不同种植密度对高粱生长、产量及养分吸收的影响

为了明确密度与高粱[Sorghum bicolor (L.) Moench]农艺和经济性状以及养分吸收的关系,以‘晋杂23号’高粱为试验作物,采用大田试验方法,试验设4.5万株/hm2、7.5万株/hm2、10.5万株/hm2和13.5万株/hm2 4个种植密度,研究了不同种植密度对高粱生长、产量、产量构成因素以及养分吸收的影响。结果表明,随着密度增加,高粱株高显著增高,茎粗显著变细,单株叶面积和单株干重显著下降。在4.5万株/hm2~7.5万株/hm2范围内,籽粒产量随着密度增加呈显著性增加。密度在4.5万株/hm2~10.5万株/hm2时,单位面积穗数随密度增加呈显著性增加。随着密度增加,穗粒数显著性增加,而千粒重影响不显著。除磷以外,密度对高粱氮和钾吸收总量均无显著影响。密度对籽粒氮吸收量没有显著影响;在10.5万株/hm2~13.5万株/hm2范围内,磷和钾吸收量明显下降。与氮和磷不同,钾主要分配在秸秆中,只有少量钾转运到籽粒中。相关分析表明,种植密度与株高、生物产量、籽粒产量和单位面积穗数呈显著性正相关,而与茎粗、单株叶面积、单株干重、经济系数、穗粒数和千粒重呈显著性负相关。本研究表明,种植密度与高粱主要农艺和经济性状以及养分吸收息息相关,在高粱高产高效栽培中起着非常重要的作用。     

储藏物冷却机在高温高湿区高大平房仓的应用

选用功率较小的储藏物冷却机与负压通风相结合,对福建漳州地区的粮面压盖稻谷仓进行降温冷却,通过改变粮面压盖方式实现冷却的均匀性和彻底性.累计运行时间112.7 h,降温3.3℃,水分变化为0.1％,达到了保水降温的效果.运行期间的降温单位能耗为0.47 kW·h/℃·t,符合《谷物冷却机低温储粮技术规程》的规定,结束降温后粮面压盖延缓了粮温复温.     

Cotton Chemical Topping by Applying DPC in Different Cotton-Growing Regions

[Objective] The objective of this study was to investigate the stability and universality of cotton chemical topping by applying mepiquat chloride (1,1-dimethyl-piperidinium chloride, DPC) in different cotton-growing regions. [Method] Field experiments were conducted in 2018 at 10 locations in the Yellow River basin (Hejian and Handan, Hebei province; Dezhou and Wudi, Shandong province), the Yangtze River basin (Dafeng, Jiangsu province; Huanggang, Hubei province), and Xinjiang area (Shihezi location I and loacation II, northern Xinjiang and Luntai and Shaya, southern Xinjiang). Local cultivars/lines were used, and the experiments were performed using a randomized complete block design with three or four replicates. Accompanied with typical DPC multi-application in each location, chemical topping was conducted at 10 days before manual topping (T1) or at the same time with manual topping (T2) by applying four dosages of DPC (0, 90, 180, 270 g·hm^－2), manual topping was used as the first control and non-topping as the second control. [Result] The time of chemical topping significantly affected cotton plant height (except for the results in Handan, Dezhou and Wudi) and the number of fruit branches (except for the results in Dafeng and Huanggang). It was observed that earlier chemical topping would result in lower cotton plant height and a fewer fruit branches. In Hejian and Shihezi location I, the average plant height across DPC chemical topping at T1 stage was not only lower than that of T2 stage but also 3.3 cm and 4.6 cm lower than that of manual topping, respectively. In most locations, chemical topping at T1 stage increased around two fruit branches per plant compared with manual topping, while in T2 stage the increased fruit branches per plant ranged from 2.3 to 7.7. Also, we found that a higher dosage of DPC resulted in shorter plant height (except for that in Huanggang). In some locations, plant heights of chemical topping with 180 g·hm^－2 or 270 g·hm^－2 DPC were even shorter than that of manual topping. The number of fruit branches per plant of 0 g·hm^－2 DPC increased by 2.4-8.3 compared with manual topping. However, chemical topping with 90-270 g·hm^－2 DPC significantly reduced the number of fruit branches compared with 0 g·hm^－2 DPC. There were no significant differences in the number of fruit branches among three DPC dosages (90, 180, and 270 g·hm^－2). In Handan, seed cotton yield of chemical topping at T2 stage was significantly lower than that of manual topping due to the decreased boll number, which is possibly associated with the high temperature and drought weather after chemical topping. While at other locations, most treatments of chemical topping by using DPC did not produce significant effects on yield. In addition, chemical topping by using DPC did not delay cotton maturity, characterized by their similar boll-opening rate and the first harvest rate to those of manual topping before spraying harvest aids. [Conclusion] Cotton chemical topping with DPC is more stable and universal across different cotton-growing regions. We suggest that 90-180 g·hm^－2 DPC could be used at the same time with manual topping for cotton chemical topping.     

