Synthesis,characterization and ultrafiltration of reactive dyes. Application by exhaustion and/or ink-jet printing. IV.

Three new bis azo reactive dyes of different metallic salts (Na, K, Li) were synthesized. The synthesis was obtained by diazotization of 4-amino-2:5 di methoxy phenylene-beta hydroxyl ethyl sulphone sulphate ester and coupling with 1-amino-8-hydroxynaphthalene-3,6-disulfonic acid (H-acid) (moles ratio 2:1). The dyes were purified-concentrated by ultrafiltration technology, characterized and applied on cotton, wool and nylon 6,6 fabric by exhaustion (dyeing) and by ink-jet printing. Fastness properties of the dyeings were measured. Wash fastness was investigated according to international standard methods and was found to be very good to excellent in all cases, while light fastness values were medium to low. Ink-jet ink formulations were prepared using the ultra filtrated reactive blue dyes UF RB(a-c) and their properties pH, conductivity, surface tension and viscosity were monitored over a period of 90 days. The inks were used to print digitally cotton and nylon 6,6 samples and wash- and light fastness properties of the prints were measured. Wash fastness properties were excellent while light fastness values are low Colour measurements of the dyeings and prints were conducted.     

Mechanical behavior of nylon 66 tyre cord under monotonic and cyclic extension: Experiments and constitutive modeling

Many industrial products are made of cord-rubber composite materials. Their mechanical behavior not only depends on rubber but also depends on cord. Nylon 66 cord is one of the most important reinforcement in these products. This paper research the mechanical behavior of nylon 66 cord under various load cases. A series of experiments were carried out to obtaining stress-strain curves under different load cases. Complex changes of the modulus and Mullins effect can be found in monotonic and cyclic tension, respectively. Mechanism of these behaviors has been analyzed considering both the twisted structure and material. A phenomenological constitutive model, accounting for different loading conditions, has been firstly proposed base on strain energy density function and damage mechanics method. The proposed model has been verified by comparing the predicted results with experimental data. It has been found that the proposed model predicted the stress-strain curves that were consistent with the experimental data. The proposed model can be implemented in finite element software for engineering design and application.     

Improvement of ink-jet printing performances using β-cyclodextrin forming inclusion complex on cotton fabric

Cotton fabric was modified with β-cyclodextrin (β-CD) forming inclusion complex to yield color strength, pattern sharpness, and color fastness for ink-jet printing. The modified cotton fabric was confirmed with the presence of new strong absorption peaks around 1713 cm^-1 and 1243 cm^-1 in FT-IR. β-CD had been covalently grafted on cotton fabric via the esterification reaction of citric acid (CTR) with cellulose and β-CD. The results indicated that printing performances of the ink-jet printed fabric were enhanced through β-CD modification. The K/S value was enhanced from 4.21 to 6.72, the width of printed line was decreased from 1.48 mm to 1.25 mm, and the color fastness was improved to 3-4 level. These improvements were due to the truncated cone structure of β-CD, which can form inclusions with water-based pigment. Meanwhile, the crease recovery performance was also improved with the aid of CTR. A comparison between the unmodified and modified cotton fabric suggested that the crease recovery angle of β-CD modified cotton fabric was increased by 25.0 % in the warp direction. Therefore, printing performance and crease recovery performance of β-CD modified and water-based pigment printed cotton fabric were enhanced remarkably.     

Amplification of the <Emphasis Type="Italic">Phytophthora infestans</Emphasis> RG57 loci Facilitates <Emphasis Type="Italic">in planta</Emphasis> T-RFLP Identification of Late Blight Genotypes

