High water content silk protein-based hydrogels with tunable elasticity fabricated via a Ru(II) mediated photochemical cross-linking method

Silk is very promising in the field of biomaterials as a natural biomacromolecule. Silk protein can be made into various forms of materials, including hydrogels. However, silk protein-based hydrogels have not attracted much attention due to its weak mechanical properties. Here, we report high water content silk protein-based hydrogels with tunable elasticity which were fabricated through Ru(II) mediated photochemically cross-linking tyrosine residues in regenerated silk protein. The regenerated silk protein was characterized by Fourier transform infrared spectroscopy (FTIR). The gelation kinetics of the silk protein was studied by rheology measurements. The compressive mechanical properties of the silk protein-based hydrogels was investigated using compressive tests and dynamic mechanical analysis (DMA). Compressive modulus of the hydrogels reached 349±64 MPa at 15 % strain. The fabricated silk protein-based hydrogels were also characterized by Scanning electron microscopy (SEM), revealing an interconnected porous network structure, typical of hydrogels, with an average pore size of approximately 130 μm. Finally, biocompatibility of the silk protein-based hydrogels was demonstrated through cell culture studies using a human fibroblast cell line, HFL1. The reported silk protein-based hydrogels represent a promising candidate for biomaterial applications.     

Artificial polyploidy in medicinal plants: Advancement in the last two decades and impending prospects

Medicinal plants are in huge demand since the consumption is widespread and ever-increasing globally. The conventional breeding programs are generally environmental dependent; prone to different biotic and abiotic stresses as well as the secondary metabolite content is too low to harvest. In this context, developing polyploid individuals artificially would be a remarkable approach to increase vigor and attain this objective. Polyploids often exhibit some morphological features that are different or greater in forms than their diploid progenies. Polyploidization can be induced by quite a few antimitotic agents. The most frequently used antimitotic chemicals are colchicine, trifluralin, and oryzalin. The whole method of induced chromosome doubling consists of a series of steps, including an induction phase, regrowth phase, and a confirmation technique to evaluate the rate of achievement. The induction phase depends on different factors, such as explant types, antimitotic agents, its different concentrations, and exposure durations. To evaluate the accomplishment of polyploidization, morphological or anatomical observations are recorded as a rapid method. However, chromosome count and flow cytometry are the most eminent method for absolute confirmation. Despite significant prospects of polyploidization, there has been very little research on medicinal plants. The current review gives an overview of the different parameters of in vitro chromosome doubling, the history of the technique, and progress made over the last two decades.     

Rapid detection of <Emphasis Type="Italic">Peste des Petits Ruminants</Emphasis> (PPR) virus antigen in Sudan by agar gel precipitation (AGPT) and haemagglutination (HA) Tests

AGPT and HA tests were employed for rapid diagnosis of PPRV infection in sheep and goats in Sudan. Forty lymph nodes and spleen samples from suspected cases of PPR in both sheep and goats were examined by AGPT and HA tests for detection of PPRV antigen. Viral antigen was detected from (77.5%) of the samples tested by AGPT and (92.5%) tested by HA test. The results of both tests revealed that HA test was more sensitive than AGPT for detection of PPRV antigen (Kappa statistics 0.4366). Another advantage of the HA test over AGPT was that it can differentiate PPRV from RPV. Thus the HA test represents a quick, easy, simple, cheap and reliable confirmatory test for the diagnosis of PPR and differential diagnosis of PPRV and RPV. The HA test was carried out using chicken, goat and pig RBCs. Chicken RBCs were found to be the most sensitive for detection of PPRV antigen, followed by goat then pig RBCs. The HA time when using chicken RBCs was 20–25 minutes, using goat RBCs was 25–30 minutes and using pig RBCs was 40–45 minutes. The distribution of PPR infection in four different regions of Sudan was investigated.     

Guava (<Emphasis Type="Italic">Psidium guajava L</Emphasis>. cv. Red Suprema) Crude Extract Protect Human Dermal Fibroblasts against Cytotoxic Damage Mediated by Oxidative Stress

We analyzed guava fruits (Psidium guajava L. cv. Red Suprema) from Cuba to determine their chemical composition, total antioxidant capacity, as well as their protective effect against oxidative damage using an in vitro model of human dermal fibroblasts. The guava fruit is a natural source of bioactive compounds, such as polyphenols, vitamin C, folates and beta carotenes with proven health benefits. Human dermal fibroblasts were pre-incubated with different concentrations of guava crude extract and then subjected to oxidative stress using the AAPH stressor. The number of apoptotic and dead cells, as well as the markers of oxidative damage such as lipid and protein oxidation significantly decreased when cells were pre-incubated with guava crude extract and then exposed to the stressor. The activity of antioxidant enzymes also improved when cells were pre-incubated with guava crude extract in comparison to cells subjected to stress without prior pre-incubation with the guava extract. The results obtained in this study highlight the health benefits of guava regarding oxidative stress, proving it to be an important source of bioactive compounds associated with important biological properties.     

