烯效唑浸种对干旱胁迫下工业大麻幼苗形态、渗透调节物质及内源激素的影响

选用0.4 mg·L~(-1)的烯效唑(S_(3307))浸种工业大麻"火麻一号"种子,采用盆栽试验方法,于大麻三叶期设置清水浸种后正常供水(CK)、清水浸种后干旱胁迫(D)和烯效唑浸种后干旱胁迫(D+S)3个处理,探讨烯效唑浸种对干旱胁迫下工业大麻幼苗形态、渗透调节物质及内源激素的影响。结果表明:与D处理的植株相比,D+S处理显著提高了根系干、鲜重,分别提高46.67%～61.54%和16.46%～25.53%;恢复了胁迫后期的地上部干、鲜重,复水4 d后地上部干、鲜重较D处理分别提高了4.38%和2.23%;促进了根系生长的能力,干旱胁迫8 d后,D+S处理较D处理根长、根表面积、根体积、根总投影面积、分枝数、交叉数和根尖数分别增加了34.48%、34.77%、69.10%、70.00%、29.62%、54.28%和33.07%;提高了幼苗叶片SPAD值,降低了细胞膜透性,增加了可溶性糖和可溶性蛋白含量,干旱胁迫8 d后D+S处理较D处理SPAD值增加了28.30%,细胞膜透性减少了17.22%,可溶性糖和可溶性蛋白含量分别增加了17.32%～36.78%和5.07%～7.94%。干旱胁迫8 d后,D+S处理使工业大麻叶片中脱落酸(ABA)含量增加了1.02倍,水杨酸(SA)和茉莉酸(JA)含量分别降低了17.79%和14.40%。可见,烯效唑浸种能通过调控工业大麻幼苗生长及生理指标来增强其抗旱能力,缓解干旱胁迫对幼苗造成的伤害。     

Quantitative trait loci mapping for yield-related traits under low and high planting densities in maize (Zea mays)

Average maize yield per hectare has increased significantly because of the improvement in high-density tolerance, but little attention has been paid to the genetic mechanism of grain yield response to high planting density. Here, we used a population of 301 recombinant inbred lines (RILs) derived from the cross YE478 × 08–641 to detect quantitative trait loci (QTLs) for 16 yield-related traits under two planting densities (57,000 and 114,000 plants per ha) across four environments. These yield-related traits responded differently to high-density stress. A total of 110 QTLs were observed for these traits: 33 QTLs only under low planting density, 50 QTLs under high planting density and 27 QTLs across both densities. Only two major QTLs, qCD6 and qWKEL2-2, were identified across low- and high-density treatments. Seven environmentally stable QTLs were also observed containing qED6, qWKEL3, qRN3-3, qRN7-2, qRN9-2 and qRN10 across both densities, as well as qRN9-1 under low density. In addition, 16 and eight pairs of loci with epistasis interaction (EPI) were detected under low and high planting densities, respectively. Additionally, nine and 17 loci showed QTL × environment interaction (QEI) under low- and high-density conditions, respectively. These interactions are of lesser importance than the main QTL effects. We also observed 26 pleiotropic QTL clusters, and the hotspot region 3.08 concentrated nine QTLs, suggesting its great importance for maize yield. These findings suggested that multiple minor QTLs, loci with EPI and QEI, pleiotropy and the complex network of “crosstalk” among them for yield-related traits were greatly influenced by plant density, which increases our understanding of the genetic mechanism of yield-related traits for high-density tolerance.     

南美白对虾池塘养殖水质智能控制系统设计与开发

南美白对虾池塘养殖对于水体质量有着较为严苛的要求,残饵及生物排泄物的增多会大量消耗水体溶解氧,进而打破水体动态平衡,导致NH₃-N、NO₂-N等毒害成分升高,引起南美白对虾病害甚至导致死亡,造成养殖户经济损失并且阻碍了南美白对虾养殖产业的健康发展。针对上述问题,笔者研究并开发一种能够实时监测养殖池塘水质,并能根据南美白对虾生长习性智能控制增氧机、水泵等养殖设备的南美白对虾池塘养殖水质智能控制系统。系统具有控制智能、运行可靠、集成度高等特点,在养殖生产试验中取得了良好效果,保证了南美白对虾养殖过程的安全,有效降低了南美白对虾池塘养殖风险。     

