Zirconium-Modified Activated Sludge as a Low-Cost Adsorbent for Phosphate Removal in Aqueous Solution

A highly effective zirconium-modified activated sludge (Zr(IV)-AS) adsorbent was prepared from activated sludge and applied to remove phosphate from aqueous solutions by batch and column experiments. Characterized results revealed that zirconium was successfully loaded onto the activated sludge (AS), and the specific surface area and pore volume were substantially improved after zirconium loading on the AS. Zr(IV)-AS exhibited a high adsorption affinity for phosphate and the maximum adsorption amount was 27.55 mg P·g^?1 at 25 °C. Adsorption isotherms of phosphate could be described by the Langmuir model, and the adsorption kinetics were well described by the pseudo-second-order model. Phosphate adsorption on Zr(IV)-AS increased monotonically with decreasing solution pH. The presence of SO₄^2? in water resulted in slightly decreased phosphate adsorption on the adsorbent even at a high concentration (25 mmol/L), and a greater influence of HCO₃^? on adsorption could be ascribed to the increased solution pH with the addition of the HCO₃^?. Column adsorption experimental results showed that the adsorbent has excellent phosphate adsorption properties and that the effluent can meet the requirement of phosphorus in the national wastewater discharge standard of China. Phosphate-saturated Zr(IV)-AS can be effectively desorbed in 0.1 mol L^?1 NaOH solution, and the regenerated adsorbent still possessed the high capacity. The adsorption between the adsorbent and the phosphate is due to the electrostatic interaction and anionic exchange at the surface of the Zr(IV)-AS. Furthermore, this approach provides a possibility of treating wastewater with waste and has the potential for industrial applications for the removal of phosphate from wastewater.     

Performance and Kinetic Study on Bioremediation of Diazo Dye (Reactive Black 5) in Wastewater Using Spent GAC–Biofilm Sequencing Batch Reactor

Combinations of sequential anaerobic and aerobic process enhance the treatment of textile wastewater. The aim of this study was to investigate the treatment of diazo dye Reactive Black 5 (RB5)-containing wastewater using granular activated carbon (GAC)–biofilm sequencing batch reactor (SBR) as an integration of aerobic and anaerobic process in a single reactor. The GAC–biofilm SBR system demonstrated higher removal of COD, RB5 and aromatic amines. It was observed that the RB5 removal efficiency improved as the concentration of co-substrate in the influent increased. The alternative aeration introduced into the bioreactor enhanced mineralization of aromatic amines. Degradation of RB5 and co-substrate followed second-order kinetic and the constant (k ₂) values for COD and RB5 decreased from 0.002 to 0.001 and 0.004 to 0.001 l/mg h, respectively, as the RB5 concentration increased from 100 to 200 mg/l in the GAC–biofilm SBR system.     

Sedimentary characterization of Tagus estuarine beaches (Portugal)

Background, Aim and Scope  The distribution of sediments in estuarine beaches is controlled by the interactions between sediment supply, hydrodynamic processes and human intervention. The main purpose of this study is to characterize the sediments of Tagus estuarine beaches in order to understand their origin and to contribute to a better knowledge of the Tagus estuary sediment budget. Methods  Surface sediment samples were collected across beach profiles and sand grain size analysis was performed by dry sieving. Grain size statistics for the median (d₅₀) and standard deviation (SDM) were obtained using the Moment method. This study was complemented by a qualitative evaluation of the sediment composition. Cross-shore topographic surveys were conducted for selected sampling sites. Results  Tagus estuarine beach sediments are mainly composed of quartz sand particles which are fine-grained and well sorted near the mouth of the estuary and medium to coarse-grained and moderately sorted in the inner domain. Compositional results show evidence of active anthropogenic sediment sources, especially in the coarser fractions. Discussion  The analysis of the textural and compositional characteristics of beach sediments in the inner estuarine domain is compatible with local sedimentary sources, while a marine signature is present at the mouth and inlet channel sediments. In the inner domain, differences in the sedimentary processes are represented by the textural characteristics of the sediments, such as the sorting degree and the gravel content. Sediment characteristics also reflect human intervention in the system, with the introduction of anthropogenic and allochthonous particles and the mixture of sediments from different sources. Conclusions  The sediments of the inner Tagus estuarine beaches are derived from local Plio-Pleistocene outcrops while inlet and outer estuary beaches reveal a dominant marine source. Beach textural variability observed in the inner domain is not related to wave forcing gradients, but mainly to variations in the sedimentary processes along the estuarine margins and to human intervention. Results show that the Tagus estuarine beaches depended, almost exclusively, on sediment input from local sources until the last century. With increasing human occupation, sediment transfers became dominated by anthropogenically related activities mainly connected with the occupation of estuarine margins and dredging. Recommendations and Perspectives  Further studies should extend the present level of knowledge in what concerns sand transport patterns through additional compositional and geochemical analysis, and the development of new techniques in order to allow the quantitative evaluation of the impact of human activities on the sediment budget.     

