an important crop in terms of its economic and nutritional value. Many factors, including cultivar, climate, geography, geochemistry, and agricultural practice, can affect its nutrient concentrations. An HJ‐biplot study was performed to examine the effects of cultivar (Dorothy, Boludo, Dominique, Thomas, and Dunkan), agricultural practices, climatic factors, and their interactions. Significant differences were analyzed using a one‐way ANOVA. All samples were collected and assayed at the same degree of ripeness. In the conventional and organic tomato samples, those harvested from December to April had the highest concentrations of fructose, glucose, citric acid, malic acid, ascorbic acid, protein, Na, and Mg, while those harvested in October had the highest concentrations of lycopene and hydroxycinnamic acid. There were high concentrations of Ca, P, Zn, and Cu in the no‐soil tomatoes. Conventional and organic cultivation practices showed similar results with respect to the collection period, both presenting high organic compound concentrations, while high mineral concentrations seemed to correspond to the no‐soil practice. No clear pattern was observed among the different cultivars, perhaps due to all the samples having been collected at the same degree of ripeness.     

Effect of Preharvest Sprays of Calcium on Cracking and ‘Schattenmorelle’ Sour Cherry Fruit Quality Harvested Mechanically

The aim of the study was to examine effect of preharvest sprays of calcium (Ca) in the form of Ca-chloride (CaCl₂), Ca-nitrate [Ca(NO₃)₂], or a mixture of Ca-formate, Ca-acetate, CaCl₂, and Ca(NO₃)₂ on cracking and quality of ‘Schattenmorelle’ sour cherry fruit harvested mechanically. The experiment was conducted in 2008–2009 at a commercial orchard in central Poland. Mature trees grew on a coarse-textured soil poor in organic matter, at a spacing of 4.0 × 1.5 m. The spray treatments of Ca were performed at 7-day intervals, starting 28 days before harvest, at the rates of 5.0–5.6 kg Ca ha^?1 per season. The trees sprayed with water were treated as the control. Fruit were harvested mechanically when peduncle-fruit detachment force dropped below 3 N. The results showed that preharvest Ca sprays caused no leaf damage. This measure did not affect yield, mean fruit weight, soluble solids concentration and titratable acidity of fruit, and weight loss of fruit during 24 h after harvest. Fruit sprayed with Ca had improved status of this nutrient, and were less liable to juicy leakage from the stem scar, rain-induced cracking, and preharvest decay caused by Glomerella cingulata. The above effects of Ca sprays did not depend on the tested material. It was concluded that preharvest sprays of Ca as CaCl₂ and/or Ca(NO₃)₂ should be recommended in ‘Schattenmorelle’ sour cherry orchards to reduce fruit losses resulting from rain-induced cracking, leakage of juice, and the incidence of cherry bitter rot.