Screening of extracts of Japanese woods for melanin biosynthesis inhibition

The effects of 120 methanol extracts prepared from bark and heartwood of 69 types of Japanese wood on the melanin production of B16 melanoma cells were examined. The melanin content of B16 melanoma cells was determined spectrophotometrically at 405nm. The extracts were also examined for their effects on cell viability. We found that the methanol extracts of Fagus crenata (buna, wood, 100μg/ml), Sapium sebiferum (Nankinhaze, wood, bark, 10μg/ml), and Zelkova serrata (keyaki, wood, 10μg/ml) greatly inhibited the melanin production of B16 melanoma cells without significant cytotoxicity. However, these extracts did not inhibit tyrosinase activity at the concentration of 100μg/ml. These findings indicate that the depigmenting mechanism of these extracts involves the suppression of some pigmenting signals in stimulating melanogenesis rather than the inhibition of tyrosinase activity. Part of this study was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, Japan, March 2003     

Lignin-degrading activity of edible mushroom <Emphasis Type="Italic">Strobilurus ohshimae</Emphasis> that forms fruiting bodies on buried sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) twigs

Strobilurus ohshimae is an edible mushroom, and it specifically forms its fruiting bodies on buried sugi (Cryptomeria japonica) twigs. In this research, we studied lignindegrading activity of S. ohshimae. We isolated 18 strains of S. ohshimae from various regions of Japan, and determined their lignin degradation rates on sugi wood meal medium. All the strains of S. ohshimae degraded approximately 6%–12% of sugi lignin in 30 days, and these lignin degradation rates were 1.5–3 times higher than those of Trametes versicolor, which is a typical lignin-degrading fungus. Among the three main lignin-degrading enzymes, activity of lignin peroxidase and manganese peroxidase was not observed, while 4340U/g of laccase was produced in 30 days. To investigate the effect of wood species on lignin degradation by S. ohshimae, the lignin degradation rate and laccase productivity on sugi wood meal medium were compared with those on beech (Fagus crenata). In T. versicolor, both lignin degradation rate and laccase productivity were higher on beech than on sugi. Conversely, in S. ohshimae, lignin degradation rate and laccase productivity were higher on sugi than on beech. Therefore, it was suggested that coniferous lignin is not always difficult to degrade for the fungi that inhabit softwood. Part of this article presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004     

Drivers of adoption of eucalypt tree farming by smallholders in Thailand

Eucalypt (Eucalyptus spp.) tree farming is a source of income for many smallholders in developing and emerging countries and critical to the resource supply of many pulp and paper companies. These companies rely on smallholders adopting tree farming, sometimes by offering a contract. This paper reports a study from four regions of Thailand, where smallholder eucalypt tree farming is important, which investigated what characteristics of smallholders were associated with greater adoption of tree farming. A total of 461 eucalypt tree farmers and 171 non-tree farmers were randomly selected and surveyed in these regions, using a door-to-door household survey. A logit analysis corroborated hypotheses about the drivers of adoption. Qualitative analyses were used to inform interpretation of the quantitative results and shed light on the role of eucalypt tree farming in smallholders’ livelihood. Results demonstrate that those with suitable land available are more likely to adopt eucalypt tree farming than others. In addition, perception of land tenure security matters in the adoption of tree growing, but holding a formal land tenure document does not. Adoption of eucalypt tree farming in Thailand is not part of a land use intensification strategy. Instead, eucalypts are used as an alternative crop for low productivity land, on which eucalypts are the most profitable crop. Eucalypt tree farming also gives smallholders an opportunity to diversify their income. In addition, this alternative land use has the advantage of requiring low labour inputs between planting and harvest. This is particularly advantageous for many tree growers who have off-farm income or rely on hired labour for farming their land.     

A review of decision-making approaches to handle uncertainty and risk in adaptive forest management under climate change

• Context  

This review paper provides an overview of approaches to which we may resort for handling the complex decision problems involving uncertainty and risk that climate change implies for forest managers. Modelling approaches that could support adaptive management strategies seem to be called for, not only as climate change denotes increased economic uncertainty but also because new and more reliable information becomes available as time passes and climate changes.     

Towards assessing the sustainability of European logging operations

The forest-based sector has been at the forefront in operationally implementing the sustainability concept, its associated principles and indicators for sustainable forest management. Several methods have been developed to study environmental impacts of forestry activities, but none of the existing tools address all the dimensions of sustainability along the whole forest wood chain (FWC) in a balanced way. Consequently, the decision was made to develop a tool for sustainability impact assessment (ToSIA), the modelling framework for sustainability impact assessment of FWCs. The objective of the EU Project Eforwood was to develop ToSIA, a decision support tool. Within ToSIA, a FWC is modelled as a number of interconnected processes. For each process, a range of economic, environmental and social indicators and their respective values are calculated, thus representing the three pillars of sustainability. By this method, the multifunctionality of forests can be assessed and supply chains can be compared with respect to sustainability. Sensitivity analysis and scenario techniques can be applied to learn about the effect of expected changes to the structure of the chain, the material flows and the indicator values. In order to provide the tool with information about forest and logging operations, data were collected at two fundamental levels: (1) a regional level with case studies in Scandinavia, Iberia and Baden-Württemberg and (2) a European level with a case study that reflects conditions in the 27 countries of the European Union. This paper describes and details the harvesting and logging processes for the European countries. The results are displayed for each of the three regional case studies as well as aggregated to five principal areas in Europe: Eastern, Northern, Western, Central and Southwest Europe.     