甘蔗与蔗茅杂交亲本及后代材料的抗旱性鉴定

研究旨在筛选出优良抗旱育种材料,为今后甘蔗抗旱育种和抗旱栽培技术提供重要的理论依据。采用盆栽干旱处理,测定蔗茅野生种无性系、甘蔗栽培品种（系）及其杂交后代共12份材料苗期与抗旱相关的8项生理生化指标,利用极点排序法对供试材料的抗旱性进行了综合评价。结果表明：干旱胁迫下,12份供试材料的Pro、MDA、SS及PMP均呈上升趋势,SP、Chl和SOD活性呈下降趋势,CAT活性有升有降。极点排序法分析表明,12个供试材料的抗旱强弱为：‘蔗茅99-2’>‘蔗茅99-1’>‘蔗茅99-4’>‘蔗茅I91-8’>‘蔗茅99-3’>‘蔗茅90-29’>‘滇蔗01-58’>‘滇蔗04-14’>‘滇蔗02-39’>‘蔗茅II91-2’>‘新台糖10’>‘崖城89-9’,说明蔗茅优质抗旱性状可以通过基因渗透方式传递给后代。在苗期干旱胁迫下,‘蔗茅99-2’在渗透调节等方面表现出积极的生理响应。     

4个国外接骨木属种质资源引种与生物学特性研究

为探讨4个接骨木品种在河南省郑州地区的引种表现及适应性,2015—2019年定期观测引种的‘金叶’、‘金羽’、‘花叶’、‘紫云’4个国外接骨木品种,采用层次分析法进行性状评价。研究结果表明,露地栽培中,引种的4个接骨木品种均可在郑州地区正常生长、开花、结果。4个接骨木品种均生长健壮,枝繁叶茂,花期较长,较耐低温。以观赏性、适应性、生长特性权重分配分别为0.4、0.3、0.3进行综合分析评价,综合分值表现为‘金叶’接骨木>‘花叶’接骨木>‘金羽’接骨木>‘紫云’接骨木。由此可见,4种接骨木均具有较高的观赏价值和适应性,可广泛用于郑州地区城市园林绿化和美化。     

浙江红花油茶高接换冠成活率影响因素研究

为研究浙江红花油茶高接换冠成活率影响因素,解决嫁接成活率低的问题,2013年6月从中国林业科学研究院亚热带林业研究所引进浙江红花油茶优树穗条,在青田县大垟山林场开展浙江红花油茶高接换冠试验,分析砧木林郁闭度、坡位、砧木生长势及接穗保存时间等因素对嫁接成活率的影响。结果表明,林分郁闭度在0.3~0.7之间,随着郁闭度增加嫁接平均成活率提高;郁闭度在0.7~0.9之间,随着郁闭度增加,嫁接成活率降低;当郁闭度为0.7时,嫁接成活率最高为88.8%。山腰的嫁接成活率高达86%,显著高于山顶和山脚。浙江红花油茶砧木生长势越强嫁接成活率越高。接穗于采集当天嫁接效果最好成活率达89.1%,接穗保存1、2、3、4、5、6天嫁接,成活率分别为85.2%、75.2%、51.6%、28.1%、12.2%、9.3%。偏相关分析表明,各因素对嫁接成活率影响由大到小依次为接穗保存时间(-0.97)、郁闭度(0.85)、生长势(0.81)、坡位(-0.65)。     

水稻突变体W33高位分蘖特性利用价值研究

为探讨水稻突变体材料W33高位分蘖特性在水稻育种上的利用价值。以野生型水稻恢复系R818及其高节位分蘖突变体W33为试验材料,用盆栽试验研究R818和W33的植株、分蘖和穗部性状差异,用大田栽培控制性试验比较R818和W33分蘖、产量构成性状及子粒产量差异,测得参试材料各性状数据。结果表明,生长前期W33和R818株高、主茎叶均长无明显差异,中后期二者株高、主茎叶均长渐显显著或极显著差异;W33单株平均分蘖数是R818的7.5~8.8倍,平均有效穗数是R818的8.6倍,分蘖平均成穗率与R818相当,但单穗穗长、枝梗数和着粒数明显低于R818,而千粒重与R818无明显差异;W33和R818单株籽粒产量均随密度增大而降低,并以最低密度条件下最高,最高密度条件下最低;尽管W33单穗产量明显低于R818,但在相同栽插密度条件下,W33和R818群体产量差异不显著(F=3.7868<F_0.05,1,4);在一定密度范围内,W33能充分发挥其旺盛的分蘖力和较高的成穗率优势,以弥补单穗产量较低的缺陷,其群体产量最终达到与R818相当的水平。说明W33旺盛的分蘖力和较高的分蘖成穗率特性在水稻育种上具有一定的利用价值。