Interaction of contaminated sediment from a salt marsh with estuarine water: evaluation by leaching and ecotoxicity assays and salts from leachate evaporation

Purpose

Wastes from a former Portuguese steel plant were deposited between 1961 and 2001 on the riverbank of a tributary of the Tagus River creating a landfill connected to the river, posing a potential contamination risk to the Tagus estuary ecosystem. This study aims to assess the transfer of chemical elements from contaminated sediments to the estuarine water from cycles of sediment leaching so as to evaluate the ecotoxicity of the leachates, and to analyze the solid phases crystallized from those leachates.

Materials and methods

Landfill sediment and estuarine water samples were collected during low tide. Sediment samples were analyzed for pH, electric conductivity (EC), C_org, NPK, and iron oxides. Leaching assays (four replicates) were done using estuarine water (200 cm³/replicate) and 1.5 kg of sediment per reactor. Each reactor was submitted to four leaching processes (0, 28, 49, and 77 days). The sediment was kept moist between leaching processes. Sediment (total (acid digestion) and available fraction (diluted organic acid extraction-Rhizo)) elemental concentrations were determined by inductively coupled plasma–instrumental neutron activation analysis (ICP/INAA). Leachates, and estuarine and sediment pore waters were analyzed for metals/metalloids by ICP/mass spectrometry (MS) and carbonates/sulfate/chloride by standard methodologies. Ecotoxicity assays were performed in leachates and estuarine and pore waters using Artemia franciscana and Brachionus plicatillis. Aliquots of the leachates were evaporated to complete dryness (23–25 °C) and crystals analyzed by X-ray powder diffraction (XRD).

Results and discussion

Sediment with pH?=?8 and high EC and C_org was contaminated with As, Cd, Cr, Cu, Pb, and Zn. The element concentrations in the available fraction of the sediment were low compared to the sediment total concentrations (<1 % for Rhizo extraction). The concentrations of potentially hazardous elements in the estuarine water were relatively low, except for Cd. Concentrations of hazardous elements in the leachates were very low. Calcium, K, Mg, Na, and chloride concentrations were high but did not vary significantly among the four leaching experiments. Total concentrations of carbonate were much higher in leachates than in estuarine water. Both estuarine water and leachates showed negligible toxicity. Crystals identified in the solids obtained from the leachates by evaporation were halite, anhydrite, epsomite, dolomite, and polyhalite.

Conclusions

The sediment showed the capacity to retain the majority of the potentially hazardous chemical elements. Remobilization of chemical elements from sediment by leaching was essentially negligible. The variation of total concentrations of Ca, carbonate, and sulfate in leachates indicates that the sediment contained reactive sulfides. Due to its composition, the sediment seems to be a dynamic system of pollution control, which should not be disturbed.

     

Macronutrient accumulation in wheat crop (Triticum aestivum L.) with Azospirillum brasilense associated with nitrogen doses and sources

Abstract

New studies are needed to optimize the nitrogen (N) amount that can be applied to utilize the Azospirillum brasilense benefits. In addition, information regarding the interaction between the urease inhibitor and biological nitrogen fixation (BNF) and how they affect the macronutrients accumulation are also needed. We evaluate the effect of N sources and doses associated with A. brasilense regarding the macronutrients accumulation in straw and grains and wheat grain yield in tropical conditions. A randomized block experimental design was used with four replications in a 2?×?5?×?2 factorial arrangement as follows: two N sources (urea and urea with urease enzyme inhibitor NBPT; five N doses (0, 50, 100, 150, and 200?kg ha^?1) applied in topdressing; with and without A. brasilense inoculation. We found that an increase in N doses positively influenced the accumulation of macronutrients in straw and grains and the wheat grain yield. N sources have similar effects. Inoculation with A. brasilense increased accumulation of Mg and S in straw and P, Ca, and Mg in grains, regardless of the N dose. The inoculation with A. brasilense associated with 140?kg ha^?1 of N increased wheat grain yield. The inoculation can contribute in a more sustainable way to wheat nutrition and optimizing N fertilization.     

Changes in broccoli (Brassica oleracea L. Var. italica) health-promoting compounds with inflorescence development

Changes in phenolic compounds, total glucosinolates, and vitamin C were monitored during the productive period along five inflorescence development stages of three broccoli commercial cultivars (Marathon, Monterrey, and Vencedor). In an attempt to identify differences due to agronomic factors, broccoli cultivars were grown under different sulfur fertilization with poor (15 kg/ha) and rich (150 kg/ha) rates. Phenolic compounds and vitamin C concentrations showed, in all broccoli cultivars, a rising trend from the first stage until the over-maturity stage, both for rich and poor sulfur fertilization. Significant differences were detected in the first two stages between rich and poor sulfur fertilization in total glucosinolates for all broccoli cultivars, where the highest concentration was always observed in the second development stage (used as minimally processed product) during poor fertilization. With regard to the last three stages, the glucosinolate concentration in the poor sulfur fertilization started to slope down until the over-maturity stage. Where rich sulfur fertilization is concerned, the highest level was reached during the third stage (used as minimally processed product also), and after that, glucosinolate concentration decreased until the fifth stage.     

