Comparative evaluation of MCP gene in worldwide strains of Megalocytivirus (Iridoviridae family) for early diagnostic marker

Members of the Iridoviridae family have been considered as aetiological agents of iridovirus diseases, causing fish mortalities and economic losses all over the world. Virus identification based on candidate gene sequencing is faster, more accurate and more reliable than other traditional phenotype methodologies. Iridoviridae viruses are covered by a protein shell (capsid) encoded by the important candidate gene, major capsid protein (MCP). In this study, we investigated the potential of the MCP gene for use in the diagnosis and identification of infections caused Megalocytivirus of the Iridoviridae family. We selected data of 66 Iridoviridae family isolates (53 strains of Megalocytivirus, eight strains of iridoviruses and five strains of Ranavirus) infecting various species of fish distributed all over the world. A total of 53 strains of Megalocytivirus were used for designing the complete primer sets for identifying the most hypervariable region of the MCP gene. Further, our in silico analysis of 102 sequences of related and unrelated viruses reconfirms that primer sets could identify strains more specifically and offers a useful and fast alternative for routine clinical laboratory testing. Our findings suggest that phenotype observation along with diagnosis using universal primer sets can help detect infection or carriers at an early stage.     

Liquid handling properties of hollow viscose rayon/super absorbent fibers nonwovens for reusable incontinence products

To develop reusable incontinence products, blend nonwovens of hollow viscose rayon (HVR) and super absorbent fibers (SAFs) were prepared using a needle-punching process and their liquid handling properties, such as the fluid absorption capacity, fluid retention capacity, fluid absorption under load, moisture evaporation rate, and repeated water absorption were investigated. As the SAF content in the HVR/SAF blend nonwovens was increased, the fluid absorption capacity, fluid retention capacity, and fluid absorption under load increased, whereas the moisture evaporation rate decreased. SAF had a more significant effect on fluid retention than fluid absorption. In the case of HVR/SAF(8/2) and HVR/SAF(7/3), more than 100 % of the fluid absorption capacity was retained even after 5 cycles of repeated water absorption tests. Overall, the HVR/SAF blend nonwovens are good candidates for reusable incontinence products.     

QTL mapping for capsaicin and dihydrocapsaicin content in a population of Capsicum annuum ‘NB1’ × Capsicum chinense ‘Bhut Jolokia’

Capsaicinoids are pungent compounds used for industrial and medical purposes including food, medicine and cosmetics. The Indian local variety ‘Bhut Jolokia’ (Capsicum chinense Jacq.) is one of the world's hottest chilli peppers. It produces more than one million Scoville heat units (SHUs) in total capsaicinoids. In this study, our goal was to identify quantitative trait loci (QTLs) responsible for the high content of capsaicin and dihydrocapsaicin in ‘Bhut Jolokia’. Capsicum annuum ‘NB1’, a Korean pepper inbred line containing 14 000 SHUs, was used as a maternal line. An F₂ population derived by crossing between ‘NB1’ and ‘Bhut Jolokia’ was generated to map QTLs for capsaicinoids content. A total of 234 markers, including 201 HRM, 21 SSR, 2 CAPS and 10 gene‐based markers of the capsaicinoid synthesis pathway, were mapped. The final map covered a total distance of 1175.2 cM and contained 12 linkage groups corresponding to the basic chromosome number of chilli pepper. Capsaicin and dihydrocapsaicin content were analysed in 175 F₂ pepper fruits using the HPLC method. The maximum total capsaicinoids content was 1389 mg per 100g DW (dry weight), and the minimum content was 11 mg per 100g DW. Two QTLs (qcap3.1 and qcap6.1) for capsaicin content were identified on LG3 and LG6, and two QTLs (qhdc2.1 and qdhc2.2) for dihydrocapsaicin content were located on LG2. We did not detect QTLs for total capsaicinoids content. The QTL positions for capsaicin content were different from those for dihydrocapsaicin content. These results indicate that the complexity of selecting for more pungent chilli peppers must be considered in a chilli pepper breeding programme. The QTL‐linked markers identified here will be helpful to develop more pungent pepper varieties from ‘Bhut Jolokia’, a very hot pepper.     

