不同树莓品种叶片解剖结构与抗旱性的关系

以树莓叶片为试材,分析了叶片的厚度气孔密度和表皮细胞、表皮毛、栅栏组织、海绵组织、保卫细胞等叶解剖结构,比较了不同树莓品种的抗旱性。结果表明:"凯欧"和"莎妮"的叶片最厚,"加拿大黑莓"次之,其次是"南方黑树莓""海尔特兹"的叶片最薄;"凯欧"的上下表皮、栅栏组织均最厚,其次是"莎妮""加拿大黑莓"和"南方黑树莓"居中,"海尔特兹"最薄;"凯欧"和"莎妮"的气孔密度均最大,"加拿大黑莓"和"南方黑树莓"居中,"海尔特兹"最小;隶属函数综合分析发现,5个树莓品种中"凯欧"的耐旱性最强,其次是"莎妮",再次是"南方黑树莓"和"加拿大黑莓";"海尔特兹"的耐旱性最弱。     

曲拉通和硝酸混合溶液直接提取快速测定草鱼中铅含量

为建立快速测定草鱼中铅含量的方法,通过分析曲拉通和硝酸混合溶液浓度、提取时间、称样定容体积比例等因素的影响,以及基体改进剂的使用效果,确定了草鱼中铅元素提取测定的最佳条件。验证结果显示：采用曲拉通和硝酸混合溶液提取草鱼中铅元素方法的提取率为86.5%～95.6%,加标回收率为91.5%～95.6%,精密度均小于4.0%,检出限和定量限分别为0.011和0.032 mg/kg,满足了国家标准GB 5009.12—2017第一法石墨炉原子吸收光谱法的要求。与国家标准方法比较,本研究建立方法的样品前处理时间从4～12 h缩短至0.2 h内,酸试剂用量从湿法消解的7～12 mL减少至1～2 mL;前处理过程无需高温消解,无需其他前处理设备,避免了样品污染和待测元素损失,实现了降低分析成本以及保护环境和试验人员的目的。结果表明,该方法是一种简单、准确、绿色、快速测定草鱼中铅含量的方法,尤其适合大量样品检测。     

ON STUDY DIGGED FIELD MOVEMENT''S LAW BY EXPERIMENTAL METHOD OF LASER HOLOGRAPHIC MOIRE INTERFERMETRY

The high-precision displacement measuring technology of optic-measuring mechanics is, for the first time,successfully applied on the similar model of the model land-layer with a new-type variable modulus of elasticity. The angle of movement and the distributed displacement of upper and lower rock-layers are measured. The technology is a combination of laser's technology and the modern chemical sticker-it is called the sticking moire interferometry. Compared with the measured values, the result is very satisfactory.     

Reuolution and Research of Green Automobile

The green is as a symbol of no pollution,no public harm and environmental protection. The green automobile is the inevitable results that the automobile technique continuously developes. A new style vehicle--the green automobile is the urgent solicit of environmental protection is developed. The automobile industry can develop continuously. This article mainly discusses the importance of the green auto_mobile's research and development,the development status in quo and prospect of the green auto_mobile technique in the world,and states the relationship between the green automobile technique and environmental protection from green technical system theoretically clarify the study of green automobile,including its design and the system,the manufacture and its technology,the energy,the rebuild engineering and a series of subjects. How to evaluate the cycle and the evaluable mark of the green automobile,the prospect of green automobile are pointed out.     

Dynamics of Actin Polymerization

The process of actin polymerization and depolymerization have some relation with its function,the activation of such process is compatible to its functions. The polymerization progress is divided into four steps: The first step is the activation of the monomer actin. The nucleation of actin nucleus forms in the second step which limits the polymerization speed. The elongation of the F-actin filaments happens in the following step. In the last step, a steady-state is attained, the length of the filament does not change because the polymerizing rate in the barbed end is the same with the depolymerizing rate in the pointed end. Some factors which affect the polymerizing process, such as nucleotide, actin related proteins are discussed. The aim is to know more about how to assemble the complicated system with biomacromolecule and what to function.     

Melt Flow in Alloy Melted Pool Under the Action of Laser

Melt flow in the course of laser alloying is considered on the basis of mechanics. The findings show that the melt flow in laser alloying pool is mainly controlled by two action forces,i. e. the surface tension force on alloying pool.surface,caused by the temperature difference on the pool surface and the buoyancy force in alloying pool caused by the temperature difference in the horizontal direction in the melt pool. These two forces differ in their acting areas. The analysis of the Bond dimensionless number used for laser alloying shows that the two force actions are in the same order,and almost equal under the certain condition.     

Detecting Technology of Cabel Surface Defect Based on DSP and Image Recognition

The damage of bridge cable directly hazards the normal use of bridge and the safety of people. The paper discussed the signal acquisition and detection system which takes embedded DSP processor as core technology, combined with CCD, video decode chip, SDRAM, FLASH ROM, and established the fast measuring algorithm of the surface corrosion and damage, which includes deteminating the processing region, improving medium filter, sobel edge detection and dynamic threshold segment, close operation of morphology, computing defect area and saving. The experimental resuits show that this method implemented the real-time, non-contact and intelligence detecting of cable surface defect and gives the specifications of the system.     

基于KPCA-WLSSVM的建筑能耗预测模型

为降低建筑能耗影响因素间复杂相关性对模型性能的影响,建立了一种基于KPCA-WLSSVM的建筑能耗预测模型。利用核主元分析(KPCA)对输入变量进行数据压缩,消除变量之间的相关性,简化模型结构;进一步采用加权最小二乘支持向量机(WLSSVM)方法建立建筑能耗预测模型,同时结合一种新型混沌粒子群-模拟退火混合优化(CPSO-SA)算法对模型参数进行优化,以提高模型的预测性能及泛化能力。通过将KPCA-WLSSVM模型方法应用于某办公建筑能耗的预测中,并与WLSSVM、LSSVM及RBFNN模型相比,实验结果表明,KPCA-WLSSVM模型方法能有效提高建筑能耗预测精度。     

60Co-γ射线辐射对香福禄考发芽率及幼苗长势的影响

用60Co-γ射线辐射香福禄考种子,观察其发芽率和幼苗生长情况。结果表明:30、60 Gy辐射对发芽率有促进作用,60、70 Gy辐射则对幼苗生长有很好的促进作用。