亚洲棉EST-SNP的挖掘及其在陆地棉中的验证

【目的】随着不同棉种序列数据库的逐步完善以及高通量测序技术的发展,棉花单核苷酸多态性(Single nucleotide polymorphism,SNP)标记开发可利用的公共数据资源逐步增加。【方法】本研究基于陆地棉祖先基因组的现代种亚洲棉表达序列标签(Expressed sequence tag,EST)数据库,利用CAP3对亚洲棉EST数据库进行拼接。拼接获得7 187个重叠群(Contig),再利用Quality SNP软件进行SNP位点分析。【结果】在807条含有4条以上EST序列的Contig中查找到2 690个SNP位点。通过筛选次要等位基因频率大于30%的位点,获得953个可靠度较高的候选SNP,通过电子筛选,最终获得可用于陆地棉分析的SNP 149个,利用位点特异性聚合酶链式反应以及酶切扩增多态序列验证了EST-SNP的准确性。【结论】本研究证实基于亚洲棉EST数据库挖掘用于陆地棉研究的EST-SNP切实可行,并有望将EST-SNP用于陆地棉遗传图谱构建、重要性状的基因定位以及分子标记辅助育种。     

农杆菌介导高粱遗传转化的相关因素优化

为建立一个稳定的高粱遗传转化体系,以高粱RHMC品种为试验材料,采用内含有P ^CAMBIA3301质粒载体的根癌农杆菌EHA105介导的方法研究了高粱遗传转化的相关因素。结果表明,外植体预培养2d,GUS表达效果最好;在侵染液和共培养基中加入200μmol/L乙酰丁香酮时,GUS表达效果最好;侵染液浓度OD₆₀₀值的适宜范围为0.8~1.0;农杆菌侵染愈伤组织的适宜时间为5~10min;共培养的适宜时间为2d。初步建立了一套高粱遗传转化体系,为今后高粱转化提供一些参考。     

不同施肥方式对河北省小麦产量及肥料贡献率的影响

通过总结2006-2013年河北省测土配方项目田间示范数据,分析了配方施肥（PF）与农户常规施肥（RF）对小麦产量及肥料贡献率的影响,为明确当前生产条件下河北省小麦产区施肥效果及肥料的合理施用提供依据。结果表明：河北省小麦施肥后增产效果显著,其中RF处理增产40.8%,PF处理增产54.8%,并且PF较RF可节肥9.36%、节本8.37%。PF与RF的平均肥料贡献率分别为35.0%和28.9%,平均差值为6.1%,且二者的肥料贡献率均与不施肥处理产量（土壤供肥能力）呈显著线性负相关关系,2条线斜率相近,这说明不同施肥方式肥料贡献率与土壤供肥能力的响应效果相差不大。不施肥处理产量每提高1 000kg/hm ²,PF和RF的肥料贡献率分别降低8.4%和8.2%,PF的肥料贡献率整体较RF高7.2%。在河北省小麦生产中应大力推广配方施肥、平衡施肥,提高肥料贡献率,并且应提高基础地力,以减少对肥料的依赖,实现减肥增效。     