Late blight, caused by the oomycete Phytophthora infestans (Mont.) de Bary, is a devastating disease in potato and tomato and causes yield and quality losses worldwide. The disease first emerged in central America and has since spread in North America including the United States and Canada. Several new genotypes of P. infestans have recently emerged, including US-22, US-23 and US-24. Due to significant economic and environmental impacts, there has been an increasing interest in the rapid identification of P. infestans genotypes. In addition to providing details regarding the various phenotypic characteristics such as fungicide resistance, host preference, and pathogenicity associated with various P. infestans genotypes, information related to pathogen movement and potential recombination may also be determined from the genetic analyses. Restriction fragment length polymorphism (RFLP) analysis with the RG57 loci is one of the most reliable procedures used to genotype P. infestans. However, the RFLP procedure requires propagation and isolation of the pathogen and relatively large amounts of DNA. Isolation of the late blight pathogen is sometimes impossible due to the poor condition of the infected tissues or the presence of fungicide residues. In this study, we describe a procedure to identify P. infestans at the molecular level in planta using terminal restriction fragment length polymorphism (T-RFLP) of the RG57 loci. This T-RFLP assay is sufficiently sensitive to detect and differentiate P. infestans genotypes directly in planta without propagation and isolation of the pathogen, to facilitate the timely implementation of best management practices.     

Antibacterial Bombyx Mori silk fabric modified with reactive chitosan quaternary ammonium salt and its laundering durability

A new fiber-reactive chitosan derivative was synthesized in two steps from a chitosan of low molecular weight. First, a water-soluble chitosan derivative, N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride (short for HTCC), was prepared by reacting chitosan with 2,3-epoxypropyltrimethylammonium chloride. Second, HTCC was further modified by reacting with N-(hydroxymethyl)-acrylamide to prepare a fiber-reactive chitosan derivative, O-methyl acrylamide quaternary ammonium salt of chitosan (short for NMA-HTCC), which can form covalent bonds with silk fiber under alkaline conditions. The chemical structure of NMA-HTCC was characterized by Fourier transform infrared spectrum (FTIR) and nuclear magnetic resonance (NMR). The substitution degree of HTCC and the double-bond content of NMA-HTCC were tested. Then NMA-HTCC was used for antibacterial finishing of Bombyx Mori silk fabric. The results showed that silk fabric treated with NMA-HTCC had a significantly improved antibacterial activity to Staphylococcus aureus and Escherichia coli, and the antibacterial activity of silk fabric finished by NMA-HTCC was much better than that finished by chitosan and HTCC. Bombyx Mori silk fabric modified with NMA-HTCC demonstrated excellent durable antibacterial activity, even after 50 repeated launderings, the bacterial reduction rate of silk fabric maintained over 95 %.     

Fabrication of electropsun PLGA and small intestine submucosa-blended nanofibrous membranes and their biocompatibility for wound healing

In recent decades, tremendous research has focused on the production of nanoscale fibers using synthetic polymers, with the goal of fabricating nanofibrous scaffolds for wound healing. However, the hydrophobicity of such polymers typically hinders attachment and proliferation of the cells. In this study, we combined poly-d,l-lactide-co-glycolide (PLGA) and small intestine submucosa (SIS) to fabricate blended nanofibers for wound healing by electrospinning. PLGA and SIS were dissolved in 1,1,1,3,3,3-hexafluoro isopropanol to produce different weight ratios of PLGA/SIS-blended nanofibrous membranes (NFM). Physicochemical characterization of the electrospun NFM was performed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, water contact angle analysis, degradation test and tensile testing. The PLGA/SIS-blended NFM showed improved hydrophilicity and tensile strength. Better infiltration, attachment and proliferation of rat granulation fibroblasts of PLGA/SIS-blended NFMs compared to PLGA NFMs were identified by morphological differences determined by SEM and a water-soluble tetrazolium salt assay kit. Based on our results, the PLGA/SIS blended NFMs were found to be suitable for use as a potential material for wound dressing.     

