短期围栏封育对高寒草甸植物群落及土壤理化性质的影响

充分了解围栏封育对植物群落及土壤理化性质的影响,是合理制定草甸恢复和利用相关政策、促进当地畜牧业经济可持续发展的关键。本研究通过对西藏三江并流区封育2年的高寒草甸的群落样方调查与土壤理化性质测定,结果表明,比较自由放牧,围封后地上和地下生物量分别提高26.24%和8.94%,但物种多样性指数略有下降;围封后土壤电导率、盐度和总溶解固体分别下降26.50%,29.03%,30.15%;围栏内地上生物量与土壤盐度、总溶解固体、电导率呈显著正相关(P<0.05),地下生物量与硝态氮、温度呈显著正相关(P<0.05);围栏外地下生物量与介电常数、体积含水率呈显著负相关(P<0.05),与铵态氮呈显著正相关(P<0.05)。研究结果表明,2年短期围封对高寒草甸植物群落及其土壤理化性质均有一定改善,可以作为应对草甸退化的干扰手段与管理措施。     

金针菇多糖的提取及含量测定

探讨了用温度70℃热水提取、sevag法除蛋白、乙醇分级沉淀提取金针菇多糖,以及用硫酸-蒽酮法测定其含量的方法。该方法测得多糖的总收率为金针菇湿质量的0.11%,测定多糖的线性范围为1～16μg/mL,对金针菇多糖含量测得的RSD小于2.24%,回收率为97.6%～102.8%。     

生态技术在现代农业中的地位及其技术群构成

提出了现代农业的主要支撑技术包括生态技术、生物技术和管理技术,并分析了此三类支撑技术的相互关系;通过深入比较,指出生态技术在现代农业中应占主导地位,这是现代农业发展的内在要求,是中国生态环境现状的必然选择,是建立社会主义和谐社会的必然趋势;同时提出了生态技术群中应该重点发展的主要技术:立体农业技术、综合养殖生态技术、特色农业技术、多色农业技术、设施农业技术、农业综合节水技术、农业污染综合防治技术和无公害绿色农产品标准化生产技术等。     

Distributed Power Flow Method Based on Ward Equivalent

With interconnecting and developing of power system, the problem of power flow computation on dispersed data resource need to be solved. A new distributed computation method of power flow based on Ward equivalent is presented. According to master-slaver splitting principle, multi-area interconnected power system is divided into master-slaver areas. Boundary buses in different areas are defined as different bus-types. Neighborhood areas are equivalent by Ward equivalent principle, and the equivalent injection power and equivalent impedance are worked out. Power flows from master area to slaver areas are solved by Newton method, and the equivalent injection power and equivalent impedance on the boundary are modified by their solutions. The process above repeats until to convergence. The proposed distributed power flow method takes full advantage of the information of power, voltage, network configuration in neighborhood areas, so it is better on convergence and quality of solution. The proposed algorithm is testified by IEEE 14-bus system and a practical 181-bus system.     

A FINITE ELEMENT ALGORITHM FOR PARALLEL PROCESSING OF MULTI-FRONTS

In this paper,a new algorithm for solving large-scale finite element system is presented, which utilizes the architecture of parallel processing. Firstly, the structure is partitioned into sub-regions. Then multi-fronts are used to assemble and eliminate concurrently in every sub-region. Thus the condensed interface stiffness matrices and load vectors are obtained. By serially assembling and solving global equation to get interface displacements and backing to every sub-region, the inter-nodal displacements and element stresses can be solved. The results of computation show that it can not only increase the speed of computation,but also save the memory space of computer effectively. This algorithm is an effective method for solving large-scale structural finite element systems.     

Nonlinear Finite Element Analysis of RC Deep Flexural Simply Supported Beams Using Disturbed Stress Field Model

A nonlinear finite element analysis of 4 RC deep flexural simply supported beams with the program VT2 is presented. Crack development and failure modes , longitudinal reinforcement strain distributions and load -deflection curves were compared as a result in order to evaluate the validity of the disturbed stress field model to analyse such deep simply supported beam.     

急、慢性冷应激对雏鸡腓肠肌及血清抗氧化功能的影响

【目的】探讨自由基在冷应激对禽类机体损伤中所起的作用,为探索促进动物冷适应的方法,提高动物的抗寒能力提供一定的理论依据;【方法】应用化学比色法检测了急、慢性冷应激对腓肠肌和血清中总抗氧化能力(T-AOC)、过氧化氢酶(CAT)活性、谷胱甘肽过氧化物酶(GSH-Px)活性、超氧化物歧化酶(SOD)活性及丙二醛(MDA)含量的影响;【结果】急性应激时,随应激时间的延长,腓肠肌T-AOC与SOD活性均逐渐降低,GSH-Px活性、CAT活性及MDA含量均逐渐升高,血清T-AOC逐渐降低,GSH-Px活性、CAT活性、SOD活性及MDA含量均逐渐升高;慢性应激时,随应激时间的延长,腓肠肌T-AOC、GSH-Px活性、CAT活性及SOD活性均逐渐升高,MDA含量逐渐降低,血清T-AOC、GSH-Px活性、CAT活性及MDA含量均逐渐升高,SOD活性逐渐降低;【结论】表明急、慢性冷应激均可使机体的抗氧化功能发生改变,诱发氧化胁迫,导致机体内自由基增多,对机体造成损伤。     

联合收获机前进速度模糊控制系统多目标遗传优化

针对联合收获机前进速度模糊控制系统参数设计具有主观性,导致作业性能不理想的问题,以切纵流联合收获机样机为研究对象,构建联合收获机前进速度模糊控制系统仿真模型,并建立控制性能和收获性能的优化目标函数来衡量联合收获机的作业性能,利用多目标遗传算法对模糊控制系统的隶属函数和输送槽、割台螺旋输送器和切流滚筒对前进速度的影响因子进行优化。通过对优化前后模型仿真对比和两组田间试验数据分析,表明优化后的控制系统在受外界干扰情况下控制性能得到了较好的保持,收获性能在喂入量变化不大情况下,单位平均损失率分别由1.45%和1.26%降至1.12%和1.14%,联合收获机的总体作业性能得到改善。     

基于SLMD的生物质热解动力学预测模型

采用单纯形格子混合设计法(SLMD)对纤维素、半纤维素和木质素3种生物质组分进行复配优化设计,并在综合热分析仪上进行了热解试验。分析了3组分混合热解特性,建立了由生物质3组分比例直接计算动力学参数的预测模型,对模型进行了试验验证。结果表明:纤维素热解反应级数较低(1.20),活化能较高(134.50 k J/mol),指前因子较大(3.49×1012s-1),热解较为迅速与剧烈;半纤维素和木质素热解的反应级数较高(1.30、1.32),活化能较低(33.51、19.98 k J/mol),指前因子较小(9.43×103、107 s-1),热解较为缓慢;3组分在混合热解中对动力学参数存在交互影响,纤维素对活化能和指前因子的影响较为显著,而半纤维素与木质素对反应级数的影响较大;动力学参数预测模型精度较高,可有效预测生物质热解动力学参数。