Effects of plant residue management on soil properties,surface runoff,and soil loss under rainfall simulation in a semi-arid region in Iran

A 5-year field study was conducted on the effect of plant residue management on soil erosion, runoff, bulk density, penetration resistance, and organic carbon. There were three treatments: burning residues on field (BR), returning residues unto the soil surface after harvesting (TR), and removing residues from soil surface (RR) (control treatment). At the end of the 5-year treatment, a rainfall simulation at 90?mm?h^?1 was applied to each plot. After rainfall simulation started, the runoff volume and soil loss amount in samples were collected at four sampling times. The results showed that the runoff volume for BR (from 145.5?±?12.2 to 190.0?±?11.8?mL) differed significantly (p?≤?0.01) from that of RR (from 32.3?±?5.5 to 67.5?±?11.1?mL) and TR (from 10.0?±?0.7 to 16.7?±?3.3?mL). A significant difference (p?≤?0.01) was also observed between RR and TR regarding runoff volume and soil loss amount in different sampling times, except for the first sampling time (2–4?min). The runoff volume in BR and TR was 215% higher and 294% lower than that of the control (RR), respectively. As compared to the control (RR), soil loss decreased by 96.5% in TR but increased by 192% in BR. The BR increased soil bulk density and penetration resistance by 4.9% and 12.4%, whereas TR reduced them by 2.1% and 15.8%, respectively, as compared to the control (RR). The results indicated that the highest (0.35) and lowest (0.03) runoff coefficients were obtained for BR and TR treatments, respectively. It is concluded that returning plant residues to soil is the best residue management practice in decreasing soil runoff volume and controlling soil erosion in semi-arid regions.     

Comparison of three models describing bromide transport affected by different soil structure types

This study was conducted to investigate the effects of soil structure on bromide (Br) transport through three soils with granular, prismatic, and single-grain structures. The breakthrough curve (BTC) of the single-grain structure was sigmoidal, symmetrical and similar to a piston flow, showing the dominance of mass flow. In contrast, the BTCs of the granular and prismatic structures were initially steep, becoming more gradual at high pore volumes (PVs). The stable structure and preferential pathways caused the early breakthrough of Br in the leachate of these columns. The convection–dispersion equation (CDE), mobile–immobile water (MIM), and dual-permeability (DP) models were fitted to observed data using the program HYDRUS-1D. The equilibrium transport model (CDE) was not as successful as non-equilibrium (MIM and DP) models in describing the Br transport in prismatic and granular soil columns, although it was able to describe the Br transport in single-grain column well. Overall, the results demonstrated the importance of soil structure in pollutant transport through soils.     

利用水稻功能基因SSR标记鉴定水稻种质资源

 利用 16对水稻功能基因的SSR引物研究了 2 3份世界 5个国家不同来源的水稻种质资源的遗传多样性 ,共检测出 78个等位基因变异 ,每对引物可检测 2～ 10个等位基因变异 ,平均为 5 .2个 ,品种间遗传相似系数在0 .13～ 0 .6 4之间。UPGMA聚类分析表明 ,在相似系数 0 .13处可以将材料分为 2大类 ,来自巴西、日本和中国的粳稻全部聚为第Ⅰ类 ,巴西陆稻和原产科特迪瓦的陆稻聚在第Ⅰ类的第三小群 ;第Ⅱ类全为籼稻 ,来源于巴基斯坦的籼稻和 1个来源于韩国的籼稻分布在第Ⅱ类 ,说明水稻功能基因在不同亚种、不同产地来源和不同生态类型的水稻之间存在差异 ,也进一步证实水稻功能基因的SSR标记是研究水稻种质资源分类、地理分布、生态类型和系谱分析的有效工具。     

Forest Road Detection Using LiDAR Data

We developed a three-step classification approach for forest road extraction utilizing LiDAR data. The first step employed the IDW method to interpolate LiDAR point data （first and last pulses） to achieve DSM, DTM and DNTM layers （at 1 m resolution）. For this interpolation RMSE was 0.19 m. In the second step, the Support Vector Machine （SVM） was employed to classify the LiDAR data into two classes, road and non-road. For this classification, SVM indicated the merged distance layer with intensity data and yielded better identification of the road position. Assessments of the obtained results showed 63% correctness, 75% completeness and 52% quality of classification. In the next step, road edges were defined in the LiDAR-extracted layers, enabling accu- rate digitizing of the centerline location. More than 95% of the Li- DAR-derived road was digitized within 1.3 m to the field surveyed nor- rnal. The proposed approach can provide thorough and accurate road inventory data to support forest management.     

Morphometric analysis of the intercarpal ligaments of the equine proximal carpal bones during simulated flexion and extension of cadaver limbs

Despite many reported cases of carpal lameness associated with intercarpal ligament injuries in horses, the morphometry, movement pattern and general intrinsic biomechanics of the carpus are largely unknown. Using osteoligamentous preparation of the carpus prepared from 14 equine cadaver forelimbs (aged 9.62 ± 4.25 years), locomotory simulations of flexion and extension movements of the carpal joint were carried out to observed carpal biomechanics and, thereafter, the limbs were further dissected to obtain morphometric measurements of the medial and lateral collateral ligaments (MLC and LCL); medial and lateral palmar intercarpal ligaments (MPICL and LPICL); intercarpal ligaments between radial (Cr) and intermediate (Ci) carpal bones (Cr-Ci ICL); and intercarpal ligaments between Ci and ulnar (Cu) carpal bones (Ci-Cu ICL). The Cr, Ci, Cu and Ca are held together by a series of intercarpal ligaments and move in unison lateropalmarly during flexion, and mediodorsally during extension with a distinguishable proximo-distal sliding movement (gliding) of Cr and Ci against each other during movement. The mean length of MCL (108.82 ± 9.64 mm) was significantly longer (p = 0.042) than LCL (104.43 ± 7.65 mm). The Cr-Ci ICL has a dorsopalmar depth of 37.58 ± 4.14 mm and a midpoint width of 12.05 ± 3.09 mm and its fibres ran diagonally from the medial side of the Ci in a proximo-palmar disto-dorsal direction (i.e. palmarodistally) to the lateral side of the Cr. The specialized movement of the Cr-Ci ICL, which appeared to be further facilitated by a longer MCL suggest a biomechanical function by which carpal damage may be minimized in the equine carpus.     

