Dissolution Factors of Ta, Th, and U Oxides Present in Pyrochlore

Air pollution can be a problem in industrial processes, but monitoring and controling the aerosols in the work place is not enough to estimate the occupational risk due to dust particle inhalation. The solubility in lung fluid is considered to estimate this risk. The aim of this study is to determine in vitro specific dissolution parameters for thorium (Th), uranium (U), and tantalum (Ta) associated to crystal lattice of a niobium mineral (pyrochlore). Th, U, and Ta dissolution factors in vitro were obtained using the Gamble solution (simulant lung fluid, SLF), particle induced X-ray emission, and alpha spectrometry as analytical techniques. Ta, Th, and U are present in the pyrochlore crystal lattice as oxide; however, they have shown different dissolution parameters. The rapid dissolution fraction (f _r), rapid dissolution rate (λ _r), slow dissolution rate (f _s), and slow dissolution fraction (λ _s) measured for tantalum oxide were equal to 0.1 and 0.45 and 0.00007 day^?1, respectively. For uranium oxide, f _r was equal to 0.05, λ _r was equal to 1.1 day^?1, and λ _s was equal to 0.000068 day^?1. For thorium oxide, f _r was 0.025, λ _r was 1.5 day^?1, and λ _s was 0.000065 day^?1. These results show that chemical behavior of these three compounds in the SLF could not be represented by the same parameter. The ratio of uranium concentration in urine and feces samples from workers exposed to pyrochlore dust particle was determined. These values agree with the theoretical values of estimated uranium concentration using specific parameters for uranium oxide present in pyrochlore.     

Copper Biosorption by Biomass of Marine Alga: Study of Equilibrium and Kinetics in Batch System and Adsorption/Desorption Cycles in Fixed Bed Column

Copper biosorption onto chemically modified biomass of marine alga Sargassum filipendula was investigated in a batch reactor and a fixed bed column. Experiments were carried out in the batch reactor to obtain kinetic and equilibrium data and to assess the copper desorption efficiency of different eluent solutions. The pseudo-first-order, pseudo-second-order, and Langmuir kinetic models were used to correlate kinetic data. The experimental data fitted well to the pseudo first order and Langmuir kinetic models. Langmuir and Freundlich models were applied to describe the equilibrium data obtained at a fixed temperature of 30°C and at pH values of 3.0, 4.0, 5.0, and 6.0. The maximum capacities of copper biosorption onto the algal biomass were 1.43, 1.59, 2.40, and 2.36 mequiv./g at pH 3.0, 4.0, 5.0, and 6.0, respectively. The efficiencies of two eluent solutions (calcium chloride and hydrochloric acid) for copper removal from the biomass were evaluated at different concentrations (0.1, 0.2, 0.5, and 1.0 mol/L). The efficiencies of the calcium chloride solutions varied from 1% to 14%, while efficiencies varying from 95% to 99% were obtained when hydrochloric acid solutions were applied. Three adsorption/desorption cycles were carried out in a fixed bed column using 0.1 mol/L hydrochloric acid as eluent solution. The results showed that an increase in the number of cycles led to a reduction in the adsorption capacity of the alga. The desorbed copper fraction presented no significant variation, remaining around 63% in the three adsorption/desorption cycles.     

Estimated Quantities and Trends of Cadmium, Lead, and Mercury in US Municipal Solid Waste Based on Analysis of Incinerator Ash

The degradation of diethyl phthalate (DEP) in aqueous solution by titanium dioxide (TiO₂) photocatalysis has been investigated in our research. DEP was completely removed in the solution by 50-min irradiation. Results show that DEP degradation rate was affected by initial DEP concentration, photocatalyst amount, light intensity, and pH. Photocatalytic degradation intermediates were identified by gas chromatography-mass spectrometry intermediates were identified by gas chromatography-mass spectrometry. The major intermediates are methyl benzoate, ethyl benzoate, and carboxylic derivatives. The photocatalytic degradation process was found to obey first-order reaction. Consequently, the result of photocatalytic degradation could be an efficient method of DEP removal from wastewater.     

A field evaluation of anthelmintics for control of cyathostomes of horses in Brazil

The anthelmintic efficacy of ivermectin (IVM), piperazine citrate (PPZ) and fenbendazole (FBZ) alone, and combinations of FBZ with varying dosages of PPZ, was evaluated for the control of strongyles of Mangalarga equids. In all cases of positive strongly egg counts per gram of faeces (EPG) before and after treatment, pure populations of cyathostome larvae with eight gut cells were consistently observed in faecal cultures. The faecal egg count reductions (FECR) were evaluated between Day 7 and Day 56 post-treatment. Significant differences (P less than or equal to 0.05) were found between Day 7 and Day 49 when comparing the mean EPG values of IVM with those of the other anthelmintics. PPZ alone and the combination of FBZ (7.5 mg kg-1) and PPZ (55 mg base kg-1) did not show significant differences during the trial; both groups exhibiting an FECR of greater than 90% between Day 7 and Day 30. Horses treated with the combinations of FBZ (7.5 mg kg-1) and PPZ at either 40 or 25 mg base kg-1, and with FBZ alone at either 7.5 or 15 mg kg-1, showed an FECR of less than 90% 2 weeks after treatment. The emergence of a degree of resistance of strongyles to FBZ and PPZ in a segment of the cyathostomes in this population is suggested.     

