Toxic Effect of Certain Metals Mixture on Some Physiological and Morphological Characteristics of Freshwater Algae

The toxic effect of multi metals mixture which exist simultaneously in aquatic ecosystem on natural phytoplankton assemblages (green algae, blue-green algae and diatoms) was studied. For this purpose a laboratory scale unit was designed to evaluate the effect of continuous flow metals mixture in forms if triple and penta metals in Nile water algae. Clear changes in algal biomass in terms of chlorophyll a (chl a) took place when subjected to metals combination. The rise or decline in chl a was in relation with other algal pigments (chl b, chl c, carotenoides and phenophytin), protein and carbohydrate content of algal cells. Substantial changes in phytoplankton community structure was detected and the most tolerant group was blue-green algae followed by green algae while diatoms was the most sensitive group. The most dominant species in all cases were blue-green alga Oscillatoria mougeotii and green alga Scenedesmus quadricauda. In addition clear changes in morphological shape was observed for tolerant species belonging to the three algal groups. Nile water algae has ability to remove and accumulate metals in the following order therefore Zn > Cd > Ni > Cu > Cr. In addition, phytoplankton has ability to recovered from the stress of metals when eliminated from the media and the recovered biomass was nearly equivalent to that before exposing to metals stress. The overall effect of metals mixture depending on the type and number of metals, the algal community structure and ratio between different morphological forms of algae (unicellular, colonial and filamentous).     

Correction to: Impact of leaf infestation by herbivorous insects on the elemental uptake of citrus trees

Journal of Plant Diseases and Protection - In the original publication, the article title was incorrectly published as ‘Impact of leave infestation by herbivorous insects on the elemental...     

Nano-calcium carbonate reinforced polypropylene and propylene-ethylene copolymer nanocomposites: Tensile vs. impact behavior

Improvement of both the tensile and impact strength of the same polymeric material has always been a great challenge for the plastic industry. The study focuses on the effect of incorporation of calcium carbonate nanoparticles (0.3 wt% to 15 wt%) into three polypropylene (PP) based matrices viz. PP homopolymer, propylene-ethylene (PP-PE) copolymer and the blend of PP:PP-PE (30:70) to improve their impact behavior without hampering the tensile strength much. A loss in both the tensile and impact properties was observed in PP based nanocomposite. However, PP-PE based nanocomposites showed a significant improvement in impact strength (47 %) at 10 wt% loading with a loss of tensile strength by 22 %. To minimize this loss a blend of PP:PP-PE (30:70) was explored as a matrix. At 10 wt% loading, this matrix showed an improvement of 30 % in impact strength whereas the tensile loss was minimized to 10 %. Further, silane coupling agent which promoted good interfacial adhesion was used for best compositions. The variation of crystalline morphology of the nanocomposites with various formulations was analyzed using differential scanning calorimetry and X-ray diffraction.     

Identification of favorable alleles in the <Emphasis Type="Italic">non</Emphasis>-<Emphasis Type="Italic">yellow coloring 1</Emphasis> gene by association mapping in maize

Association mapping was conducted to explore favorable alleles of the chlorophyll-related non-yellow coloring 1 (NYC1) gene under light and dark using an association panel of 146 maize inbred lines. A total of 14 polymorphic sites were identified to be significantly associated with at least one of the chlorophyll-related traits at the seedling stage. Four single nucleotide polymorphisms (SNPs) (S320, S2951, S3901, and S3355) from the NYC1 gene were respectively strongly associated with chlorophyll b (chlb), the ratio of chlorophyll a to chlorophyll b (chl_ratio), chlorophyll a degradation (chla_deg), and total chlorophyll degradation (total_chl_deg). SNPs S320 (C/A) in exon 1, and S2951 (A/G) in intron 8 was related to chlb, with 6.01 and 8.89% of phenotypic variation under light treatment, respectively. Under dark treatment, SNP S3901 (C/T), located in 3′ untranslated region (3′UTR), was associated with chl_ratio, explaining 7.01% of the observed phenotypic variation, whereas SNP S3355 (C/G) in intron 9 explained 6.48 and 5.18% of phenotypic variations in chla_deg and total_chl_deg, respectively. Taken together, these results indicated that the NYC1 gene plays an important role in chlorophyll content and other related traits, and different sites act on chlorophyll metabolism under different light intensities in maize seedlings. Furthermore, these findings improve our understanding of the genetic basis of chlorophyll metabolism under different light conditions.     

