14-3-3 protein down-regulates key enzyme activities of nitrate and carbohydrate metabolism in potato plants

The 14-3-3 protein is one of the best candidates for coordinating all plant metabolic pathways. To verify this suggestion transgenic potato plants with repression of one (J4 and J5 plants), two (G1 plants), and six (G3 plants) constitutive 14-3-3 protein isoforms as well as plants overexpressing the 14-3-3 protein were studied. Reduction in the 14-3-3 protein level in the J4 and J5 transformants, the G1 transformants, and the G3 transformants was close to 29, 41.5, 38, and 55%, respectively. In the case of the 14-3-3 overexpressing plants (J2), a 30% increase in protein content was detected. Changes in nitrate reductase (NR), sucrose phosphate synthase (SPS), and starch synthase (SS) activities in the transgenic plants perfectly reflect the overall 14-3-3 protein level. The highest increase in enzyme activities was observed for the G3 plants and the lowest for the J4 transformants. The same was detected for the measured metabolites. The highest increase in the protein, starch, and sucrose levels was detected in the tubers from the G3 transgenic plants. Because there was almost no change in the isoform ratio in the transgenic plants when compared to the control, it is suggested that it is the overall content of the 14-3-3 protein, rather than the content of particular isoforms, which plays a crucial role in the regulation of enzyme activities and thus in metabolite synthesis. The properties of the 14-3-3 overexpressing plants are very similar to those of the control ones, suggesting that the protein is in excess in the nontransformants and a further increase in its content is not recognized by cell metabolism. A considerable influence of the 14-3-3 protein level on potato plant metabolism was demonstrated. This effect was observed in key metabolic enzyme activities and metabolite content as well. A high variability between mean values, representing individual transgenes, with respect to nitrate reductase, sucrose phosphate synthase, and starch synthase activities in the examined genotypes was noted. These changes were closely correlated with metabolite levels, among them protein, starch, reducing sugars, and sucrose. The results obtained for the five types of transgenic potato plants in comparison with the control were statistically assessed using discriminate function and cluster analyses.     

Chemical comparison of goldenseal (Hydrastis canadensis L.) root powder from three commercial suppliers

The characterization of herbal materials is a significant challenge to analytical chemists. Goldenseal (Hydrastis canadensis L.), which has been chosen for toxicity evaluation by NIEHS, is among the top 15 herbal supplements currently on the market and contains a complex mixture of indigenous components ranging from carbohydrates and amino acids to isoquinoline alkaloids. One key component of herbal supplement production is botanical authentication, which is also recommended prior to initiation of efficacy or toxicological studies. To evaluate material available to consumers, goldenseal root powder was obtained from three commercial suppliers and a strategy was developed for characterization and comparison that included Soxhlet extraction, HPLC, GC-MS, and LC-MS analyses. HPLC was used to determine the weight percentages of the goldenseal alkaloids berberine, hydrastine, and canadine in the various extract residues. Palmatine, an isoquinoline alkaloid native to Coptis spp. and other common goldenseal adulterants, was also quantitated using HPLC. GC-MS was used to identify non-alkaloid constituents in goldenseal root powder, whereas LC-MS was used to identify alkaloid components. After review of the characterization data, it was determined that alkaloid content was the best biomarker for goldenseal. A 20-min ambient extraction method for the determination of alkaloid content was also developed and used to analyze the commercial material. All three lots of purchased material contained goldenseal alkaloids hydrastinine, berberastine, tetrahydroberberastine, canadaline, berberine, hydrastine, and canadine. Material from a single supplier also contained palmatine, coptisine, and jatrorrhizine, thus indicating that the material was not pure goldenseal. Comparative data for three commercial sources of goldenseal root powder are presented.     

A Novel Particle Contact Assay with the Yeast Saccharomyces cerevisiae (8 pp)

Goal, Scope and Background   Numerous xenobiotics released into surface waters are transferred to suspended particulate matter and finally attached to sediments. Aquatic organisms may be exposed to them by direct particle feeding, by physical contact with contaminated surfaces as an exposure route, and by the uptake of dissolved contaminants after equilibration via the free water phase. In order to assess potential sediment toxicity, each of these exposure routes has to be addressed. This paper presents a newly developed particle contact assay that uses the fermentation performance of a specific Saccharomyces cerevisiae strain for the assessment of toxic effects in sediments. The test procedure is based on the characteristic feature of growing yeast cells to attach to sediment particles, which are also relevant for the accumulation of contaminants. The physical contact with lipophilic contaminants mirrors an exposition pathway for the direct uptake into the cells. In order to quantitatively characterize the toxic effects of particle attached pollutants on the fermentation performance, unpolluted native reference sediment was spiked with representatives for widely distributed anthropogenic contaminants. Methods   Saccharomyces cerevisiae was established as sensitive eukaryotic microorganism for the ecotoxicological assessment of particle attached anthropogenic contaminants in freshwater sediments. For this purpose, yeast cells were cultivated in sediment samples and the resulting fermentation performance was continuously measured. Sediments artifically spiked with HCB, PCB, g-HCH, DDT, and benzo(a)pyrene and solutions of each contaminant were comparatively investigated by means of their adverse effects on yeast fermentation performance. Additionally, four native river sediments characterized by increasing levels of pollution were assessed by the yeast particle contact assay, and simultaneously by standard aquatic tests with algae, daphniae, and luminescent bacteria using pore water and elutriates. Results of the bioassays were related to specific sediment contamination with respect to metals and organic priority pollutants. Results and Discussion   In sediments spiked with PCB and benzo(a)pyrene fermentation, performance was affected extensively below concentrations inhibiting fermentation in contaminant solutions. This suggests a high efficiency of the exposure route by physical contact. The fermentation performance was only slightly affected by single lipophilic pollutants, whereas mixtures of individually spiked sediments caused critically reduced fermentation performance suggesting additive synergistic effects. Native river sediments modestly to critically polluted by hazardous organic compounds lead to a slightly to dangerously reduced fermentation performance in the yeast contact assay. These inhibitory effects were much less pronounced in the standard bioassays conducted with algae, daphniae and luminescent bacteria, applying pore waters and elutriates as sample matrices. Using pore water, inhibition was measured only in the most polluted sediment, elutriates lead to a slight inhibition of the algal growth in the undiluted sample only. These results indicate an improved sensitivity of the yeast particle contact assay compared to the standard assays, due to uptake and physical cell contact as additional routes of exposure. Conclusion   The yeast particle contact assay is a valuable tool for the assessment of ecotoxicological potential in freshwater sediments. Since the assay addresses physical contact as an exposure route, it indicates bioavailability of lipophilic compounds in sediments. Outlook   The sensitive indication of bioavailable contaminants associated to sediment particles by the newly developed yeast particle contact assay recommends it as a complementary microbial bioassay in a test battery for assessing major pathways of contaminants in whole sediments.     

