Calcitriol Treatment Attenuates Uric Acid-Induced Kidney Injury via Super Oxide Dismutase-1 (SOD-1) Upregulation and Fibrosis Reduction

Background:Hyperuricemia induces nephropathy through the mediation of oxidative stress, tubular injury, inflammation, and fibrosis. The high uric acid level is associated with the reduction of vitamin D levels. However, the reno-protective effects of this vitamin in hyperuricemia condition remain unknown. This study aimed to elucidate calcitriol treatment in a uric acid-induced hyperuricemia mice model. Methods:Uric acid (125 mg/kg BW) was administered intraperitoneally for 7 (UA7) and 14 (UA14) days. Calcitriol (0.5 g/kg BW) was intraperitoneally injected for the following seven days, after 14 days of uric acid induction (UA14VD7 group). The control group received NaCl 0.9%, by the same route. Serum creatinine was measured using calorimetric method, and uric acid levels were assessed using enzymatic calorimetric assay. Tubular injury and fibrosis were assessed using PAS and Sirius red staining. RT-PCR and qRT-PCR were carried out for the analyses of SOD-1, Collagen-1, and TGF-1 mRNA expression in the kidney. Immunostaining of SOD-1 was performed to detect its expression in the kidney. Results:Uric acid and creatinine levels markedly increased in UA14 groups, followed by an exacerbation of tubular injury. RT-PCR revealed the upregulation of Collagen-1 and TGF-1, along with the downregulation of SOD-1. Calcitriol treatment attenuated the injury with reducing uric acid and creatinine levels, as well as tubular injury. This was associated with lower Collagen-1 and TGF-1 mRNA expression compared to the UA7 and UA14 groups. SOD-1 was upregulated in epithelial cells in the UA14VD7 group. Conclusion:Calcitriol treatment after uric acid induction may attenuate kidney injury through upregulation of SOD-1 and downregulation of Collagen-1 and TGF-1 gene expression. Key Words: Fibrosis, Hyperuricemia, Kidney injury, Superoxide dismutase-1, Vitamin D     

How to define the optimal grid size to map high resolution spatial data?

The development and the release of sensors capable of providing data with high spatial resolution (>?4 000 points ha^?1) in agriculture raises new questions as to how to represent this spatial information. The objective of this study was to propose a methodology to help define the optimal grid size to map high resolution data in agriculture. The geostatistical method finds the grid size which maximizes the sum of two components: (i) the proportion of nugget variance that is removed, and (ii) the proportion of sill variance that remains in the data. The optimum grid size was found to be dependent on the resolution of the available information and the spatial structure of the raw data. Experiments on simulated datasets with varying data resolution (from 500 to 2 000 pts.ha^?1) and spatial structure (range of variogram between 10 and 45 m) showed that the proposed methodology was able to define varying optimal grid sizes (from 5 to 12 m). The proposed geostatistical approach was then applied on a real dataset of total soluble solids/sugar content of table grape so that the optimal mapping grid size could be found. Once it was defined, two interpolation methods: simple averaging over blocks and block kriging, were applied to mapping the data. Results show that both methods help depict the within-field variability in the data. While the averaging procedure is easier to automate, the block kriging approach provides users with a level of uncertainty in the aggregated data. Both mapping approaches significantly impacted the within-field spatial structure: (i) the small-scale variations were ten times lower than in the raw data, and (ii) the signal-to-noise ratio of the aggregated data with the optimal grid was twice as high as that of the raw data. As the proposed geostatistical methodology is a first attempt to define the optimal grid size to map high resolution spatial data, areas for future development applications are also proposed.     

Anaerobic Eury- and Crenarchaeota inhabit ectomycorrhizas of boreal forest Scots pine

Members of the euryarchaeotal genera Methanolobus and Halobacterium as well as group 1.1c Crenarchaeota were enriched from ectomycorrhizal samples and cultured under anaerobic conditions. 16S rRNA gene sequences of Methanolobus were obtained in a H₂ + CO₂ atmosphere and autofluorescent putatively methanogenic microbial cells were detected by epifluorescence microscopy of the anaerobic methane-producing enrichment cultures. Halobacterium and group 1.1c Crenarchaeota grew anaerobically when either H₂ or CH₄ was added to the atmosphere. Group 1.1c Crenarchaeota were also enriched under aerobic conditions on mineral media, but only when methane or methanol was added as carbon sources. The 16S rRNA gene sequences of 1.1c Crenarchaeota grown under both anaerobic and aerobic conditions were highly similar. Our study demonstrates the growth of group 1.1c Crenarchaeota and Halobacteria derived from non-extreme soil environment in non-saline enrichments under anaerobic conditions. The results suggest that 1.1c Crenarchaeota may play a role in the cycling of C-1 substrates in the boreal forest soil ecosystem.     