Soil compaction and forest floor removal reduced microbial biomass and enzyme activities in a boreal aspen forest soil

Soil enzymes are linked to microbial functions and nutrient cycling in forest ecosystems and are considered sensitive to soil disturbances. We investigated the effects of severe soil compaction and whole-tree harvesting plus forest floor removal (referred to as FFR below, compared with stem-only harvesting) on available N, microbial biomass C (MBC), microbial biomass N (MBN), and microbial biomass P (MBP), and dehydrogenase, protease, and phosphatase activities in the forest floor and 0–10 cm mineral soil in a boreal aspen (Populus tremuloides Michx.) forest soil near Dawson Creek, British Columbia, Canada. In the forest floor, no soil compaction effects were observed for any of the soil microbial or enzyme activity parameters measured. In the mineral soil, compaction reduced available N, MBP, and acid phosphatase by 53, 47, and 48%, respectively, when forest floor was intact, and protease and alkaline phosphatase activities by 28 and 27%, respectively, regardless of FFR. Forest floor removal reduced available P, MBC, MBN, and protease and alkaline phosphatase activities by 38, 46, 49, 25, and 45%, respectively, regardless of soil compaction, and available N, MBP, and acid phosphatase activity by 52, 50, and 39%, respectively, in the noncompacted soil. Neither soil compaction nor FFR affected dehydrogenase activities. Reductions in microbial biomass and protease and phosphatase activities after compaction and FFR likely led to the reduced N and P availabilities in the soil. Our results indicate that microbial biomass and enzyme activities were sensitive to soil compaction and FFR and that such disturbances had negative consequences for forest soil N and P cycling and fertility.     

Water absorption of boron-treated and heat-modified wood

Heat treatments change the chemical and physical properties of wood and dimensional stability and hygroscopicity are affected as a result of modifications of wood cell components. This study evaluated the water absorption of wood specimens treated with boron compounds followed by heat treatment. Sugi (Cryptomeria japonica D. Don) sapwood specimens treated with either boric acid (BA) or disodium octoborate tetrahydrate (DOT) solutions were heat-modified at either 180° or 220°C for 2 or 4 h. Carbohydrate composition and water absorption of the specimens were then measured and compared with those of untreated and unheated specimens. Wood carbohydrates were significantly degraded in the specimens after heat treatment. The heat treatment evidently decreased the water absorption and the heat-modified specimens absorbed less water than unheated specimens. The higher the treatment temperature and the longer the treatment time, the lower the amount of absorbed water. The boron-treated and heat-modified specimens, however, showed increased water absorption due to the hygroscopic properties of BA and DOT.     

Effects of different supplements on tetraploid black locust (<Emphasis Type="Italic">Robinia pseudoacacia</Emphasis> L.) silage

Preparation of silage is a common method to preserve green forage. It plays an important role in improving forage utilization,     