In vitro determination of the indigestible fraction in foods: an alternative to dietary fiber analysis

Dietary fiber (DF) intakes in Western countries only accounts for about one-third of the substrates required for colonic bacterial cell turnover. There is a general trend among nutritionists to extend the DF concept to include all food constituents reaching the colon. In this line, a method to quantify the major nondigestible components in plant foods, namely, the indigestible fraction (IF), is presented. Analytical conditions for IF determination are close to physiological. Samples, analyzed as eaten, were successively incubated with pepsin and alpha-amylase; after centrifugation and dialysis, insoluble and soluble IFs were obtained. IF values include DF, resistant starch, resistant protein, and other associated compounds. IF contents determined in common foods (cereals, legumes, vegetables, and fruits) were higher than DF contents. Calculated IF intakes were close to the estimated amount of substrates reaching the colon. IF data could be more useful than DF data from a nutritional point of view; therefore, IF is proposed as an alternative to DF for food labeling and food composition tables.     

Rapid determination of polyphenols and vitamin C in plant-derived products

Polyphenols, widely spread in our diet by the consumption of plant food products, are commonly determined using Folin-Ciocalteu reagent that interacts with other different reducing nonphenolic substances and leads to an overestimation of polyphenol content. In this paper we report an optimized Folin-Ciocalteu method to specifically determine the contents of total polyphenols and vitamin C. After the optimal conditions for the colorimetric assay were set, solid-phase extraction (Oasis HLB (hydrophilic-lipophilic balance)) was carried out to eliminate the water-soluble reducing interferences including vitamin C. Colorimetric correction was thus performed by subtracting interfering substances contained in the water washing extract from the raw extract. Moreover, vitamin C present in the water washing extract can be destroyed by heating and thus colorimetrically deduced. This procedure was set up with synthetic solutions and validated on different extracts from fruit products.     

In vitro activity of the essential oil of Cinnamomum zeylanicum and eugenol in peroxynitrite-induced oxidative processes

The essential oil obtained from the bark of Cinnamomum zeylanicum Blume (Lauraceae) and three of its main components, eugenol, (E)-cinnamaldehyde, and linalool (representing 82.5% of the total composition), were tested in two in vitro models of peroxynitrite-induced nitration and lipid peroxidation. The essential oil and eugenol showed very powerful activities, decreasing 3-nitrotyrosine formation with IC50 values of 18.4 microg/mL and 46.7 microM, respectively (reference compound, ascorbic acid, 71.3 microg/mL and 405.0 microM) and also inhibiting the peroxynitrite-induced lipid peroxidation showing an IC50 of 2.0 microg/mL and 13.1 microM, respectively, against 59.0 microg/mL (235.5 microM) of the reference compound Trolox. On the contrary, (E)-cinnamaldehyde and linalool were completely inactive.     

Characterization and quantitation of phenolic compounds in new apricot (Prunus armeniaca L.) varieties

Thirty-seven apricot varieties, including four new releases (Rojo Pasión, Murciana, Selene, and Dorada) obtained from different crosses between apricot varieties and three traditional Spanish cultivars (Currot, Mauricio, and Búlida), were separated according to flesh color into four groups: white, yellow, light orange, and orange (mean hue angles in flesh were 88.1, 85.0, 77.6, and 72.4, respectively). Four phenolic compound groups, procyanidins, hydroxycinnamic acid derivatives, flavonols, and anthocyanins, were identified by HPLC-MS/MS and individually quantified using HPLC-DAD. Chlorogenic and neochlorogenic acids, procyanidins B1, B2, and B4, and some procyanidin trimers, quercetin 3-rutinoside, kaempferol 3-rhamnosyl-hexoside and quercetin 3-acetyl-hexoside, cyanidin 3-rutinoside, and 3-glucoside, were detected and quantified in the skin and flesh of the different cultivars. The total phenolics content, quantified as the addition of the individual compounds quantified by HPLC, ranged between 32.6 and 160.0 mg 100 g(-1) of edible tissue. No correlation between the flesh color and the phenolic content of the different cultivars was observed.     

Occurrence and distribution of organochlorine pesticides (OCPs) in tomato (Lycopersicon esculentum) crops from organic production

Organochlorine pesticides (OCPs) were quantified by GC-ECD in tomato (Lycopersicon esculentum) during a vegetation period. Plants were harvested at 15, 60, and 151 days after seed germination. Leaves, stem, roots, and fruit (peel and flesh) were analyzed separately. The results showed that tomato plants were able to accumulate OCPs from soils, and a trend to reach the equilibrium among tissues at mature stages was also observed. Endosulfans comprised the main OCP group, probably due to its spray during summer months in the surrounding areas. Banned pesticides such as DDTs, heptachlor, and dieldrin were found. OCPs levels in the fruit were below the maximum residues limits (MRL) considered by the Codex Alimentarius. DDE/DDT and alpha-/gamma-HCH ratios of <1 would indicate recent inputs of DDT and lindane in the environment. The occurrence of OCPs in the study farm, where agrochemicals have never been used, is a result of atmospheric deposition of those pesticides.     

Chemometric studies of vinegars from different raw materials and processes of production

The phenolic composition, aroma compounds, and organic acid content of 83 vinegars have been determined. Multivariate analysis techniques have been used to classify these vinegar samples according to raw material (white wine, red wine, apple, honey, alcohol, balsamic, and malt) and production process (with and without aging in wood). Cluster analysis grouped the samples according to production process. Only apple and balsamic vinegars were separated from wine vinegars. Alcohol, honey, and malt vinegars were grouped with no aged wine vinegars. Linear discriminate analysis allowed a 88% differentiation according to raw material and 100% according to aging in wood. Besides, from the results obtained, a major role of the volatile compounds in the differentiation of the vinegar samples according to their aging period in wood can be seen.