BMC ecology image competition 2017: the winning images

For the fifth year, BMC Ecology is proud to present the winning images from our annual image competition. The 2017 edition received entries by talented shutterbug-ecologists from across the world, showcasing research that is increasing our understanding of ecosystems worldwide and the beauty and diversity of life on our planet. In this editorial we showcase the winning images, as chosen by our Editorial Board and guest judge Chris Darimont, as well as our selection of highly commended images. Enjoy!     

Is it economically feasible to harvest by management zone?

The economics of harvesting wheat based on input management zones in the northern wheatbelt of Western Australia was studied using a simulated field of regular dimensions with varying zone sizes and layouts. Fertilizer application rates and crop yield and quality data from field trials of input management were used to estimate the gross crop revenue and harvesting costs from the different field layouts and zone combinations. As a general observation there was no consistency in the results; harvesting by zone generated more gross income in some combinations of field layout and yield quantity scenarios, but not in others. However, there were key factors in determining whether it was profitable to harvest by zone. These were prior knowledge of the potential yield and quality characteristics of grain from each zone in a field, and the layout of zones within a field.     

Fabrication of electropsun PLGA and small intestine submucosa-blended nanofibrous membranes and their biocompatibility for wound healing

In recent decades, tremendous research has focused on the production of nanoscale fibers using synthetic polymers, with the goal of fabricating nanofibrous scaffolds for wound healing. However, the hydrophobicity of such polymers typically hinders attachment and proliferation of the cells. In this study, we combined poly-d,l-lactide-co-glycolide (PLGA) and small intestine submucosa (SIS) to fabricate blended nanofibers for wound healing by electrospinning. PLGA and SIS were dissolved in 1,1,1,3,3,3-hexafluoro isopropanol to produce different weight ratios of PLGA/SIS-blended nanofibrous membranes (NFM). Physicochemical characterization of the electrospun NFM was performed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, water contact angle analysis, degradation test and tensile testing. The PLGA/SIS-blended NFM showed improved hydrophilicity and tensile strength. Better infiltration, attachment and proliferation of rat granulation fibroblasts of PLGA/SIS-blended NFMs compared to PLGA NFMs were identified by morphological differences determined by SEM and a water-soluble tetrazolium salt assay kit. Based on our results, the PLGA/SIS blended NFMs were found to be suitable for use as a potential material for wound dressing.     

LED-UV grafting of vinylsulfone dyes onto photo-oxidized wool fabrics

Photografting coloration of wool was carried out under UV-LED irradiation at room temperature using aqueous vinylsulfone dye solution containing vinylsulfonic acid as a comonomer. UV-LED irradiation of the 395 nm emission is more energy efficient, less damaging to the dyes, and much safer to human eyes compared with polychromatic mercury UV lamps. However, in case of the UV-LED lamps, the wool needs to be photo-oxidized either by UV/ozone or polychromatic UV irradiation before the dye photografting. The surface treatments increased the sulfur and oxygen contents in the modified wool surfaces. While the optimally photografted wool fabrics under the UV-LED lamp yielded a K/S value of 9.9, the K/S of the grafted wool increased to 25.2 and 13.6 after the UV/Ozone or polychromatic UV preoxidation at UV energies of 10.6 J/cm² and 25 J/cm² respectively. The color fastness properties of the photografted fabrics were far better than with those of the conventionally reactive-dyed fabrics, implying that the high-molecular-weight photografted dyes seemed to be more durable than the low-molecular dyes.     

Numerical analysis of injection molding for the Syringe Barrel with optimum design and processing condition

The numerical analysis was performed to predict the potential problem, often occurring during the manufacturing process of the disposable medical device of a great volume. The cavity filling analyses were performed for the new design of the 3cc Syringe Barrel using polypropylene(PP1), and a new nucleated polypropylene(PP2) material for better clarity. These analyses have been performed for different processing conditions as well as various wall thickness designs for both materials. With the nucleated material, only the original wall thickness design has been studied at two different processing conditions for comparison purpose. This study was conducted to investigate the optimum part design and processing condition for two different materials. The most desirable design was selected with Design 3 for material utilization and reduced flow stresses by comparing the field results. The new nucleated polypropylene provided slightly better product quality and processing.