丛枝菌根真菌接种对白车轴草耐盐性的影响

丛枝菌根真菌(AMF)可与植物共生形成复杂的菌丝网络,影响植物生长及抗逆能力。目前关于AMF对白车轴草耐盐性的影响尚存争议,本研究采用盆栽试验,研究在盐胁迫条件下(NaCl浓度为150 mmol·L^-1),接种AMF对拉丁诺白车轴草耐盐性的影响。结果表明,在盐胁迫条件下,与对照相比,白车轴草的生长与生理指标均受到抑制。盐胁迫下接种AMF后,白车轴草株高、干重、PSⅡ最大光能转换效率和相对含水量均有增加,丙二醛(MDA)含量以及相对电导率有所降低,渗透调节物质均有提高,其中可溶性糖(SS)和游离脯氨酸(Pro)含量分别提高了32.03%和9.42%。说明盐胁迫抑制白车轴草的生长,接种AMF增强了白车轴草抗逆适应能力,促进白车轴草的生长,增加渗透调节物质含量,提高白车轴草耐盐胁迫的能力。     

Temporal-spatial Filtering in the Preprocessing of Clinical EEG Signals

EEG spot-recording for clinical patients in the bed is always advocated due to easing patients and making them comfortable. But EEG signals recorded in the ward exposed to various noisesand interference is less effective in the EEG analysis. Atemporal-spatial filter is designed for noise removing of clinical EEG signals, the first filtering is temporal filtering using band-pass filter, and the second filtering is spatial filtering with ICA-based spatial filter. Experimental results indicate that various noises and interferences, such as power interference, blinking, eyes movements, muscle moments, ECG artifacts, etc., are removed effectively, individually or simultaneously.     

CALCULATION OF TNE END-EFFECT FACTOR OF SYNCHRONOUS MOTOR WITH CYLINDRICAL SOLID ROTOR

This paper presents the end-effect factor of Synchronous motor with cylindricalsolid rotor offered by analysing the 3-D electromagnetic field and using the Poynting vector.To ap-ply it in an actual calculation,the end-effect factor is proved correct and applicable.     

A PRACTICAL METHOD OF DESIGNING WALL BEAMS IN FRAMES

Brick masonry wall-beams in frames are girders,carrying brick masonrywalls in buildings with only one or two storied reinforced concrete frames atthe bottom of it.How to anaIyse and design such an element is an outstand-ing problem.In this case,there are no analytical and designing rules in thestate code in force.Therefore,designers have to seek other methods,in whichmost are very conservative and expensive.In order to change this case,thispaper provides an analytical and practical mathod for designers.     

单株幼龄苹果树修剪仿真研究

修剪是果树生产中重要的技术手段,要想研究更加合理的修剪技术体系,就必须保证能够对修剪反应有准确、直观和及时的判断,而仿真模拟技术提供了这种可能。以幼龄苹果树为研究对象,采用不同修剪处理对比的方法,在田间试验的基础上,总结修剪反应规律,构建苹果树结构和修剪模型。在此基础上基于Qt框架和OpenGL图形库,开发了单株苹果树修剪仿真软件平台。结合优化算法,通过仿真平台模拟了给定生产目标的修剪方案优化,优化结果对虚拟学习和实际生产提供了可视化指导。     

基于整车性能的悬架匹配优化设计

以某多功能商务车为研究对象,利用ADAMS软件建立了整车多刚体动力学模型,并以车身垂直加速度和角加速度为目标函数对悬架系统进行优化设计。将优化前、后整车性能仿真结果进行了对比,结果表明优化后的悬架参数能有效地改善车辆的行驶性能。研究结果为虚拟样机技术在车辆工程中的实际应用提供了参考。     

施水播种条件下灌溉水入渗模型研究

运用土壤动力学原理建立了灌溉水入渗的数学模型，并进行了实际灌水的试验验证，试验结果表明所建模型的模拟结果与试验结果吻合较好。应用模型模拟分析发现：适量增加沟宽或回土量可以减小入渗时间，缩短播种机排水口至排种口距离。     

苹果水心病的光学无损检测

通过密度法和自行研制的水心病检测仪器对苹果样品进行检测 ,结果表明 :密度无法分离该样品水心病 ;而 1～ 4级水心病的透光强度之间存在显著差异 ,可以进行水心病判断。把近红外 810 nm的计算透光强度2 5 0 0 0作为界限值可以将好果 (1级 )与 3、4级果完全分离 ,2级果有 2 9%分离