A Class of Exact Solution for RLW-Burgers Equation

A class of analytic solution for RLW Burgers equation and KdV Burgers equation are given which include results of some papers.These solutions can be expressed as some linear combination of solutions of Burgers equation and RLW equation or KdV equation which correct conclusion in some paper.     

A New Method for Parameterized Design of Metallic Doors and Windows

According to the graphics characteristics of metallic doors & windows design and based on the research of graphics dimension restriction problems. This paper provides a new method for parameterized design of metallic doors & windows in virtue of expression solution. In this method, the restrictions of graphic elements have been changed into the parameter expressions of sizes and positions of graphic elements. Through the calculation of such expressions, the parameter driven method has been reached. Thus the parameterization of graphics can be easier and quicker than before. It can be used to setup the open parameterized graphics libraries.     

铁矿粉烧结液相流动性能的特征数方程的建立

为解决在研究铁矿粉烧结液相流动性能时通常只考虑面积增长率这一终点信息,而没有考虑过程信息的缺陷以及采用多个指标来表征流动性能在使用上的不便,对影响流动性的因素进行了分析,结合量纲分析和白金汉定理推导出了能定量表征流动性强弱的流动性特征数(LD),简化特征数方程后得到等效流动性特征数(Ld Θ)。试验采用了可视卧式高温炉,记录了铁矿粉烧结液相流动的整个过程信息,通过基础实验和对照实验确定液相流动的起点和终点之后,可以得到每一种矿粉相应的等效流动性特征数数值。测量5种铁矿粉在两种方法下的流动性指标,当只考虑面积增长率时的流动性强弱顺序为A>C≈D>B>E,新方法下为Ld ΘA>Ld ΘD>Ld ΘC≈Ld ΘE>Ld ΘB,两种方法下的指标相近,但是综合了各种重要信息的新指标能进一步区分出各个因素对流动性能的影响程度。     

基于KPCA-WLSSVM的建筑能耗预测模型

为降低建筑能耗影响因素间复杂相关性对模型性能的影响,建立了一种基于KPCA-WLSSVM的建筑能耗预测模型。利用核主元分析(KPCA)对输入变量进行数据压缩,消除变量之间的相关性,简化模型结构;进一步采用加权最小二乘支持向量机(WLSSVM)方法建立建筑能耗预测模型,同时结合一种新型混沌粒子群-模拟退火混合优化(CPSO-SA)算法对模型参数进行优化,以提高模型的预测性能及泛化能力。通过将KPCA-WLSSVM模型方法应用于某办公建筑能耗的预测中,并与WLSSVM、LSSVM及RBFNN模型相比,实验结果表明,KPCA-WLSSVM模型方法能有效提高建筑能耗预测精度。     

CO2-O2混合喷吹对铁液中C、V元素氧化的影响

为了验证用CO2替代部分O2进行转炉氧化提钒的可行性,在实验室进行了CO2-O2混合喷吹提钒模拟实验。结果显示C的氧化量与C的氧化速率随CO2含量的增加而升高;V的氧化量随CO2含量的增加而降低,其中CO2含量为20%与纯O2对C、V的氧化量接近;纯O2喷吹时C的氧化量为34.56%,V的氧化量为96.85%;CO2含量为20%混合气体喷吹时C的氧化量为36.83%,V的氧化量为93.29%;以V的相对氧化量与C的相对氧化量的比值(ΔV/ΔC)来衡量提钒保碳能力,CO2含量为20%的最终ΔV/ΔC为5.96,CO2含量,40%、60%、80%的最终ΔV/ΔC均小于3.8;反应前期,V的氧化速率随CO2含量的增加而升高,反应后期V的氧化速率随CO2含量的增加而降低。     

