Pedotransfer functions to assess adsorbed phosphate using iron oxide content and magnetic susceptibility in an Oxisol

Adsorbed phosphate in soils can be chemically extracted; however, this process is both time‐consuming and not cost‐effective if large numbers of samples have to be analysed. Indirect assessment of adsorbed phosphate by pedotransfer functions (PTFs) can help optimize fertilizer strategies. This study aimed to evaluate the spatial variability of adsorbed phosphate (P_ads), iron oxides and magnetic susceptibility (MS) in oxisols and to calibrate PTFs to predict P_ads. A total of 308 soil samples were collected from Hapludox and Eutrudox soils formed from sandstone in Brazil. The contents of clay (196–607 g/kg), iron oxides (40–165 g/kg), MS (1.2–29 × 10^?6 m³/kg) and P_ads (327–842 mg/kg) were in the range of typical values for these highly weathered soils. This study showed that the attributes studied were spatially dependent. Geomorphic surfaces enabled understanding of spatial variability and helped to develop a more efficient sampling scheme to calibrate PTFs. Moreover, the adsorbed phosphate in these oxisols could be predicted by a PTF using iron oxides and MS as predictors. The MS attribute enabled the most accurate prediction (concordance coefficient = 0.95, root‐mean‐square error = 46 mg/kg and relative improvement in root‐mean‐square error = ?4.12) of spatial variability through PTF compared to other predictors.     

Comparative Characterization of Enzymatic Digestion from Fish and Soybean Meal from Simulated Digestive Process of Pacific Bluefin Tuna,Thunnus orientalis

The digestive process of the Pacific bluefin tuna (PBT), Thunnus orientalis, was simulated through two phases of in vitro digestion: acidic digestion with porcine pepsin, followed by alkaline digestion with pancreatic crude extract (PCE) obtained from the PBT to hydrolyze fish meal (FM) and soybean meal (SBM) as protein substrates. The crude protein from FM resulted in a lower degree of hydrolysis (73.3%) compared with SBM (79.2%). However, the resulting digested products showed that FM contained 35% more small peptides, with sizes <6.5 kDa than those from the starting material (>150 kDa). The SBM had an increase of only 1.3% in the similar peptide cut‐offs found after hydrolysis. These results suggested that FM appeared to be a better source of protein according to the amount of low‐molecular weight peptides. In addition, the proteolytic activity of PCE showed that 88.9% of its alkaline proteolytic activity corresponded to trypsin and 2.9% corresponded to chymotrypsin activity. The results shown here demonstrate that peptide sizes are important in identifying suitable protein sources for aquafeed production to reinforce the primary results obtained from the in vitro digestibility using the pH‐Stat system. These results also contribute to a better understanding of the digestibility process in aquatic organisms.     

Associations between postpartum diseases and milk yield and changes in body condition between drying off and parturition of dairy cows in Argentina

ABSTRACT

Aims: To assess the change in body condition score (BCS) during the early and late dry periods and its association with postpartum diseases and milk yield in grazing dairy cows from central Argentina.

Methods: BCS assessments during the dry period, and cow health and milk production records up to 90 days in milk (DIM), were collated for cows from 28 farms at monthly visits between 2007 and 2008. Cows were categorised into four groups; those in Group 1 (n=7,067) maintained or gained BCS during the early and late dry periods; Group 2 (n=2,615) maintained or gained BCS during the early dry period and lost BCS during the late dry period; Group 3 (n=1,989) lost BCS during the early dry period and maintained or gained BCS during the late dry period; and Group 4 (n=5,144) lost BCS during the early and late dry periods.

Results: Cows in Group 1 had reduced odds of having retained fetal membranes (RFM), metritis, and clinical mastitis up to 90 DIM than cows in Group 2 (p<0.001), but the odds of disease were similar to cows in Group 3. The odds of having RFM or clinical mastitis tended to be lower in cows in Group 1 than cows in Group 4 (p=0.08). The odds of cows being culled or dying during the first 90 DIM were lower for cows in Group 1 than for those in Groups 2, 3, and 4 (p≤0.05). Mean accumulated milk yield up to 90 DIM was higher in cows in Group 1 than Group 2 and Group 4 (p<0.001), but was similar to that of cows in Group 3 (p=0.28).

Conclusions and clinical relevance: Cows that lost BCS during the late dry period had increased odds of being diagnosed with several postpartum diseases and had decreased milk yield compared to cows that maintained or gained BCS during the entire dry period. Loss of BCS during any stage of the dry period was also associated with increased incidence of culling or death during the first 90 DIM. These results should raise awareness among dairy cattle producers of the importance of properly managing cow body condition during the dry period, especially during the late dry period.     

