Soil-plant nutrition studies on tropical rice

The lowland rice depends comparative1y more on the nitrogen supply by the soil resources than the other upland crops. Usually, the rice plant utilizes much more native soil nitrogen than the applied fertilizer nitrogen(1). Accordingly, the paddy soil fertility is usually regarded as a nitrogen supplying potentiality of the soil in a narrow sense. Many studies(2) on the soil fertility proplems have been focused on the availability and the recovery of this organic nitrogen. Decause the yield of rice are primarily determined by the liberation of this organic nitrogen.     

The oxidation products formed from: Soil organic matter by hydrogen peroxide treatment

The oxidation products formed from soil organic matter during hydrogen peroxide digestion were studied by means of analyses of carbon and nitrogen, thin layer chromatography, infrared Spectroscopy, and redox titration.

The carbon remaining after hydrogen peroxide digestion, as expressed in percentage by WeIght of the original soil was 0.57 to 4.09, corresponding to 17.81 to 29.00 per cent of the carbon fOUnd in the original soil. The nitrogen remaining after the same treatment was 75 to 100 per cent of total nitrogen in the original soil. The greater part of the remaining water soluble nItrogen was NH₃-N. The thin layer chromatography showed the presence of oxalic acid and V.V. light-ahsorbing substances in the oxidation products. No organic matter other than oxalate Was indicated on the infrared spectra. The amount of water soluble oxalate formed from 100 g of soil determined by means of redox titration was 5.7 to 117.0 mmole. Assuming that the ratio of solution: soil is 5:1 at the final stage of per oxidation, the concentration of oxalate in the SUpernatant solution was in the range from 0.011 to 0.234 M.     

Metyltetraprole activity against plant pathogens with relatively rare cytochrome b haplotypes for azoxystrobin resistance

Journal of General Plant Pathology - Metyltetraprole is a novel quinone outside inhibitor (QoI) fungicide designed to avoid cross-resistance in cytochrome b G143A-harboring QoI-resistant...     

Nitrogen and phosphorus runoff modeling in a flat low-lying paddy cultivated area

Chiyoda basin is located in Saga Prefecture in Kyushu Island, Japan, and lies next to the tidal compartment of the Chikugo River to which the excess water in the basin is drained away. Chiyoda basin has a total area of about 1,100 ha and is a typical flat and low-lying paddy-cultivated area. The main environmental issue in this basin is total nitrogen (TN) and total phosphorus (TP) load management because TN and TP, which loaded from farmlands, degrade surface water as a result of anthropogenic eutrophication. This paper presents a mathematical model of TN and TP runoff during an irrigation period in Chiyoda basin in order to elucidate the pollutant fluxes that accompany water transportation in paddy fields and drainage canals, and to evaluate pollutant removal from the study area to the Chikugo River. First, the water flow and the algorithm of gate operation were simulated by a continuous tank model and the accuracy of the model was then evaluated by comparing the simulated water levels with observed ones during an irrigation period. The observed and simulated water levels were in good agreement, indicating that the proposed model is applicable for drainage and water supply analyses in flat, low-lying paddy-cultivated areas. Second, the TN and TP runoff during an irrigation period was simulated based on the TN and TP loads that were determined by observed data in paddy fields. For TN runoff, the simulated results and observed data were in good agreement whereas for TP runoff, the simulated results were higher than the observed data. However, if the settled TP within the paddy tank was calculated as 6%, then the simulated results and the observed data were in good agreement. We concluded that TN runoff from paddy field to the drainage canal system was not affected much by the sediment related process. The present study could provide farmers and managers with a useful tool for controlling the water distribution in an irrigation period, and the TN and TP loads in the downstream area as well as the Chikugo River.     