Lysine restriction and realimentation affected growth,blood profiles and expression of genes related to protein and fat metabolism in weaned pigs

To investigate the effects of lysine restriction and subsequent realimentation on growth performance, blood profiles and gene expression of leptin and myostatin, 128 weaned pigs [initial body weight (BW) 6.96 ± 1.07 kg, 26 ± 2 days of age] were randomly allotted to four treatments. The starter diets during the first 2 weeks (P1) contained 100%, 80%, 70% or 60% of recommended lysine levels ( National Research Council, 1998 ). Then, common grower 1 and 2 diets were offered for 2 weeks (P2 and P3) each. During P1, average daily gain (ADG) was linearly reduced (p < 0.05) with the increasing levels of lysine restriction. Growth rate was greater in pigs previously fed lysine‐restricted diets than well‐fed pigs although it did not reach a significant level during realimentation. However, the final BW and overall ADG were the lowest (p < 0.05) and F/G was poor in pigs fed 60% lysine diet. Relative visceral organ weights and composition of skeletal muscle were similar (p > 0.05) among the treatment. Blood triglyceride and glucose levels were increased (p < 0.05) during P1, while blood urine nitrogen, total protein and albumin levels were decreased (p < 0.05) during P2 with the reduction in dietary lysine levels. The abundance of myostatin mRNA in skeletal muscle and leptin mRNA in subcutaneous adipose tissue were lower (p < 0.05) in lysine‐restricted pigs than in pigs fed non‐restricted diets. In conclusion, 80% and 70% lysine restriction of starter diets resulted in inferior growth and compensatory growth effect was noted during realimentation, while 60% lysine restriction had a negative influence on growth performance. Moreover, the changes in myostatin and leptin mRNA abundance caused by nutritional manipulations may be involved in the regulation of protein and fat deposition in young pigs.     

Topical tacrolimus (FK506) for the treatment of feline idiopathic facial dermatitis

A 3-year-old, neutered male Persian cat with chronic ulcerative facial dermatitis was diagnosed with feline idiopathic facial dermatitis based on signalment, clinical history and diagnostic test results, including dermatohistopathological evaluation. Initial treatment started with 4 weeks of oral antifungal/antibiotic medication for severe secondary infectious dermatitis of Malassezia and bacteria. As the lesions gradually improved, the oral medication was withdrawn, leaving only 0.1% topical FK506 (tacrolimus) ointment for the remaining lesions. Topical treatment was administered just in case any new lesions developed. The patient has been managed effectively with topical tacrolimus and no side-effects were observed during treatment. Feline idiopathic facial dermatitis is known as a difficult dermatosis to manage successfully, but our experience suggests that it may respond to topical tacrolimus.     

Anti-obesity activity of diglyceride containing conjugated linoleic acid in C57BL/6J ob/ob mice

This study was to investigate the anti-obesity effects of diglyceride (DG)-conjugated linoleic acid (CLA) containing 22% CLA as fatty acids in C57BL/6J ob/ob male mice. There were four experimental groups including vehicle control, DG, CLA, and DG-CLA. The test solutions of 750 mg/kg dose were orally administered to the mice everyday for 5 weeks. CLA treatments significantly decreased mean body weight in the obese mice throughout the experimental period compared to the control (p < 0.01). All test solutions significantly decreased the levels of triglyceride, glucose and free fatty acids in the serum compared with control (p < 0.05). The levels of total cholesterol were also significantly reduced in DG and DG-CLA groups compared with the control group (p < 0.05). CLA significantly decreased weights of renal and epididymal fats compared with the control (p < 0.05). DG and DG-CLA also significantly decreased the epididymal fat weights compared with the control (p < 0.05). A remarkable decrease in the number of lipid droplets and fat globules was observed in the livers of mice treated with DG, CLA, and DG-CLA compared to control. Treatments of DG and CLA actually increased the expression of peroxisome proliferator-activated receptor gamma. These results suggest that DG-CLA containing 22% CLA have a respectable anti-obesity effect by controlling serum lipids and fat metabolism.     