CRISPR-Cas Technology in Plant Science

CRISPR-Cas technology has raised considerable interest among plant scientists, both in basic science and in plant breeding. Presently, the generation of random mutations at a predetermined site of the genome is well mastered, just like the targeted insertion of transgenes, although both remain restricted to species or genotypes amenable for plant transformation. On the other hand, true genome editing, i.e. the deliberate replacement of one or several nucleotides of the genome in a predetermined fashion, is limited to some rather particular examples that generally concern genes allowing positive selection, for example tolerance to herbicides. Therefore, further technological developments are necessary to fully exploit the potential of genome editing in enlarging the gene pool beyond the natural variability available in a given species. In principle, the technology can be applied to any quality related, agronomical or ecological trait, under the condition of upstream knowledge on the genes to be targeted and the precise modifications necessary to improve alleles. Published proof of concepts concern a wide range of agronomical traits, the most frequent being disease resistance, herbicide tolerance and the biochemical composition of harvested products. The regulatory status of the plants obtained by CRISPR-Cas technology raises numerous questions, in particular with regard to the plants that carry in their genomes the punctual modifications caused by the presence of the Cas9 nuclease but not the nuclease itself. Without clarification by the competent authorities, CRISPR-Cas technology would continue to be a powerful tool in functional genomics, but its potential in plant breeding would remain untapped.     

Seasonal Changes of Shoot Carbohydrates and Growth Characteristics of ‘Trakya İlkeren’ Grape Variety (<Emphasis Type="Italic">Vitis vinifera</Emphasis> L.)

This research was conducted to determine the changes in the seasonal carbohydrates of annual shoots and growth characteristics of 10 years old ‘Trakya ?lkeren’ grape variety. Grapevines are grafted on 5BB and 5C rootstocks and they were grown in heavy clay soil conditions. In the study, changes of sugar, starch and total carbohydrates were determined from bud burst to dormancy. While sugar, starch and total carbohydrates showed significant differences (P < 0.01) there were no differences between rootstocks. Although sugar, starch and total carbohydrates of shoots decreased from bud burst to blooming, they increased thereafter until vegetative growth stopped. Total carbohydrates of annual shoots have been found to accumulate in period from blooming to harvest. Total and mean leaf area, shoot length and diameter, total chlorophyll and chlorophyll a/b ratio showed significantly variation among rootstocks and phenological stages (P < 0.01). Whereas the highest chlorophyll contents were found in the blooming, it was found at the lowest through to harvest. Overall mean and total leaf area, shoot length and shoot diameter, total chlorophyll content and chlorophyll a/b ratio were significantly higher on 5BB grafted vines. In the study, 5BB rootstocks are found suitable in terms of shoot carbohydrate accumulation and growth characteristics for ‘Trakya ?lkeren’ grape variety.     

Effects of Iron Sulfate,Zinc Sulfate,Iron Chelate,Powder Sulphur and Humic Acid Applications on Vegetative Growth of Sweet Cherry (<Emphasis Type="Italic">Prunus avium</Emphasis> L.)

This study was carried out in ?scehisar district of Afyonkarahisar on ‘0900-Ziraat’ sweet cherry cultivar for two successive years in 2011 and 2012. Ten different applications consisting of 80?g FeSO₄.7H₂O tree^?1, 20?g FeEDDHA tree^?1, 420?mL TK?-Hümas tree^?1, 80?g FeSO₄.7H₂O + 420?mL TK?-Hümas tree^?1, 200?g powder sulphur (S) tree^?1, 80?g FeSO₄.7H₂O + 200?g powder S tree^?1, 25?g ZnSO₄.7H₂O tree^?1, 25?g ZnSO₄.7H₂O + 420?mL TK?-Hümas tree^?1 and 25?g ZnSO₄.7H₂O + 200?g powder S tree^?1 were subjected for determination of their effect on vegetative growth of sweet cherry. In this study, shoot diameter, shoot length, leaf total chlorophyll content, leaf area and leaf iron (Fe) and zinc (Zn) contents were obtained. Shoot length, shoot diameter and leaf area showed general increases in 80?g FeSO₄.7H₂O + 200?g powder S tree^?1 and 25?g ZnSO₄.7H₂O + 200?g powder S tree^?1 treatments.The results clearly indicated that he treatments had different effects on the shoot length and shoot diameter although there was a differences between the experimental years. Particularly, significantly positive effects of the treatments on leaf total chlorophyll was apparent for the second year’s observations. In addition, Fe and Zn concentrations in leaf were markedly increased in response to the treatments.