Effects of remifentanil infusion regimens on cardiovascular function and responses to noxious stimulation in propofol-anesthetized cats

OBJECTIVE: To evaluate the effects of 2 remifentanil infusion regimens on cardiovascular function and responses to nociceptive stimulation in propofol-anesthetized cats. ANIMALS: 8 adult cats. PROCEDURES: On 2 occasions, cats received acepromazine followed by propofol (6 mg/kg then 0.3 mg/kg/min, i.v.) and a constant rate infusion (CRI) of remifentanil (0.2 or 0.3 microg/kg/ min, i.v.) for 90 minutes and underwent mechanical ventilation (phase I). After recording physiologic variables, an electrical stimulus (50 V; 50 Hz; 10 milliseconds) was applied to a forelimb to assess motor responses to nociceptive stimulation. After an interval (> or = 10 days), the same cats were anesthetized via administration of acepromazine and a similar infusion regimen of propofol; the remifentanil infusion rate adjustments that were required to inhibit cardiovascular responses to ovariohysterectomy were recorded (phase II). RESULTS: In phase I, heart rate and arterial pressure did not differ between remifentanil-treated groups. From 30 to 90 minutes, cats receiving 0.3 microg of remifentanil/kg/min had no response to noxious stimulation. Purposeful movement was detected more frequently in cats receiving 0.2 microg of remifentanil/kg/min. In phase II, the highest dosage (mean +/- SEM) of remifentanil that prevented cardiovascular responses was 0.23 +/- 0.01 microg/kg/min. For all experiments, mean time from infusion cessation until standing ranged from 115 to 140 minutes. CONCLUSIONS AND CLINICAL RELEVANCE: Although the lower infusion rate of remifentanil allowed ovariohysterectomy to be performed, a CRI of 0.3 microg/kg/min was necessary to prevent motor response to electrical stimulation in propofol-anesthetized cats. Recovery from anesthesia was prolonged with this technique.     

Additive gene action for resistance to Puccinia striiformis F.SP. Tritici in Triticum dicoccoides

Summary Seven single-plant selections of wild emmer, with temperature-sensitive minor-effect genes for stripe rust resistance, were intercrossed in eight combinations. The resulting progenies were studied for a possible additive gene action.The transgressive segregation towards resistance in F₂ observed in all the combinations indicates that additive gene action for resistance indeed occurs in wild emmer. The common occurrence of this phenomenon in random combinations suggests further that several minor-effect genes are involved.Following selection of the most resistant plants in F₂, a marked shift towards resistance was noted in F₃, which demonstrates a positive response to selection. In some instances, additive resistance selected for (in F₂) at the high temperature-profile was expressed (in F₃) also at the low temperature-profile. This kind of resistance, when utilized in breeding programmes, promises therefore to be effective over a range of temperatures.     

Implications of early selection for grain colour on iron and zinc content and productivity of common bean

Brazilian consumers prefer beans of the beige grain colour. Common beans help supply dietary requirements for iron and zinc. The objectives of this study were (i) to determine whether early selection for grain colour affects the iron and zinc content and the grain yield in common beans and (ii) if an association between these characteristics was found, to obtain lines of carioca‐type grains with a high iron and zinc content and good grain yield. We evaluated 96 F_3:4, F_3:5 and F_3:6 progeny at two locations for iron and zinc content and grain yield. We selected 48 progeny for grain colour and chose 48 others at random. We found that early selection for grain colour does not affect the zinc content and grain yield. A positive and high association was found between iron and zinc content, and both iron and zinc content were slightly negatively correlated with grain yield. It is possible to obtain common bean lines combining a high iron and zinc content with good grain yield as long as a selection index is used.     

Influence of pH and calcium on the growth,polysaccharide production and symbiotic association of<Emphasis Type="Italic"> Sinorhizobium meliloti</Emphasis> SEMIA 116 with alfalfa roots

The Sinorhizobium -legume interaction is sensitive to a number of environmental factors, soil acidity being one of the most important. In the typic Hapludoll soil of the central-southern region of Córdoba (Argentine) it was found that the nodulation of alfalfa ( Medicago sativaL.) roots was impaired with a reduction in shoot dry matter under conditions of soil acidity (pH 5.5) Our results showed that the addition of lime as dolomitic limestone at a concentration of 1 t ha ^-1to acid soil caused a significant increase in the nodulation of alfalfa roots inoculated with the strain Sinorhizobium meliloti SEMIA 116 (recommended inoculum for alfalfa) in the greenhouse experiments. The success of the lime treatment may be related not only to an increase in the pH values but also to an increase in the Ca concentration, improving the growth of S. meliloti and its nodulation ability under acidic conditions. In this study, we also demonstrated an increment in the bacterial growth rate as well as in the production of exopolysaccharides and lipopolysaccharides under low pH (5.5) and a high Ca concentration (5 mM) in the culture medium.