桑树赤锈病的发生与防治

调查广西宜州市桑树赤锈病发生状况,分析桑树赤锈病发生特点及规律,针对宜州市桑树赤锈病大面积发生状况,提出有效地防治措施。     

小微企业税务风险及防范研究——以XDN企业为例

小微企业在我国发展迅速,在促进经济增长、增加就业与社会稳定等方面起着重要作用。然而,在现实的经济环境中小微企业面临重重风险。其中,税务风险是最主要风险之一。因此,降低小微企业税务风险,提高税务风险防范能力迫在眉睫。该项研究以XDN企业为例,结合企业会计准则与国家税法、政策变化,采用案例分析、逻辑推理等方法,对其税务风险现状及原因进行分析,并从内部控制角度提出具体防范策略。     

基于总分馆制的县—乡（村）图书馆服务网络构建

介绍了当前我国基层公共图书馆的发展状况,提出了构建基于总分馆制的县—乡（村）图书馆服务网络的构思,并对构建服务网络中的一些问题给出自己的思考。     

新型莫西菌素浇泼剂对羊蜱蝇和消化道线虫驱虫药效评价

试验旨在通过新型莫西菌素（moxidectin,MOX）浇泼剂对羊的驱虫试验,评价MOX浇泼剂对羊蜱蝇和消化道线虫的临床药效。将150只阿勒泰羊经产母羊随机分为6组,每组25只,分别为不用药对照组、螨净药浴组、MOX注射组和MOX低（0.05 mL/（kg·BW））、中（0.1 mL/（kg·BW））和高（0.2 mL/（kg·BW））剂量浇泼组,试验期为1周。试验第1天按前述分组中方法和剂量驱虫1次。观察受试动物临床表现,测定给药前1天和给药后第7天体温、脉搏和呼吸（TPR）,血液生理、生化和尿常规指标;测定羊蜱蝇减虫率、治愈率。采取粪样测定消化道线虫每克粪中虫卵个数（EPG）减少率及转阴率。结果显示,与不用药对照组相比,给药后第7天各驱虫组TPR、血液生理、生化及尿常规指标均无显著差异（P>0.05）。螨净药浴组羊蜱蝇减虫率为43.7%,而MOX注射组及MOX低、中、高剂量浇泼组均为100%。螨净药浴组治愈率为13.0%,而MOX注射组及MOX低、中、高剂量浇泼组均为100%;与不用药对照组相比,螨净药浴组消化道线虫卵减少率为0,而MOX注射组及MOX低、中、高剂量浇泼组分别为91.6%、93.1%、94.9%和97.8%。螨净药浴组虫卵转阴率为0,而MOX注射组及MOX低、中、高剂量浇泼组分别为77.0%、69.2%、69.2%和84.6%。本试验结果表明,新型MOX浇泼剂对体外寄生虫和消化道线虫均有显著疗效,且优于螨净药浴,与MOX注射剂等效。实践应用中最适MOX浇泼剂量推荐为0.05 mL/（kg·BW）（即0.25 mg/（kg·BW））。     

Effects of different dl‐selenomethionine and sodium selenite levels on growth performance,immune functions and serum thyroid hormones concentrations in broilers

This trial was conducted in a 2 × 3 + 1 factorial arrangement based on a completely randomized design to evaluate the effects of different dl ‐selenomethionine (dl ‐Se‐Met) and sodium selenite (SS) levels on growth performance, immune functions and serum thyroid hormones concentrations in broilers. A total of 840 Ross 308 broilers (7 days old) were allocated by body weight to seven treatments (three replicates of 40 birds each treatment) including (1) basal diet (containing 0.04 mg of selenium (Se)/kg; control) without supplementary Se; (2, 3 and 4) basal diet + 0.05, 0.15 or 0.25 mg/kg Se as SS; (5, 6 and 7) basal diet + 0.05, 0.15 or 0.25 mg/kg Se as dl ‐Se‐Met. The experiment lasted 42 days. The results revealed that dietary Se supplementation improved (p < 0.05) average daily gain, feed efficiency, immune organ index, serum immunoglobulin A (IgA), immunoglobulin G (IgG), immunoglobulin M (IgM) and triiodothyronine (T₃) concentrations and decreased (p < 0.01) thyroxine (T₄)/T₃ ratio in serum compared with the control. Broilers receiving the dl ‐Se‐Met‐supplemented diets had higher (p < 0.05) feed efficiency, thymus index, the amounts of IgA, IgG, IgM and T₃ as well as lower (p < 0.05) serum T₄ concentrations and T₄/T₃ ratio than those consuming the SS‐supplemented diets. Serum IgA and IgM levels of broilers fed 0.15 mg Se/kg were significantly higher (p < 0.05) than those of broilers fed 0.05 or 0.25 mg Se/kg. In summary, we concluded that dl ‐Se‐Met is more effective than SS in increasing immunity and promoting conversion of T₄ to T₃, thus providing an effective way to improve the growth performance of broilers. Besides, based on a consideration of all experiment indices, 0.15 mg Se/kg was suggested to be the optimal level of Se supplementation under the conditions of this study.     

