Spatial distribution pattern of attack of the oak borer,Platypus quercivorus (Murayama) (Coleoptera: Platypodidae), and scolytid ambrosia beetles (Coleoptera: Scolytidae) on fresh logs

The spatial distribution patterns of the attack on fresh logs ofPasania edulis was studied for the oak borer,Platypus quercivorus (Murayama), and two species of Scolytid ambrosia beetles,Xylosandrus crassiusculus (Motschulsky) andXyleborus attenuatus Blanford, in 1994 and 1995. On the logs where onlyP. quercivorus attacked, the entry holes were distributed uniformly when attack intensity was low. However, the distribution pattern became more aggregated with the increase in attack intensity. On logs where bothP. quercivorus and the two Scolytid species attacked, there was a negative association between the spatial distribution of the entry holes ofP. quercivorus and that of scolytids. Simultaneous attack of two scolytids also increased the degree of aggregation of the entry holes ofP. quercivorus. The entry holes of scolytids were distributed in groups irrespective of the attack intensity of scolytids andP. quercivorus. These results suggest an asymmetrical interspecific relationship betweenP. quercivorus and scolytids. Concentration of the entry holes ofP. quercivorus in a small area may cause a considerable decline in the reproductive success in the galleries constructed there.     

Spacing interval between principal tree windbreaks--Based on the relationship between windbreak structure and wind reduction

Relative windspeed reduction was measured behind nine relatively narrow, homogenous tree windbreaks with porosities between 0.13-0.33, and behind 28 combinations of model stubble barriers representing 25 different optical porosities (0.00-0.80). The optimum porosities observed were 0.25 and 0.13 for tree windbreaks and stubble barriers respectively. Based on the relationship between windbreak structure (optical porosity) and wind reduction, the chief indices for determining spacing interval, i.e., the windbreak structure index (δ) and the parameter of microclimate, represented by the problem wind (Lrp), were determined. Additionally, investigations on shelterbelt trees were carried out, and stem-analysis techniques were used, to develop a method for determining the mature height of tree windbreaks (H0). Optimal spacing intervals between windbreaks could be predicted from the indices of a given windbreak structure, percentage of reduction of windspeed desired and tree growth model. A hypothetical example for determining the spacing interval of principal poplar windbreaks is given at the end of this paper. The results can be applied not only to tree windbreak design but also to other plant materials and artificial barriers for wind protection.     

Polymorphism analysis of Fagaceae and DNA-based identification ofFagus species grown in Japan based on therbcL gene

Fagaceae species in Japan were identified by restriction fragment length polymorphism (RFLP) and sequence comparison of a region ofrbcL. Of nine restriction endonucleases used for digestion, three (MspI,RsaI,HaeIII) produced different restriction patterns in Fagaceae. Digestion byMspI yielded four patterns: Fagus species,Castanea crenata, Pasania glabra, and others. Digestion byRsaI andHaeIII afforded two patterns:Fagus species and others. These facts indicate thatCastanea crenata andPasania glabra can be identified byMspI restriction patterns ofrbcL. Sequence comparison of a region of therbcL gene among 20 species of Fagaceae showed that: (1) they could be divided into seven groups; (2) there is a site mutation betweenFagus crenata andF. japonica. The latter indicates that the wood of both Fagus species are identifiable at the species level, which is not the case using conventional methods. This result indicates the possibility of wood identification based on DNA polymorphism in Fagaceae at the intrageneric level.Part of this paper was presented at the 46th annual meeting of the Japan Wood Research Society, Kumamoto, April 3–5, 1996 and the 47th annual meeting of the Japan Wood Research Society, Kochi, April 3–5, 1997     

Chemical modification of wood by anhydrides without solvents or catalysts

Acetylated, propionylated, butyrylated, isobutyrylated, and hexanoylated woods were prepared at several temperatures. The reaction rate, dimensional stability, and changes in the ratios of specific gravity and dimensions in the tangential and radial directions were estimated. The reaction rate of propionylation was slow at temperatures under 90°C but increased with the temperature. The butyrylated, isobutyrylated, and hexanoylated woods showed little or no weight percent gain (WPG) and little or no antiswelling efficiency (ASE) below 110°C even for 24h, but they achieved significant WPG and ASE values at 140°C with a longer reaction time. The acetylated, propionylated, and butyrylated woods showed almost the same values for dimensional stabilization efficiency based on WPG (DSE). The specific gravity and dimensions ratios for acetylated, propionylated, and butyrylated woods compared to those of untreated wood increased with an increase in WPG.     