Virtual trees and light capture: a method for optimizing agroforestry stand design

In agroforestry systems, the distribution of light transmitted under tree canopies can be a limiting factor for the development of intercrops. The light available for intercrops depends on the quantity of light intercepted by tree canopies and, consequently, on the architecture of the tree species present. The influence of tree architecture on light transmission was analysed using dynamic 3D architectural models. The architectural analysis of Acacia mangium and Tectona grandis was performed in Indonesian agroforestry systems with trees aged from 1 to 3 years. 3D virtual trees were then generated with the AmapSim simulation software and 3D virtual experiments in which tree age, planting density, planting pattern and pruning intensity varied were reconstructed in order to simulate light available for the crop. Canopy closure of trees was more rapid in A. mangium than in T. grandis agroforestry systems; after 3 years the quantity of light available for A. mangium intercrops was three times lower than under T. grandis. Simulations with A. mangium showed that practices such as pruning and widening tree spacing enable to increase the total transmitted light within the stand. On T. grandis, modification of the tree row azimuth resulted in changes in the spatial and seasonal distribution of light available for the intercrops. These results are discussed in terms of agroforestry system management.

Low-Cost Synthesis of Organic–Inorganic Hybrid MSU-3 from Gold Mine Waste for CO<Subscript>2</Subscript> Adsorption

Amine-grafted MSU-3 mesoporous silica samples were synthesized from pure and waste silica sources and their CO₂ adsorption performances were evaluated. The obtained samples were characterized using X-ray diffraction (XRD), thermogravimetric analysis (TGA), N₂ adsorption–desorption isotherm analysis, Fourier transform infrared (FTIR), and transmission electron microscopy (TEM). CO₂ adsorption capacities of the samples at different temperatures were determined by TGA. The amine-modified MSU-3 synthesized from waste exhibited the highest CO₂ adsorption capacity of 1.32 mmol/g at 25 °C and 1 bar, depending essentially on the porous texture and the amine content of the material. The CO₂ adsorption isotherms of the synthesized samples were measured by a static volumetric method. Adsorption isotherm indicated that the amine-modified samples presented significantly higher CO₂ adsorption capacity than the pure samples. The Avrami kinetic model fitted the experimental data well and suggested that complex reaction mechanism or the appearance of multiple reaction pathway occurred in the CO₂ adsorption.

Open image in new window

Graphical Abstract CO₂ uptake capacities and TEM images of the amine modified samples

     

Concentration-dependent effect of salicylic acid application on wheat seedling resistance to take-all fungus, <Emphasis Type="Italic">Gaeumannomyces graminis</Emphasis> var. <Emphasis Type="Italic">tritici</Emphasis>

Application of 0.1 and 0.2 mM salicylic acid (SA) significantly reduced take-all disease caused by Gaeumannomyces graminis var. tritici (Ggt) and increased the root and shoot lengths and biomass, whereas 0.5 and 1 mM SA had no significant effect. The effective SA concentrations also increased the activities of soluble peroxidase (SPOX) and cell-wall-bound peroxidase (CWPOX) and the concentration of total phenolic compounds. SPOX activity was highest at days 4 and 3 in healthy roots and those inoculated with Ggt, respectively, and that of CWPOX at day 6 in both healthy and inoculated roots. The concentration of phenolic compound was also highest at day 3 in both healthy roots and those inoculated with Ggt. The results indicate that the protective effect of SA depends on certain concentrations which increase peroxidase activity and phenolic compounds accumulation in the wheat roots; higher SA concentrations did not differ from the controls.     

Short-term effects of fertilization on photosynthesis and leaf morphology of field-grown loblolly pine following long-term exposure to elevated CO(2) concentration

We examined effects of a first nitrogen (N) fertilizer application on upper-canopy needle morphology and gas exchange in approximately 20-m-tall loblolly pine (Pinus taeda L.) exposed to elevated carbon dioxide concentration ([CO(2)]) for 9 years. Duke Forest free-air CO(2) enrichment (FACE) plots were split and half of each ring fertilized with 112 kg ha(-1) elemental N applied in two applications in March and April 2005. Measurements of needle length (L), mass per unit area (LMA), N concentration (N(l)) on a mass and an area basis, light-saturated net photosynthesis per unit leaf area (A(a)) and per unit mass (A(m)), and leaf conductance (g(L)) began after the second fertilizer application in existing 1-year-old foliage (F(O)) and later in developing current-year first-flush (F(C1)) and current-year second-flush (F(C2)) foliage. Elevated [CO(2)] increased A(a) by 43 and 52% in F(O) and F(C1) foliage, respectively, but generally had no significant effect on any other parameter. Fertilization had little or no significant effect on L, LMA, A or g(L) in F(O) foliage; although N(l) was significantly higher in fertilized trees by midsummer. In contrast, fertilization resulted in large increases in L, N(l), and A in F(C1) and F(C2) foliage, increasing A(a) by about 20%. These results suggest that, although both needle age classes accumulate N following fertilization, they use it differently-current-year foliage incorporates N into photosynthetic machinery, whereas 1-year-old foliage serves as an N store. There were no significant interaction effects of elevated [CO(2)] and fertilization on A. Elevated [CO(2)] increased the intercept of the A:N(l) relationship but did not significantly affect the slope of the relationship in either foliage age class.