Impact of soil stockpiling and mining rehabilitation on earthworm communities

As key ‘ecosystem engineers’, earthworms improve mineralization of organic matter, plant growth, soil quality, and are an important component of many terrestrial food webs. Under appropriate conditions, they are therefore likely to accelerate the restoration of soil ecosystem function after mining.Conserving naturally occurring populations and facilitating their recolonisation appears as the most efficient way to increase earthworms’ overall effect. The impact of mining activities and restoration measures on New Zealand endemic earthworm communities was tested. Earthworm biomass and diversity were compared in four different habitat types.Mining activities, not surprisingly, are shown here to have a detrimental impact on earthworm communities. Soil stockpiling induces anaerobic conditions at and below a depth of 1 m, where earthworms do not survive. The use of stockpiled soil for vegetation replanting therefore leads to low diversity and low abundance of earthworms. An alternative restoration technique consisting in transferring vegetation and soil units (the vegetation direct transfer) was efficient in preserving earthworm populations with earthworm biomass and diversity not significantly different from those observed in undisturbed areas. Based on these results, we recommend vegetation direct transfer (VDT) to be prioritised whenever it is logistically and economically feasible. When VDT is not applicable, low stockpiles should be prioritised as they will comprise a higher proportion of good quality soil (at the surface) and a lower proportion of anaerobic and compacted soil (below 1 m depth at the studied site).     

The accelerated reduction and elimination of toxics in Canada: The case of mercury-containing medical instruments in Quebec hospital centres

In Canada, medical instruments containing mercury (Hg) are still widely used in hospitals. These are mostly thermometers and sphygmomanometers. Mercury present in these instruments does not in itself constitute a risk of contamination since this metal is contained within a closed system. However, breakage, inadequate maintenance and disposal of such instruments can expose workers and the public to this toxic substance. In Quebec, 80% of the 28 hospitals surveyed still use Hg sphygmomanometers and 45% Hg thermometers. Besides, 35% do not have any recovery procedures in case of spillage and most mercury spills are apparently not reported. Two main courses of action are recommended: the gradual replacement of these medical instruments by aneroid sphygmomanometers and electronic thermometers, and the establishment and communication, in the form of a handbook, of guidelines to handle and dispose of mercury safely.     

Influence of lignification and feruloylation of maize cell walls on the adsorption of heterocyclic aromatic amines

Both epidemiological and experimental data indicate that a diet rich in fiber may reduce cancer risk. One possible mechanism is by adsorbing carcinogens and transporting them out of the body without metabolic activation. We investigated the role of fiber lignification and feruloylation on the adsorption of four of the most relevant heterocyclic aromatic amines in food: 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx), 2-amino-3-methylimidazo[4,5-f]quinoline (IQ), 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP), and 2-amino-9H-pyrido[2,3-b]indole (AalphaC). Adsorption experiments, under conditions mimicking the small intestine, were carried out using nonlignified and artificially lignified primary maize walls with defined lignin and ferulate/diferulate concentrations and defined lignin compositions. Lignin concentration and composition both influenced the adsorption of heterocyclic aromatic amines, especially the more hydrophobic types. Heterocyclic aromatic amine adsorption increased with lignin concentration. 2-Amino-1-methyl-6-phenylimidazo[4,5-b]pyridine and 2-amino-9H-pyrido[2,3-b]indole were better adsorbed by guaiacyl-rich lignins, 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline by syringyl-rich lignins, whereas the adsorption of 2-amino-3-methylimidazo[4,5-f]quinoline was not clearly influenced by lignin composition. Nonlignified cell walls adsorbed lesser amounts of heterocyclic aromatic amines. Variations in cell wall feruloylation had no effect on heterocyclic aromatic amine adsorption.     

Molecular Weight: Measurements with Gravity Cells

A gravity cell can be used to determine the weights of particles greater than 10(8) molecular weight units. The solution is maintained at a temperature which is constant to +/- 0.001 degrees C until equilibrium between sedimentation produced by gravity is balanced by back diffusion. The weight-average molecular (particle) weight of tipula iridescent virus was (1.05 +/- 0.02) x 10(9).