Association mapping reveals loci associated with multiple traits that affect grain yield and adaptation in soft winter wheat

Genome-wide association studies (GWAS) are useful to facilitate crop improvement via enhanced knowledge of marker-trait associations (MTA). A GWAS for grain yield (GY), yield components, and agronomic traits was conducted using a diverse panel of 239 soft red winter wheat (Triticum aestivum) genotypes evaluated across two growing seasons and eight site-years. Analysis of variance showed significant environment, genotype, and genotype-by-environment effects for GY and yield components. Narrow sense heritability of GY (h ²  = 0.48) was moderate compared to other traits including plant height (h ²  = 0.81) and kernel weight (h ²  = 0.77). There were 112 significant MTA (p < 0.0005) detected for eight measured traits using compressed mixed linear models and 5715 single nucleotide polymorphism markers. MTA for GY and agronomic traits coincided with previously reported QTL for winter and spring wheat. Highly significant MTA for GY showed an overall negative allelic effect for the minor allele, indicating selection against these alleles by breeders. Markers associated with multiple traits observed on chromosomes 1A, 2D, 3B, and 4B with positive minor effects serve as potential targets for marker assisted breeding to select for improvement of GY and related traits. Following marker validation, these multi-trait loci have the potential to be utilized for MAS to improve GY and adaptation of soft red winter wheat.     

Agronomic traits at the seedling stage,yield, and fiber quality in two cotton (Gossypium hirsutum L.) cultivars in response to phosphorus deficiency

ABSTRACT

Cotton is critical for phosphorus demands and very sensitive for its deficiency. However, identifying the effect of low-phosphorus tolerance on cotton growth, yield, and fiber quality by reducing phosphorus consumption. This may help to develop phosphorus-tolerant high-yielding cotton cultivars. In a two-year repeated (2015 and 2016) hydroponic experiment (using 0.01 and 1 mM KH₂PO₄), two cotton cultivars with phosphorus sensitivity (Lu 54; a low-phosphorus sensitive and Yuzaomian 9110; a low-phosphorus tolerant) were screened on the base of agronomic traits and physiological indices through correlation analysis, cluster analysis and principal component analysis from 16 cotton cultivars. Low phosphorus nutrition reduced the plant height, leaf number, leaf area, phosphorus accumulation and biomass in various organs of seedlings. The deficiency negatively affected the morphogenesis of seedlings, as well as yield and fiber quality. Further, these screened cultivars were tested in a pot experiment with 0, 50, 100, 150, 200 kg P₂O₅ ha^?1 during 2016 and 2017. It was found to have a significant (P< 0.05) difference in boll number, lint yield, fiber strength, and micronaire at the harvest. Furthermore, after collectively analyzed the characteristics of Lu 54 and Yuzaomian 9110, there were six key indices that could improve the low phosphorus tolerance of cotton cultivars. These were root phosphorus accumulation, stem phosphorus accumulation percentage, leaf and total biomass of seedlings, seed cotton weight per boll and fiber length.     

Analysis of the variations in dry matter yield and resource use efficiency of maize under different rates of nitrogen,phosphorous and water supply

Abstract

Increasing resources use efficiency in intensive cultivation systems of maize (Zea mays L.) can play an important role in increasing the production and sustainability of agricultural systems. The objectives of the present study were to evaluate DM yield and the efficiency of inputs uses under different levels of water, nitrogen (N) and phosphorus (P) in maize. Therefore, three levels of irrigation including 80 (ETc₈₀), 100 (ETc₁₀₀) and 120% (ETc₁₂₀) of crop evapotranspiration were considered as the main plots, and the factorial combination of three levels of zero (N₀), 200 (N₂₀₀) and 400 (N₄₀₀) kg N ha^?1 with three levels of zero (P₀), 100(P₁₀₀) and 200 (P₂₀₀) kg P ha^?1 was considered as the sub plots. The results showed that increasing the consumption of water and P was led to the reduction of N and P utilization efficiency, while RUE increased. WUE was also increased in response to application of N and P, but decreased when ET_C increased. DM yield under ETc₈₀ treatment reduced by 11 and 12%, respectively, compared to ETc₁₀₀ and ETc₁₂₀ which was due to reduction of cumulative absorbed radiation (R_abs(cum)) and RUE. Under these conditions, changes of stomatal conductance (gs) had little effect on DM yield. It was also found that N limitation caused 11 and 20% reduction in DM yield compared to N₂₀₀ and N₄₀₀, respectively. This yield reduction was mainly the result of decrease in RUE. By decreasing R_abs(cum), P deficiency also reduced DM yield by 5 and 9%, respectively, relative to P₁₀₀ and P₂₀₀ treatments.