Absolute configuration of arylglycerol-β-aryl ethers obtained by asymmetric reduction of the correspondingα-ketonic compound with intactFusarium solani cells

When (±)--oxo-guaiacylglycerol--(vanillic acid) ether (1) is degraded byFusarium solani M-13-1, the-ketone is initially reduced to giveerythro andthreo guaiacylglycerol--(vanillic acid) ethers (2), arylglycerol--aryl ethers, both of which are enantiomerically pure. The absolute configuration in each2 was determined by Mosher's method; the products were converted to,-di-(R)--methoxy--trifluoromethylphenylacetates (MTPA esters) (3) oferythro (-)- andthreo (+)-veratrylglycerol--(methyl vanillate) ethers (3), whose¹H nuclear magnetic resonance (NMR) spectra were examined and compared with those of four di-(R)-MTPA ester (3) diastereomers from chemically synthesizederythro (±)-3 andthreo (±)-3. To assign the- and-MTPA-OCH₃ peaks, the¹H NMR scans of several compounds that have substructures of 3 and their 3,4,5-trimethoxyphenyl analogues were examined. When a racemic alcohol reacts with (R)-MTPA to give a pair of (R)-MTPA ester diastereomers, the value was defined as the absolute value of the difference in the¹H chemical shifts of the peak between the diastereomers. It was found that the values of-MTPA-OCH₃ were larger than those of-MTPA-OCH₃ owing to a shielding effect of the veratryl ring located on the-MTPA-OCH₃, and that the-MTPA-OCH₃ peaks in the 3,4,5-trimethoxyphenyl compounds shifted downfield relative to those in the veratryl compounds. On the basis of the¹h NMR data of (R)-MTPA esters, the absolute configuration of the four chemically prepared diastereomers (3) were determined. The catabolicerythro 3 [fromerythro (-)-3] andthreo 3 [fromthreo (+)-3] were identical to (R, S, R)-erythro 3 and (R, S, S)- threo 3, respectively. An hydrogen species in the fungal reduction would attack the-ketone fromre-face of both (R)-1 and (S)-1, givingerythro (S, R)-2 andthreo (S, S)-2, respectively.Part of this paper was presented at the 33rd Lignin Symposium, Tsukuba, November 1988     

Karyotype analysis of interspecific fusants of basidiomycetes by pulsed-field gel electrophoresis

The purpose of this research was to analyze the karyotype of the interspecific fusants of twoPleurotus species. Auxotrophic mutants derived from the cultivated strain ofP. ostreatus andP. cornucopiae were used. Protoplasts were fused electrically, and the fusants were selected under auxotrophic complementation. Esterase isozyme analysis showed that several fusants had isozyme bands originating from both parental strains, and others had unilateral isozyme bands. The fusant that had expressed isozyme bands of both parental strains showed chromosomal DNA bands of both of the parental strains in pulsedfield gel electrophoresis analysis. Despite the above results, the chromosomal composition of the fusants obtained by the pulsed-field gel electrophoresis did not exhibit all of the bands of both fusion parents.     

Lignin Characterization of Triploid Clones of Populus tomentosa Carr.

In order to understand the structural characteristics of lignin in triploid clones ofPopulus tomentosa and its changes in the processes of pulping and bleaching, milled wood lignin （MWL）, lignin carbohydrate complex （LCC） and the residual lignin from kraft pulp （KP） and sulfite pulp （SP） were isolated and analyzed by Fourier transform infrared （FTIR） spectrum and ^13C nuclear magnetic resonance （NMR）. The most diagnostic peaks were assigned and the differences were discussed. The spectral patterns reveal that triploid P tomentosa shows the specific features of hardwood from temperate areas, but in the spectrum of FTIR, the strength ratio orAl270 cm^-1 to A1226 cm^-1 is 0.88, higher than the average of hardwood from temperate areas, which will make the lignin delignification more difficult during pulping and bleaching. The LCC from triploid P tomentosa is mainly composed of xyloglucan and glucuronic acid, and other glucides have much lower ratio. In LCC FTIR, there are three peaks at 1 427, 1 329 and 1 046 cm^-1, indicating that both semi-cellulose and cellulose could exist in LCC, and that there might be relationships between cellulose and lignin. Compared with the residual lignin from KP and SP, the condensed structure in KP is more than that in SP.     