Dyeing performance of the azo dyes containing trifluoromethyl group for polyester fabrics and its single crystal structure

The structures of disperse dyes and their intermolecular interactions have important impacts on dyeing and printing performances for polyester fabrics. The fluorine dyes show some unique molecular stability and photochemical properties. The dyeing property of the azo dye containing trifluoromethyl group for polyester fabrics, 4'-(N-acetoxyethyl-Nethyl)- amino-2-bromine-4-nitro-6-trifluoromethylazo- benzene (D1), was investigated and compared with the similar structure disperse dye. The results show that the high color yield and good exhaustion of the dyed PET fabrics could be obtained. The polyester fabrics dyed with D1 had excellent light fastness. Its single crystal was prepared and the supramolecular interactions were solved by X-ray diffraction. Dye D1 formed triclinic crystals in a trimeric packing mode. The C-F bond distances of CF3 are 1.2730 Å, 1.2240 Å and 1.2900 Å, respectively. The two benzene rings linked azo unit (-N=N-) are obviously twist. The dihedral angle of the two benzene rings is 50.23 o. There are six weak hydrogen bonds around trifluoromethyl group in the intramolecule and intermolecule. The excellent light stability of the dye should be attributed to its unique supramolecular structure.     

Fabrication of hydrophobic/oleophilic cotton fabric by mussel-inspired chemistry for oil/water separation

A straightforward approach was proposed to modify cotton fabric for oil/water separation based on musselinspired reaction. The poly(DMA-Octadecyl acrylate) was designed to contain key chemical constituents present in mussel adhesive proteins by free radical polymerization of dopamine hydrochloride and octadecyl acrylate, which strongly adsorbed to fabric substrates, providing a special surface for fabric. The chemical structure, surface topography, and surface wettability of the fabric were characterized. The results showed that as-prepared cotton fabric displayed a high CA of >150° when dripped water droplets were on the modified fabric surface, and the oil contact angle (OCA) was close to 0°, it had excellent potential to be used in practical applications and has created a new method of fabric modification for oil/water separation.     

Enzymatic treatment on cotton fibers: degradation kinetics of pectin and influence of shape change on adsorption

Alkaline pectinase was one of the most effective enzymes to treat cotton as alternative agent to replace the conventional alkaline method. Removal of pectin and cutin was considered the explanation for improvement of wettability as well as water adsorption on cotton fiber. However, degradation kinetics of pectin is unclear, and the influence of fiber shape on property changes after enzymatic treatment was ignored. The main objective of this work was to reveal interactions between pectinase and cotton fiber for mechanism study. A heterogeneous catalysis kinetic equation, which is associated with Langmuir adsorption model and enzyme deactivation, was used to describe the heterogeneous catalysis. The enzymatic process conditions were optimized. Raw cotton fibers, pectinase-treated and alkali-treated fibers were characterized by impurities content determination, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscope (SEM). Mechanism of water adsorption enhancement on treated fibers was discussed. In addition to elimination of the outer impurities, flat fibers with less twist and shape changes of lumen were also obtained to ensure better accessibility and water adsorption after enzymatic treatment.     

Nano-calcium carbonate reinforced polypropylene and propylene-ethylene copolymer nanocomposites: Tensile vs. impact behavior

Improvement of both the tensile and impact strength of the same polymeric material has always been a great challenge for the plastic industry. The study focuses on the effect of incorporation of calcium carbonate nanoparticles (0.3 wt% to 15 wt%) into three polypropylene (PP) based matrices viz. PP homopolymer, propylene-ethylene (PP-PE) copolymer and the blend of PP:PP-PE (30:70) to improve their impact behavior without hampering the tensile strength much. A loss in both the tensile and impact properties was observed in PP based nanocomposite. However, PP-PE based nanocomposites showed a significant improvement in impact strength (47 %) at 10 wt% loading with a loss of tensile strength by 22 %. To minimize this loss a blend of PP:PP-PE (30:70) was explored as a matrix. At 10 wt% loading, this matrix showed an improvement of 30 % in impact strength whereas the tensile loss was minimized to 10 %. Further, silane coupling agent which promoted good interfacial adhesion was used for best compositions. The variation of crystalline morphology of the nanocomposites with various formulations was analyzed using differential scanning calorimetry and X-ray diffraction.