高密度对甘肃黄灌区玉米品种农艺性状和产量的影响

选择4个玉米品种,设置3种密度,于2015-2016年在甘肃中部沿黄灌区种植试验得出：同一品种在不同密度下的农艺性状和产量存在差异。对宁玉524、辽单588、高玉818、先玉335的各农艺性状和产量构成因素在密度9.75万、11.25万、12.75万株/hm ²处理下两年测得的数据均值进行了分析比较,发现随着种植密度的增大,玉米的农艺性状和产量出现趋向性变化。表现为玉米的空秆率、倒伏率、株高、穗位高和产量随着密度的增加而增加;茎粗、穗粗、穗长、穗粒数和百粒重随密度增加有所减小。其中空秆率、茎粗、穗粗、穗长、穗粒数和产量差异显著,高种植密度对他们有显著的影响。     

施氮量对不同水稻品种氮肥利用率与农艺性状的影响

为探明施氮量对不同水稻品种产量、氮肥利用率和农艺性状的影响,以适合江苏省种植的12个中粳稻（含籼/粳杂交稻）品种为材料,大田种植,设置0N（全生育期不施氮）、200N（全生育期施纯氮200kg/hm ²）和360N（全生育期施纯氮360kg/hm²）3个施氮量处理,研究各品种产量、氮肥利用率和一些农艺性状的差异。结果表明：甬优2640在3个施氮水平产量均最高,库容量大是其高产的主要原因。其他品种产量对氮肥响应的表现不一。在较低氮（0N、200N）条件下,淮稻13号和武运粳30的产量较高,宁粳1号和扬粳4038的产量较低。在高氮（360N）条件下,宁粳1号和扬粳4038产量较高。在较低施氮量条件下,产量和氮肥利用率较高的品种具有较高的干物质积累量、茎蘖成穗率、叶面积指数、粒叶比及群体生长速率,这些指标可作为筛选氮高效品种的农艺性状指标。     

西南地区油菜品种根肿病抗性及布局分析

为明确西南地区主栽油菜品种根肿病抗性,以期为合理品种布局提供依据,降低根肿病的危害和损失。结合病圃根肿病菌生理小种鉴定,在四川安县、大邑、广汉三地区,采用病圃自然发病法,对80个油菜品种进行根肿病抗性评价,并对22个品种连续3年进行抗性跟踪。结果表明：三地区病圃根肿菌为存在基因型分化的4号生理小种;供试油菜品种中无免疫根肿病品种,安县、大邑、广汉三地感病品种分别占比88.75%、83.75%、87.50%,其中55个品种在三地区均表现感病,即不适宜在根肿病菌为4号生理小种区域种植;抗性跟踪评价显示不同品种的抗性稳定性存在差异。‘浙油50’、‘油罐罐’适宜安县地区种植,‘黄金荚’、‘金油858’、‘油研9号’、‘种都油998’和‘渝黄4号’适宜大邑地区种植,‘志远油8号’适宜广汉地区种植。‘绵丰油5号’、‘德名油1号’表现抗性丧失趋势;‘丰油精’、‘高油48’抗性不稳定;‘矮架早’抗性完全丧失。     

川西林盘植物群落结构历史变化特征分析——以成都市郫都区为例

林盘是川西平原地区一种极具特色的传统农村聚落形态,具有突出的农业文化遗产价值。植被是构成林盘的核心要素,了解植物群落的历史变化过程可以为传统林盘的保护工作提供科学依据。本研究首先通过查阅历史资料掌握传统林盘植物群落的结构特征,然后选取成都市郫都区4个林盘样地和3个灌渠边林地进行植物群落调查,从而比较不同时期林盘植物群落结构。调查结果显示,目前林盘植物群落结构发生的主要变化包括乔木层中的传统优势种杉木、楠木及柏树被黑壳楠取代,林盘植被趋向单一化;竹类的物种丰富度下降明显,竹林退化严重;灌渠林地中桤木及柏树被枫杨和构树取代,竹类基本消失。川西平原地区社会和经济的变迁破坏了传统农业系统中人口、耕地和林盘之间的平衡,从而导致了林盘植被群落结构的改变。