Effects of incubation times and moisture regimes on pH values and exchangeable cations in acid sulfate soils as influenced by application rates of basic slag

Severe acidifications in acid sulfate soils (ASSs) have occurred worldwide due to sulfuric acidity, which requires sustainable measures for their reclamation. Accordingly, an incubation study was conducted with the topsoil of two different ASSs (Cheringa and Badarkhali) to evaluate the effects of basic slag (BS; size <1 mm, pH 9.6, Ca 20.8%, Mg 9.8%, etc.), on reduction of acidity and changes in exchangeable cations. It is noted that BS is a byproduct of steel industry in Bangladesh and can be collected almost free of charge. These soils received BS at the rate of 0 (T₀), 11 (T₁), 22 (T₂) and 33 (T₃) t ha⁻¹ under various moisture regimes (saturated condition M₁,_, i.e., 100% moisture content, wetting–drying cycles of 100 and 50% moisture M_2, and moisture at field condition M₃, i.e., 50%). The impacts of these treatments on some selected parameters in these soils were studied within 180 days of incubation. The application of BS was found to increase the pH of soils from 3.6 to 5.1 for Cheringa, 3.9 to 5.2 for Badarkhali soils at the end of incubation. These increments were more striking with the highest doses of BS under saturated moisture conditions in both of the soils. The ECe of the soils was not much influenced by the application of BS regardless of time. The treatments exerted significant (P ≤ 0.05) effects on exchangeable cations in different periods of incubation. The striking changes were recorded for the rate of increments of Ca²⁺ and Mg²⁺, which were about 2–3 times higher for Ca and more than 2 times higher for Mg²⁺ compared with the control after 180 days of incubation. These results suggest that the application of BS not only increased the Ca²⁺ to the higher amount than that of the increment of Mg²⁺ in the soils, but also improved one of the important criteria of Ca²⁺ and Mg²⁺ ratio in the soils.     

Differences of tensile strength distributions between mechanically high-grade and low-grade Japanese larch lumber III: effect of knot restriction on the strength of lumber

It is well known that the presence of knots in structural lumber is one of the most important strengthreducing factors. For practical purposes, visual grading including knot restriction is an effective method for nondestructive evaluation of strength. Edge knot restriction for not only visually graded lumbers but also mechanically graded lumbers is specified in the Japanese agricultural standards for glued laminated lumber. We conducted experimental studies on differences of tensile strength distributions between mechanically high-grade and low-grade Japanese larch (Larix kaempferi, carriere) lumbers daily used for manufacturing glued laminated timbers in Nagano, Japan. We then examined the additional visual grading of mechanically graded lumbers for nondestructive evaluation. We visually graded the prepared mechanically graded lumber by focusing on the knots' area ratio of grouped knots. We confirmed that the higher visual grade related to the stronger tensile strength, similar to our present knowledge; but the effects of knot restriction were reduced when the length of the lumber increased in view of nonparametric 5th percentiles of tensile strength. The differences in the strength/elasticity ratio between mechanically high-grade and low-grade lumber were negligible. It was clear that the length effect on the ratio in visually graded high-grade lumber was smaller than that of visually graded low-grade lumber. It was thus concluded that knot restriction should have little effect on the tensile strength of mechanically graded lumber.     

Analysis of the electrophoretic karyotype ofFlammulina velutipes

The karyotype ofFlammulina velutipes (Curt.: Fr.) Sing. was analyzed electrophoretically using contourclamped homogeneous electric field gel electrophoresis and hybridization with DNA probes. The chromosomal DNA from the monokaryon (Fv-4K) and the dikaryon (Fv-4) were resolved into six and eight bands, respectively. The sizes of the chromosomes ranged from 1.9 to 6.0 megabase (Mb) pairs. Each of the separated bands of chromosomal DNA was identified by use of five cloned probes. The number of these chromosomes was estimated to be 6 and 12, respectively; and the size of the entire genome was estimated to be about 20.1 and 38.6Mb, respectively. From a comparison of the hybridization patterns, the existence of allelic chromosomes of different sizes was deduced in the Fv-4 strain.     

Perceptual learning incepted by decoded fMRI neurofeedback without stimulus presentation

It is controversial whether the adult primate early visual cortex is sufficiently plastic to cause visual perceptual learning (VPL). The controversy occurs partially because most VPL studies have examined correlations between behavioral and neural activity changes rather than cause-and-effect relationships. With an online-feedback method that uses decoded functional magnetic resonance imaging (fMRI) signals, we induced activity patterns only in early visual cortex corresponding to an orientation without stimulus presentation or participants' awareness of what was to be learned. The induced activation caused VPL specific to the orientation. These results suggest that early visual areas are so plastic that mere inductions of activity patterns are sufficient to cause VPL. This technique can induce plasticity in a highly selective manner, potentially leading to powerful training and rehabilitative protocols.     