SALTIRSOIL: a simulation model for the mid to long‐term prediction of soil salinity in irrigated agriculture

The SALTIRSOIL model predicts soil salinity, sodicity and alkalinity in irrigated land using basic information on soil, climate, crop, irrigation management and water quality. It extends the concept of the WATSUIT model to include irrigation and crop management practices, advances in the calculation of evapotranspiration and new algorithms for the water stress coefficient and calculation of electrical conductivity. SALTIRSOIL calculates the soil water balance and soil solution concentration over the year. A second module, SALSOLCHEM, calculates the inorganic ion composition of the soil solution at equilibrium with soil calcite and gypsum at the soil’s CO₂ partial pressure. Results from comparing predicted and experimentally determined concentrations, observations and predictions of pH, alkalinity and calcium concentration in calcite‐saturated solutions agree to the second significant figure; in gypsum‐saturated solutions the standard difference between observations and predictions is <3% in absolute values. The algorithms in SALTIRSOIL have been verified and SALSOLCHEM validated for the reliable calculation of soil salinity, sodicity and alkalinity at water saturation in well‐drained irrigated lands. In simulations for horticultural crops in southeast Spain, soil solution concentration factors at water saturation, quotients of electrical conductivity (EC₂₅) at saturation to electrical conductivity in the irrigation water, and quotients of sodium adsorption ratio (SAR) are very similar to average measured values for the area.     

Mild Drought Stress‐Induced Changes in Yield,Physiological Processes and Chemical Composition in Festuca,Lolium and Festulolium

The impact of mild drought stress (3 weeks at 40 % field water capacity) on yield, physiological processes, accumulation of proline and phenolic compounds and forage quality parameters in forage grasses was evaluated in pot experiments. During four different growing periods, the effects of water deficit were assessed in nine varieties from five species (Lolium perenne, Lolium multiflorum, Festuca pratensis, Festuca arundinacea and Festulolium braunii). All measured parameters were affected by drought stress in the different cuts. Photosynthesis, transpiration rate, stomatal conductance and dry matter yield were significantly lower in drought stress than under well‐watered conditions in all varieties. Higher water‐use efficiency was only observed during the first and fourth drought period, while this was not the case in the second and third. Mild drought stress significantly increased the content of proline, phenolic acid, flavonoids, water‐soluble carbohydrates and protein. All tested grasses showed also an increase of organic matter digestibility and cell wall digestibility under drought stress conditions.     

Effect of wilting,silage additive,PEG treatment and tannin content on the distribution of N between different fractions after ensiling of three different sainfoin (Onobrychis viciifolia) varieties

Sainfoin (Onobrychis viciifolia) is a tanniniferous, leguminous plant that has potentially beneficial effects on protein utilization in ruminants. As ensiling causes protein breakdown and elevated levels of buffer soluble N (BSN), we studied the distribution of N before and after ensiling sainfoin. Three varieties of sainfoin were either direct‐cut and frozen directly or wilted and frozen before later ensiling in mini‐silos with and without acidification with Promyr (PM; an acidifying commercial mixture of propionic and formic acid) and with or without polyethylene glycol (PEG). Extractable tannins (ET) and protein‐bound tannins (PBT) were measured with an HCl/butanol method in an attempt to correlate tannin levels to N fractions. The sainfoin silages showed good ensiling characteristics and had relatively high concentrations of undegraded protein. The effect of wilting on BSN levels (g/kg N) was dependent on sainfoin variety (P < 0·001). PEG increased and PM decreased the level of BSN in the silages (P < 0·001). PM treatment also produced less non‐protein N and ammonia‐N (P < 0·05) as compared with no additive. Addition of PEG to the silage increased the BSN‐proportion 1·8‐ and 2·6‐fold for both DM stages. A strong tannin‐protein binding effect is, therefore, confirmed in sainfoin. However, correlations between tannin levels (ET and PBT) and BSN were poor in the (non‐PEG) silages, indicating either that the HCl/butanol method is unsuitable for measuring tannin in silages or that qualitative attributes of tannins are more relevant than quantitative. The HCl/butanol method seems therefore not to be useful to predict degradation of protein in sainfoin silages.     

Soil CO2 emission in sugarcane management systems

Sugarcane management systems affect soil attributes such as the carbon cycle. This fact has stimulated the sugar and alcohol industry to refine the sugarcane production systems by replacing the pre-harvest burning (PB) and manual harvest with mechanized harvesting followed by residue deposition. The aim of this study was to evaluate different management systems with respect to C cycling carbon dioxide and soil parameters (chemical, physical and biological) which were determined over the season. Three sugarcane cultivation systems were evaluated at the following periods: (a) PB, (b) 5-year green harvest and (c) 10-year green harvest. The results indicated that CO₂ emission was 36% greater in the 10-year sugarcane green harvest system than in the PB system. The bulk density and macroporosity were the factors that were most affected by the different sugarcane management systems and that significantly influenced soil CO₂ emissions. The principal component analysis showed that soil CO₂ emission was 18% influenced by base saturation (V%) and 14% by pH, especially in the PB area. Additionally, 19% was affected by carbon and macroporosity in the 5- and 10-year green harvest areas, respectively. From our results, it can be concluded that the most CO₂ emissions are in the areas of sugarcane green, this is due to the higher carbon concentration when compared with the area of burning sugarcane. The parameters that most influenced the CO₂ emissions were bulk density, porosity, macroporosity, pH and V%.