新麦草遗传多样性等位酶分析

采用不连续系统的聚丙烯酰胺垂直板凝胶电泳(VPAGE)对新疆新麦草的5个天然居群和1个栽培种遗传多样性和居群结构进行了分析.测定的6个酶系统中,确定了9个等位酶位点,多态位点百分率平均值为90.48%,平均等位基因数为2.920 7,平均预期杂合值为0.542 7.总的基因多样性中,86%存在于居群内,14%来自居群间.聚类分析以遗传距离D=0.14为分界线将6份材料明显地分为2组.研究表明,新麦草具有丰富的遗传多样性,其多样性可能与生境、人工驯化、风媒异交等因素有关.     

两种沉水植物在不同水深和生长时期对入侵植物的响应

为研究沉水植物在不同水深和生长时期对不同种类入侵植物的响应,选取2种湿地入侵植物凤眼莲Eichhornia crassipes、水盾草Cabomba caroliniana和2种常见本地沉水植物黑藻Hydrillaverticillata、菹草Potamogeton crispus为研究对象,通过模拟试验探究在不同水深（0.2、0.4 m）和生长时期（生长初期和生长旺期）的本地沉水植物对2种入侵植物的响应。结果显示,当水深为0.4 m时更有利于黑藻的生长,并可削弱入侵植物对黑藻生长的消极作用,而水深对菹草的生长无显著影响;入侵植物种类对本地沉水植物的生长无显著影响,但影响方式却存在差异,其中水盾草倾向于直接抑制本地沉水植物的生长,而凤眼莲可以通过降低水体透明度以及总磷含量进而间接抑制本地沉水植物的生长。此外,外来植物在本地沉水植物生长初期入侵对本地沉水植物产生的消极影响较生长旺期入侵时更显著。表明凤眼莲及水盾草入侵对本地沉水植物生长的影响机制存在差异,本地沉水植物在适宜水深和生长旺期对2种入侵植物具有更强的抵抗能力。     

Physical simulation of fluid field and structure optimization in two-strand tundish

The influence of the structure and location of dam and weir on fluid flow state in a two-strand tundish is studied, and a set of optimal structure, combining with the average residence time calculated from RTD curve, is obtained. The result indicates that the fluid flow state can be changed and the path of the fluid flow can be prolonged as well as the average residence time is improved after using dam and weir. But there are some dead zones after fluid passed through the dam and weir. Combination scheme of No. one dam and weir is better than the others. Its average residence time is 299 s and the volume fraction of dead zone is 31.0%. After the optimization of flowing control parameters in tundish, the best case is that the distance between dam and weir is 290 mm and the distance between weir and the long nozzle is 383 mm. The longest average residence time is 351 s and the minimum volume fraction of dead zone is 19.0% under the above situation. Compared with that of no dam and weir, the average residence time increases by 65 s and the dead zone volume fraction decreases by 15.0%. Based on Newton formula, the calculated results show that the inclusions with diameter larger than 17.5 μm can float up within 351 s under this optimization situation.     

The Software System for Computation and Drawing of Ship Properties

The softwa re system suggested in this paper is applied to replace the traditionalhanded-computation forms. It uses the cubic sample interpolation and numerical integral,and is writ-ten with FORTRAN according to the accurate formula. With this software system,the nine sorts ofcomputation results of ship properties can be obtained. The system is con nected through SCR filewith AutoCAD,and ean draw automatically eleven sorts of pictures according to the computation re-sults.     

Friction and Wear Characteristics of Plastic Alloy Bearings under Different Lubricating Condition

Ultra High Molecular Weight Polyethylene (UHMW-PE) is a kind of high anti-wear engineering plastic with many excellent physical and mechanical performances. It has been widely applied in the field of mechanism such as bearing and pump. Effect of load, speed, time on friction and wear properties of Ultra High Molecular Weight Polyethylene(UHMW-PE)plastic alloy bearings under different Lubricating Condition are studied by using MPV-200 model friction and wear testing machine. The test results show that water lubrication reduces the friction coefficient of bearings but increases the wear rate as compared with dry friction. At the same time, wear mechanisms are analyzed systemically. It provides a theoretic basic for practical application of plastic alloy bearings