An outbreak of fatal hemorrhagic pneumonia caused by Streptococcus equi subsp. zooepidemicus in shelter dogs

An outbreak of fatal hemorrhagic pneumonia with 70~90% morbidity and 50% mortality occurred in an animal shelter in Yangju, Gyeonggi Province, Korea. Clinically, the affected dogs showed severe respiratory distress within 48 h after arriving in the shelter. The dead were found mainly with nasal bleeding and hematemesis. At necropsy, hemothorax and hemorrhagic pneumonia along with severe pulmonary consolidation was observed, though histopathological analysis showed mainly hemorrhagic bronchopneumonia. Lymphoid depletion was inconsistently seen in the spleen, tonsil and bronchial lymph node. Gram-positive colonies were shown in blood vessels or parenchyma of cerebrum, lung, liver, spleen, and kidney. Also, Streptococcus (S.) equi subsp. zooepidemicus was isolated from the various organs in which the bacterium was microscopically and histologically detected. In addition, approximately 0.9 Kb specific amplicon, antiphagocytic factor H binding protein, was amplified in the bacterial isolates. In this study, we reported an outbreak of canine hemorrhagic bronchopneumonia caused by S. equi subsp. zooepidemicus in an animal shelter in Yangju, Korea.     

Film preparation by melt- or compression-process using poly(vinyl chloride) powder swollen with dimethylformamide

A melt-process was used to prepare high molecular weight Poly(vinyl chloride) (PVC) films without the use of a conventional plasticizer and heat stabilizer. Rigid PVC powder was swollen with dimethylformamide containing 4∼10 vol% water to reduce its melting temperature. The swollen powder was pressed at a relatively low temperature of 75∼125 °C to form a film shape, and then washed and dried. The visible light transmittance, X-ray diffraction, density and the tensile properties of the resulting films were examined to estimate the success or failure of film formation. The films could be produced by not only the melt-process but also a compression-process using the rigid, highly swollen PVC powder. The resulting films had no voids, which are generally observed in PVC products formed by a solution process. The minimum temperature for these processes decreased with decreasing water content in the mixture: The minimum temperatures according to the water content in the mixture to produce faultless films through the melt-process were 4 %–105 °C, 6 %–115 °C, 8 and 10 %–125 °C, while those through the compression process were 4 %–95 °C, 6 and 8 %–105 °C, 10 %–115 °C.     

Preparation and characterization of carboxymethyl cellulose nonwovens by a wet-laid process

In this study, micro-porous carboxymethyl cellulose (CMC) nonwovens were prepared by carboxymethylation of cellulose nonwovens produced by a wet-laid process and their properties were investigated for potential applications as adhesion prevention barriers. After carboxymethylation, the thickness and mean pore size of the cellulose nonwovens were increased, whereas their pore size distribution became narrower. Tensile strength of cellulose nonwovens was proportional to basis weight, and dramatically increased after carboxymethylation. CMC nonwovens immediately absorbed a phosphate buffered saline solution and showed swollen phase within 1 min. It was found that the thickness and pore size distribution of CMC nonwovens could be easily controlled by the wet-laid process. It is expected that the CMC nonwovens can be used as adhesion prevention barriers.     

Multiple segmented reaches per subwatershed modeling approach for improving HSPF-Paddy water quality simulation

Reach segmentation influences predicted water quality concentrations in water quality modeling. Many lumped or semi-distributed watershed models, including Soil and Water Assessment Tool (SWAT) and Hydrologic Simulation Program-Fortran (HSPF), simulate stream/river water quality with a single segmented reach per subwatershed (SSRS) modeling approach. A multiple-segmented reaches per subwatershed (MSRS) modeling approach was developed, and simulated BOD₅ concentrations for this approach were compared with results from the SSRS modeling approach using the HSPF-Paddy model. The SSRS modeling approach has potential systemic errors for predicting BOD₅ concentration even when the model is well calibrated. When the point source was loaded at the most upstream location with the same decay rate, the predicted BOD₅ concentration using the SSRS modeling approach was higher compared with results for the MSRS modeling approach, and the difference between two methods increases with increasing load and decay rate. When BOD₅ was loaded more downstream, BOD₅ concentration using the SSRS modeling approach was lower compared with results for MSRS modeling. For a case study, simulated streamflow and BOD₅ concentration for the SSRS and MSRS modeling approaches demonstrated good agreement with observed data. However, the estimated decay rate for the SSRS modeling approach was smaller than that for the MSRS modeling approach because BOD decays through total volume in the SSRS modeling approach, although BOD may be loaded anywhere in the reach. The MSRS modeling approach can minimize systematic errors and provide more detailed variation of water quality concentrations along a river length. The MSRS modeling approach does not always need to be applied to all subwatersheds but is recommended for reaches significantly polluted by point source pollution.