Morphological acclimation to understory environments in Abies amabilis, a shade- and snow-tolerant conifer species of the Cascade Mountains, Washington, USA

Light-related plasticity in a variety of crown morphology and within-tree characteristics was examined in sun and shade saplings of Abies amabilis Dougl. ex J. Forbes growing in two late-successional forests with different snow regimes in the Cascade Mountains of Washington, USA. Compared with sun saplings, shade saplings typically had broad flat crowns as a result of acclimation at several scales (needle, shoot, branch, crown and whole sapling). Shoots of shade saplings had a smaller needle mass per unit of stem length than shoots of sun saplings, a feature that enhances light-interception efficiency by reducing among-needle shading. The low annual rate of needle production by shade saplings was associated with a longer needle lifespan and slower needle turnover. Reduced needle production within a shoot was reflected at the branch level, with lateral branches of shade saplings having a smaller needle mass than branches of the same length of sun saplings. Reduced allocation to needles permits greater investment in branches and stems, which is necessary to support the horizontally expanding branch system characteristic of shade saplings. Mean branch age of shade saplings was significantly higher than that of sun saplings. Shade saplings had lower needle mass per unit of trunk biomass or total biomass, reflecting greater investment in the trunk as a support organ. Increased investment in support organs in shade was more evident in the snowier habitat. The observed morphological acclimation makes A. amabilis highly shade and snow-tolerant and thus able to dominate in many late-successional forests in snowy coastal mountain regions.     

Importance of rubberwood in wood export of Malaysia and Thailand

We examined the contribution of rubberwood to the timber export markets of Malaysia and Thailand. In Malaysia, rubberwood has grown from 26% of total exported wood products in 1998 to 35% in 2007. A high proportion of furniture products (80%) is rubberwood, whereas the contribution of rubberwood to other wooden products is less than 20%. Only 10% of sawn timber and logs is rubberwood. In Thailand, rubberwood contributes to around 60% of total exported wood products, arising from a high share of not only furniture products (70%) but also other wood products (around 50%) and sawn timber and logs, which have increased in share from 40% in 1998 to 79% in 2007. We conclude that the high proportion of rubberwood products in the wood export markets of these two countries is a result of: (1) scarcity of raw wood materials because of strict controls on the logging of natural forests; and (2) governmental support to rubberwood production, including financial support to rubber planters and technical assistance to downstream timber processors.     

RFLPs of chloroplast and mitochondrial DNA in wild soybean, Glycine soja, growing in China

RFLPs of chloroplast (cp) and mitochondrial (mt) DNA have been used to characterize the cytoplasmic genome of wild soybean, Glycine soja, growing in China. We have found from the RFLPs of that the cytoplasmic genomes of most Chinese wild soybeans have a combination of cpIII with mt-a or a combination of cpII with mt-b accompanied by mtIV or mtV according to our classification. CpII was not observed in combination with mt-a and cpIII was not observed in combination with mt-b. The regional distribution of these two types showed clines with opposite directions. The Yangtze River Valley had the greatest diversity in each of cp and two mt profiles detected in this study and the cytoplasmic genome combining these three profiles showed the highest degree of polymorphism in this region. The Yangtze River Valley may be a center of cytoplasmic diversity of wild soybean and may contain various genetic resources of soybean.     

Performance of agency-managed and farmer-managed irrigation systems: A comparative case study at Chitwan, Nepal

Management reforms are considered one of the best alternatives in increasing efficiency of the irrigation systems. Transfer of day-to-day operation and maintenance to farmers is not a new concept. However due to lags, even now it is a hot issue in developing countries and Nepal is not an exception. In this context of growing argument about the transfer of management of public irrigation systems to the Water Users' Group, this paper examines the comparative performance of farmer-managed and agency-managed irrigation systems. Khageri Irrigation System in the Chitwan district of Nepal was taken as the study site where complete management transfer has been done in 1996. The situations before and after complete transfer were compared. Intensive case studies of the selected farmers showed that equity in distribution of water and leakage had significantly improved after management transfer. Logit analysis revealed that age and education level of the household head, distance from main canal, leakage of the canal and equity in distribution are significantly related to the satisfaction level of the beneficiary farmers from FMIS compared to AMIS. However, landholding size of the respondent farmer has no significant effect. Similarly results from t-test revealed that rice productivity and overall profits from agriculture has also increased significantly due to irrigation management transfer.     

Model-based forecasting of twig canker incidence of bacterial spot of peach in Fukushima Prefecture

Bacterial spot caused by Xanthomonas arboricola pv. pruni (Xap) is the most important disease that affects peach production. A disease-forecasting model was developed to help growers decide when to apply bactericides and remove diseased, last-year twigs. To predict the incidence of “spring cankers”, peach twigs damaged by Xap, we used 12 years (2009–2020) of data from Fukushima Prefecture to develop a forecasting system using a hierarchical Bayesian model (HBM). The model included the number of fields with a bacterial spot incidence (BSI) on leaves?≥?10% in late September of the previous season and the number of days with rain (≥?10 mm/day) and maximum wind speed (≥?5 m/s) during the previous October as predictors. Using a best-fit cutoff value based on a receiver operating characteristic (ROC) curve, the model achieved a 0.836 accuracy, 0.804 sensitivity, 0.847 specificity, 0.847 precision, and 0.712 F-measure. The model was validated using a fourfold cross-validation (CV) procedure and achieved an average accuracy of 0.847. Thus, the model explained 65.7% of the variability compared to observed frequencies with predicted probabilities of twig canker incidence (TCI)?≥?2% from April to May 2009 to 2020 in Fukushima Prefecture. These results suggest that this disease-forecasting model using HBM based on 12 years of historical data can be used to predict the risk of twig cankers of bacterial spot of peach.