Tree-to-tree and clone-to-clone variations of monoterpenes emitted from needles of hinoki (Chamaecyparis obtusa)

Variations in the composition of low boiling point (LBP) monoterpenes emitted from needle samples of 150 hinoki (Chamaecyparis obtuse) trees (30 strains, each with five clones) native to Shimane Prefecture, Japan, were investigated using a headspace technique. The assays revealed considerable proportional variations especially in the amount of sabinene, which ranged from 24% to 78% of the total LBP monoterpenes. The proportions of α-pinene, myrcene, and limonene negatively correlated with that of sabinene overall. In particular, the proportion of limonene showed clear negative correlation with that of sabinene (r = −0.98). Differences in the proportion of sabinene among five clones in each strain were less than 15% in 22 out of 30 strains, indicating that monoterpene composition is constitutively steady in most strains. In a few strains, however, considerable variation in the composition was observed among clones.     

Stereochemistry and biosynthesis of 8-O-4′ neolignans in Eucommia ulmoides: diastereoselective formation of guaiacylglycerol-8-O-4′-(sinapyl alcohol) ether

Stereochemistry and biosynthesis of guaiacylglycerol-8-O-4′-(sinapyl alcohol) ether (GGSE), an 8-O-4′ neolignan, which consists of coniferyl and sinapyl alcohol moieties, in Eucommia ulmoides were investigated. Four 8-O-4′ neolignans, GGSE, syringylglycerol-8-O-4′-(coniferyl alcohol) ether (SGCE), guaiacylglycerol-8-O-4′-(coniferyl alcohol) ether (GGCE), and syringylglycerol-8-O-4′-(sinapyl alcohol) ether (SGSE), were synthesized. Their erythro and threo diastereomers were separated through acetonide derivatives, intermediates of the synthesis, and identified by means of nuclear magnetic resonance (NMR) spectroscopy. All of the erythro-acetonide derivatives have larger coupling constants (ca 9 Hz) for the C₇-H resonances than those of the threo ones (1.5–2 Hz). In the case of the four 8-O-4′ neolignans, the C₇-H coupling constants of the threo-isomers are not smaller than those of the erythro ones. GGSE isolated previously from this plant was identified as the erythro isomer by comparison of the ¹³C-NMR data with synthetic erythro-GGSE and threo-GGSE and the other 8-O-4′ neolignans mentioned as above. Administration of a mixture of [8-¹⁴C]coniferyl alcohol and [8-¹⁴C]sinapyl alcohol to excised shoots of E. ulmoides was carried out and the incorporation of ¹⁴C into erythro-[¹⁴C]GGSE was found to be higher than that in threo-[¹⁴C]GGSE. The occurrence of diastereoselective formation of erythro-GGSE by cross coupling of coniferyl and sinapyl alcohols is suggested.Part of this paper was presented at the 47th Lignin Symposium, Fukuoka, October 2002 and the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, April 2003     

The effects of within-species and between-species variation in wood density on the photodegradation depth profiles of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa)

Low density wood is more rapidly eroded than denser wood when exposed to the weather, possibly because it is more susceptible to photodegradation. Fourier transform infrared microscopy was used to examine: (1) the depth of photodegradation in earlywood and latewood of sugi (Japanese cedar) and earlywood of hinoki (Japanese cypress) exposed for up to 1500 h to artificial sunlight emitted by a xenon lamp (375 W/m² within the 300 to 700 nm spectral range); and (2) the relationship between the density of wood tissues and depth of photodegradation. The depth of photodegradation varied between species (sugi and hinoki) as well as within a growth ring (sugi earlywood and latewood), and there was an inversely proportional relationship between depth of photodegradation and wood density. These findings may explain why low density earlywood is more rapidly eroded than latewood during weathering, and more generally, why there is an inverse relationship between the density of wood species and their rate of erosion during artificial and natural weathering. Part of this work was presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004