Evaluation of the flammability of gorse (<Emphasis Type="Italic">Ulex europaeus</Emphasis> L.) managed by prescribed burning

• Introduction  

The abandonment of rural areas has led to an increase of the fire-prone European gorse (Ulex europaeus L.) communities in some regions, where prescribed burning is a technique applied to control them. Understanding flammability changes after treatments is crucial for the sustainable use of fire.     

Are composts from shredded leafy branches of fast-growing forest species suitable as nursery growing media in arid regions?

The morpho-physiological quality of seedlings is negatively affected by the wide scale use of forest soils as substrates in developing countries. With the objective of finding long-term sustainable supply of growing media, compost was produced from shredded branches of three fast growing species (Acacia cyanophylla (AA), Acacia cyclops (AS) and Eucalyptus gomphocephala (EG). The composting process covered three different periods over the course of a year. Pile temperatures were monitored daily and the composts were routinely sampled and analyzed for 19 chemical variables. Although composting is feasible year-round in arid climates, compost produced in the humid cool conditions of autumn, winter and early spring reaches the maturation phase more quickly than compost produced under hot, dry summer conditions. It also requires less turning and water. The evolution of the composting process and quality of the final product can be assessed using three chemical variables (C/N, pH, EC). Seed germination rates in the three types of compost were similar to that in a peat:vermiculite substrate and vigorous high quality seedlings were produced in the two acacia composts. However, compost-grown seedlings had significantly smaller shoots and root systems than those produced in peat substrate. Principal components analyses showed that the quality of a compost-based substrate is reproducible and that its final chemical composition can be predicted from its raw organic materials. The EG composts had higher pH than the acacia composts, whereas the AA and EG composts were higher in mineral salts than the AS.     

林业生态工程效益补偿问题研究初探

生态效益补偿对于促进林业生态工程建设、保护森林生产者和经营者的切身利益具有重要的作用.本文在分析国内外生态效益补偿现状的基础上,通过对建立森林生态效益补偿机制的必要性、原则、途径以及补偿标准等问题进行深入探讨,为进一步完善我国森林生态效益补偿机制提供科学依据.森林生态效益补偿资金的建立,不仅为森林资源管护提供稳定的资金来源,更是对森林生态效益价值的认可,从根本上解决了林业生态工程建设的动力和机制问题,将对中国林业和生态建设产生广泛而深远的影响.     

Effect of maleic anhydride grafted styrene-ethylene-butylene-styrene （MA-SEBS） on impact fracture behavior of polypropylene / wood fiber composites

MA-SEBS as compatibilizer and impact modifier was incorporated into Polypropylene/Wood Fiber （PP/WF） to enhance interface adhesion and impact strength of the composite. The effect of MA-SEBS content on the impact fracture behavior of PP/WF composites was studied. The impact properties of composites with 8% MA-SEBS reached the maximum value. And further increasing of MA-SEBS content to 10% did not improve the fracture toughness, but improved the stiffness of composites by DMA analysis. This was attributed to the improved PP/WF adhesion. As the MA-SEBS content is more than 8%, the molecule interaction of PP and WF was expected to much stronger than lower MA-SEBS. Scanning electron microscopy （SEM） was performed to analyze the impact fracture surface and showed a stronger affinity for the wood surfaces.     

Influence of Ammoniacal Copper Quaternary treatments on mechanical properties of blue-stained Lodgepole Pine wood

Three concentrations （2.8%, 2.0%, 1.2%） of Ammoniacal Copper Quaternary （ACQ） was selected to treat Lodgepole pine wood for evaluating ACQ treatment on mechanical properties of blue-stained wood. The bending modules of elasticity （MOE）, modules of rupture （MOR）, toughness and shearing strength parallel to grain on tangential surface, are tested according to the criteria GB1927-1943-91. Non-treated sample were also tested according to the same procedure. The results showed that the three groups specimen impregnated by different concentrations of ACQ solution met the AWPA standard 2003 of America （UC4A 6.4g/cm^3）. There were significant difference of toughness between treated wood and non-treated wood （p=0.01）, but there were no statistically significant differences among three concentrations in terms of toughness, and toughness of treated wood was approximately 20% lower than non-treated. MOR, MOE as well as sheafing strength parallel to grain were found to be not significantly different between treated wood and non-treated one, and there were no statistically significant difference among three concentrations of ACQ too. Toughness, MOR, MOE and sheafing strength parallel to grain increased with decrease of concentration of ACQ, but they were hardly affected by ACQ preservatives.