Bacterial susceptibility to and chemical composition of essential oils from Thymus kotschyanus and Thymus persicus

Susceptibility of Escherichia coli, Staphylococcus aureus, Bacillus subtilis, Klebsiella pneumonia, and Pseudomonas aeroginosa to the essential oils extracted from two varieties of Thyme, i.e., Thymus kotschyanus Boiss. and Hohen. and Thymus persicus L. at preflowering and flowering stages were studied. The disk diffusion method was used to evaluate the zone of microbial growth inhibition at various concentrations of the oils. Minimal inhibitory concentration and minimal bactericidal concentration of the oils were determined and compared with each other. The oils from the above plants were found to be strongly bactericidal with that of T. kotschyanus being more effective. T. kotschyanusand T. persicus oils analyzed by gas chromatography (GC) and GC/mass spectrometry (MS) lead to identification of 33 and 26 components, respectively. The profile of the oil components from T. persicuswas similar to that of T. kotschyanus in almost all of the compounds but at different concentrations. The major components of T. kotschyanus oil before and at the flowering stages were carvacrol (35.06, 22.75%), thymol (26.60, 16.52%), gamma-terpinene (7.81, 0.34%), gamma-terpinene (4.34, 0%), borneol (2.29, 4.52%), myrcene (0.26, 12.65%), thymolquinone (0, 11.39%), nerol (0, 6.10%), and beta-caryophyllene (0, 5.54%), respectively, and those of T. persicus at the same stages were carvacrol (38.96, 27.07%), thymol (6.48, 11.86%), P-cymene (7.51, 10.16%), gamma-terpineol (0, 9.51%), nerol (15.66, 9.41%), gamma-terpinene (6.11, 6.51%), and thymol acetate (5.29, 5.30%), respectively. The contribution of oil components to its antibacterial property is discussed. High aromatic compound content of the phenol-rich oils seems to account for strong antibacterial activity.     

Landing,consumption, and DNA barcoding of commercial seabream (Perciformes: Sparidae) in Kuwait

1. To our knowledge, this is the first inclusive assessment of the status of Sparidae fisheries in the territorial waters of Kuwait, integrating information on catch trends, consumer preferences, recreational fishing behaviour, and molecular based identification of fish species by DNA barcoding
2. Fisheries landing data were obtained from the official fisheries bulletin released by the Kuwait Central Statistical Bureau. Surveys were conducted to assess consumer preferences on seabream species, landed seabream species, and the behaviour of recreational anglers towards seabream species. DNA barcodes were generated to authenticate commercial seabream using the mitochondrial cytochrome c oxidase subunit I (COXI) gene and then compared with GenBank sequence entries; these sequences were then used to construct a neighbour-joining (NJ) phylogenetic tree.
3. Yellowfin seabream Acanthopagrus latus was the prime and most favoured commercial seabream species (45%), followed by Sparidentex hasta, which was the top-rated secondary, unassessed seabream species. Approximately 54% of households conduct recreational fishing more than twice a month, and most (77%) primarily target S. hasta and Ac. latus. Consumer demand for secondary seabreams, which were not assessed and are listed in the bulletin under the category ‘others’, was evident.
4. The NJ phylogenetic tree revealed that Arabian Gulf seabreams, including those of Kuwait, are genetically different from their counterparts inhabiting neighbouring waters.
5. The data presented here highlight the urgency to modify the existing fisheries list using accurate identification tools, such as DNA barcoding, for the sustainable and conservation-oriented management of local fisheries, which are in decline.

     

Inhibition of P-glycoprotein ATPase and its transport function of Helicoverpa armigera by morin, quercetin and phloroglucinol

Flavonoids (morin, quercetin and phloroglucinol) were tested for their ability to modulate the function of P-glycoprotein ATPase of the insecticide resistant pest Helicoverpa armigera (Ha-Pgp). Flavonoids in the presence of ethylparaoxon or cypermethrin significantly reduced both larval weight as well as survival rate 40-50%. Morin and quercetin inhibited the activity of Ha-Pgp ATPase by 80-90%, whereas phloroglucinol inhibited ATPase activity by 40% at 100 μM concentration. These flavonoids inhibited the verapamil, ethylparaoxon and cypermethrin-stimulated Ha-Pgp ATPase activity. Morin, quercetin and phloroglucinol binding were quantitated by quenching of the intrinsic Trp fluorescence of purified Ha-Pgp ATPase. Drug transport was monitored in proteoliposomes containing Ha-Pgp ATPase using the high affinity fluorescent substrate tetramethylrosamine (TMR) in real time. Addition of the morin and quercetin mediated the collapse of the TMR concentration gradient generated by Ha-Pgp ATPase. The inhibition studies on Ha-Pgp ATPase activity may contribute towards understanding new strategies of the pest to overcome insecticide resistance.