     

Migration of biological control agent Rhizobium vitis strain ARK-1 in grapevine stems and inhibition of galls caused by tumorigenic strain of R. vitis

Journal of General Plant Pathology - Nonpathogenic strain ARK-1 of Rhizobium vitis has antagonistic activity against a tumorigenic (Ti) strain of R. vitis and works as a biocontrol agent, but the...     

Kinetic Parameters of Gross N Mineralization of Peat Soils as Related to the Composition of Soil Organic Matter

Peat land has been considered as an alternative type of land for agricultural development especially in the tropics. In the present study, the N-supplying capacity, one of the most important soil properties in terms of crop production, of peat soils was examined. Ten peat soil samples were collected from Indonesia, Malaysia, and Japan. Gross N mineralization in the soil samples was estimated using a zero-order model, and kinetic parameters of mineralization were determined using a simple type model. Soil organic matter composition was investigated using ¹³C CPMAS NMR. Mineralization potential ( N ₀), apparent activation energy ( E _a), and mineralization rate constant ( k ) ranged between 571–2,445 mg kg⁻¹, 281–8,181 J mol⁻¹, and 0.009–0.020 d⁻¹, respectively. Although none of the parameters showed a significant correlation with the soil C/N ratio, a negative correlation was observed between the k value and the ratio of the proportion of alkyl C in total C to that of O -alkyl C estimated by ¹³C CPMAS NMR. The latter suggested that the k values were higher in the peat soils relatively rich in readily decomposable organic matter including carbohydrates.     

Evaluation of genetic diversity of bread wheat landraces from Pakistan by AFLP and implications for a future collection strategy

We used amplified-fragment-length polymorphism (AFLP) markers to evaluate genetic variation in a set of bread wheat (Triticum aestivum L.) landraces and improved materials. Landraces collected from different geographic and agro-ecological zones in Pakistan in 1987, 1989 and 1991 were separated into two groups based on their geographic origins: northern (Himalaya) and south-western (Balochistan) Pakistan. Six AFLP primer combinations detected 453 AFLP markers in the 43 landrace accessions and four high-yield varieties (HYVs). Of these, 225 (49.67%) were rare (shared with < 5% of all accessions). Among these rare alleles, 23 (10.22%) were common in the Himalaya (shared with > 10% of accessions collected there) but were not found in Balochistan. We conclude that there is a higher probability of collecting rare alleles at overall, but which are in contrast locally common ones in the Himalayan region. Gene diversity was 0.17 in the Himalayan group and 0.15 in the Balochistan group. Considerable genetic variability was found in both groups. Accessions from different agro-ecological zones were indistinguishable by cluster analysis, indicating intensive seed trading within the country. Cluster analysis indicated that the landraces and the HYVs are genetically distinct; suggesting that genetic erosion of wheat landraces has been unlikely taken in place. This study provides an example of how analysis of existing materials and data, can serve as a basis for future collection planning and conservation policies.     

A new method for evaluating symplastic cadmium absorption in the roots of Solanum melongena using enriched isotopes 113Cd and 114Cd

Radioisotope techniques are well known as methods for evaluating symplastic ion absorption in roots. In the present study, a new method for evaluating symplastic cadmium (Cd) absorption in plant roots was developed using the enriched isotopes ¹¹³Cd and ¹¹⁴Cd. Seedlings of Solanum melongena were exposed to an enriched isotope solution of ¹¹³Cd at 25°C for 30 min. The roots were excised from each seedling and were then immersed in a cold buffer solution without Cd at 2°C for 120 min to suppress the metabolic activity of the roots. Finally, the roots were treated with a cold buffer solution containing enriched stable isotope ¹¹⁴Cd at 2°C for 120 min, whereby the apoplastically bound ¹¹³Cd was desorbed. We tested the validity of our method for evaluating symplastic Cd in roots compared with the conventional method based on differences in the amount of Cd absorbed at 2°C and 25°C using unlabeled Cd. There was no difference in the symplastic Cd content of the roots between the two methods. These results indicate that it is possible to evaluate the symplastic Cd content in roots using the enriched isotopes ¹¹³Cd and ¹¹⁴Cd.     

A note on the nutritional status of the rice plant in Italy,Portugal, and Spain

In the rice area around Velcelli, grain yields are reasonably high due to good management, and a situation similar to that of the “Akiochi” area in the western part of Japan is prevailing.

In coastal areas of Spain and Portugal, rice yields are frequently very high due to the abundance of solar radiation. In these areas, however, if soil management is inadequate, rice suffers from NaCl injury, zinc deficiency, iron toxicity, or boron toxicity due to the nature of the soils and the influence of brackish water.