Effect of moisture content of members on mechanical properties of timber joints

To investigate the effect of moisture content (MC) of members on the mechanical properties of timber joints, bending tests of precut joints and shear tests of dowel-type joints were carried out using timbers of Japanese cedar (Cryptomeria japonica D. Don) with three moisture conditions: green, kiln-dried with a MC target of 15%, and over-kiln-dried with a MC target of 5%. For the bending test, timbers were processed with a precut processing machine into “koshikake-ari” (a kind of dovetail joint) and “koshikake-kama” (a kind of mortise and tenon joint). A pair of members was jointed together without mechanical fasteners. Bolts (diameter = 12 mm) and nails (diameter = 2.45 mm) were used as dowels in the shear test. Bolted joints were constructed with one bolt and two metal side plates. Two nails and two metal side plates were used for the nailed joint. For precut joints, no clear effect of MC was recognized on maximum moment and initial stiffness. The maximum strength of mechanical joints assembled with kiln-dried wood was changed by the degree of drying. Stiffness of the joints assembled with kiln-dried specimens was larger than that of the joints assembled with green specimens.Part of this study was presented at the 7th International IUFRO Wood Drying Conference, Tsukuba, July 2001     

Soybean preference for Bradyrhizobium japonicum for nodulation

For examining the probability of increase in the occupation ratio of inoculated rhizobium in nodules, various Rj-soybean cultivars including the Rj ₂ Rj ₃ Rj ₄-lines of soybean were grown in a field of the Kyushu University Farm. Bradyrhizobium japonicum USDA110 that carries uptake hydrogenase (Hup⁺) was used as an inoculum. The relative efficiency of nitrogen fixation generally increased by the inoculation. However, there were no significant differences in the effects among the genotypes of the host plants. The occupation ratio of serogroup USDA110 in the nodules on the taproot of the inoculated plants was in the range of 77–100%, suggesting that the B. japonicum strain USDA110 infected taproots immediately after inoculation. The occupation ratios in the nodules on the lateral roots were 53–67, 40–86, 63–83, and 62–77% in inoculated plants of the non-Rj-, Rj ₂ Rj ₃-, Rj ₄-, and Rj ₂ Rj ₃ Rj ₄-genotypes, respectively, and they decreased in all the genotypes with the progression of growth. At the time of the first sampling, the occupation ratios on the lateral roots of these Rj ₂ Rj ₃ Rj ₄-genotypes showed values intermediate between those of IAC-2 (Rj ₂ Rj ₃) and Hill (Rj ₄) , which were the parent cultivars of the Rj ₂ Rj ₃ Rj ₄-lines, B340, B349, and C242. The reduction in the occupation ratio of the serogroup USDA110 for about 1 month after the first sampling was the lowest (0.13–0.16) in the Rj ₂ Rj ₃ Rj ₄-genotypes, excluding B349, followed by the non-Rj- and Rj ₂ Rj ₃-genotypes and highest (0.52–0.69) in the Rj ₄-genotypes, excluding Hill. Therefore, it was considered that the population of compatible rhizobia with host soybean plants increased in the rhizosphere with the progression of the development and growth. The results showed that with the expansion of the root area of host plants, the occupation ratio of type A rhizobia including the serogroup USDA110 was high. Therefore, the Rj ₂ Rj ₃ Rj ₄-genotypes were superior to other Rj-genotypes in terms of the inoculation effects of nodulation type A rhizobium, B. japonicum USDA110. However, the preference of the Rj ₂ Rj ₃ Rj ₄-genotype for serogroup USDA110 is not sufficient to rule out the competition with the other serogroups in this study. Therefore, the study should be centered on the isolation of more efficient (Hup⁺) and highly compatible rhizobial strains with the Rj ₂ Rj ₃ Rj ₄- genotypes.