The analysis of China wind power industry

The development course of China wind power industry is reviewed by six stages. National policies on wind power industry are elaborated from the aspects of laws & regulations, planning, finance & taxation and electrovalence policy. And these policies have played an important supporting and regulating role in the development of wind power industry. The development status of China wind power industry is analyzed based on wind turbine installed capacity, wind power output and their growth rate. It is explained that national wind turbine manufacturers have kept developing and become strong by the data of new global installed capacity share of mainland wind turbine manufacturers in 2013 and the new global market share of 8 domestic enterprises among the world top 15 wind turbine manufacturers. But there are still 5 key problems which influence the development of national wind turbine need to be solved, including lack of top-level design, abandon and restriction wind power seriously, lack of R&D abilities, some of the key parts relying on imports and wind turbine facing a quality guarantee dilemma. Taking Sinovel Wind Group Co. Ltd. and Xinjiang Goldwind Sci & Tech Co. Ltd., the two leading companies as an example, their performance is analyzed and it’s pointed out that the wind industry must keep vigilant after the overspeed development. The enterprises should try to avoid neglecting cultivating their inner core competitive ability, including technology advancements and products reliability. Occupying the market with low price competition and expanding blindly is also not desirable. At last, the development prospects of our country’s wind power industry are analyzed and three proposals are put forward.     

发动机用平板型空滤器流动阻力特性分析和改进

为减小平板型空滤器流动阻力以增大进气量,对平板型空滤器流动阻力特性开展了实验研究,获得了空滤器流动阻力随流量变化的规律和阻力构成成分。阻力随流量的增大而加速增大,滤芯阻力约占整个空滤器阻力的一半,入口流量为120 m 3/h时,总阻力为915.3 Pa,滤芯阻力为426.4 Pa。在实验获得滤芯阻力参数的基础上,提出采用多孔介质跃升模型对平板型空滤器内部流场开展三维数值仿真分析,结果表明,仿真结果与实验结果比较吻合,最大误差为5.67%。滤芯阻力同样约占整个阻力的一半,另一半阻力主要为出口处阻力,其余壁面阻力约占15%。最后,在实验和仿真分析的基础上,提出了改进模型并进行了仿真分析。结果表明,改进模型阻力有较大程度的下降,入口流量为120 m 3/h时,总阻力为588.2 Pa,较原始模型下降了32.2%;增大空滤器流通横截面积是减小阻力以增大进气量的有效手段,改进空滤器壁面的平滑性是补充措施。     

强度参数统计特性对边坡稳定可靠性的影响

由于对边坡强度参数统计特性考虑不全面,使得边坡可靠性指标计算值偏小,对应的失效概率偏大,常常超过10%,设计中难以采纳,造成地基可靠度规范的制定和执行进展缓慢。以某高速公路全风化花岗岩土质高边坡为工程背景,在分析土质参数统计特性的基础上,采用极限平衡理论和蒙特卡罗模拟法,系统地分析了土质强度参数的均值不定性、变异性、相关性、区间特性和空间变化性等对边坡稳定可靠性的影响。结果表明：土性参数的各种统计特性对边坡稳定可靠性均具有不同程度的影响。可靠性指标计算值随抽样距离的减小而增加,随c或φ均值的增大而增加,随c和φ的变异系数的增大而减小,随c和φ相关系数绝对值的增大而增加,考虑区间性后可靠性指标计算值也明显变大。即变异性对边坡稳定不利,而相关性、区间性和空间变化性对边坡稳定有利。因此,准确而全面地考虑土质参数的统计特性,尤其是在参数变异性和相关性的基础上加以考虑土性参数空间变化性和区间性会更加符合工程实际,且计算结果趋于安全,有利于地基可靠度规范的推广运用和边坡工程的安全评价。     

各向异性砂土剪切带角度的理论分析

针对平面应变条件下各向异性砂土剪切带角度的试验规律,采用传统的3种理论和分叉理论进行对比分析。将平面应变条件下剪切带角度的试验结果按照传统3种理论整理发现,尽管传统3种理论可以估算同种砂剪切带角度的极小、中间和极大值,但无法解释其各向异性规律。砂土在平面应变条件下破坏时会产生明显的剪切带,当剪切带方向和砂土沉积面方向接近时,会较早诱发剪切带的产生,使材料强度降低,造成了平面应变条件下各向异性强度规律明显不同于常规三轴条件下的试验规律,采用分叉理论结合各向异性模型则可以有效解释这个规律。随砂土沉积面角度的变化,模型可以从细观角度解释常规三轴条件下剪切带角度的单调变化的试验规律,结合分叉理论可以描述平面应变条件下其先减小然后增大的规律。通过几种理论对比分析表明,模型结合分叉理论不但能够描述多种应力状态下的平面应变和常规三轴应力条件下剪切带角度表现的不同规律,而且能够从细观角度解释其各向异性成因。