Zirconium-Modified Activated Sludge as a Low-Cost Adsorbent for Phosphate Removal in Aqueous Solution

A highly effective zirconium-modified activated sludge (Zr(IV)-AS) adsorbent was prepared from activated sludge and applied to remove phosphate from aqueous solutions by batch and column experiments. Characterized results revealed that zirconium was successfully loaded onto the activated sludge (AS), and the specific surface area and pore volume were substantially improved after zirconium loading on the AS. Zr(IV)-AS exhibited a high adsorption affinity for phosphate and the maximum adsorption amount was 27.55 mg P·g^?1 at 25 °C. Adsorption isotherms of phosphate could be described by the Langmuir model, and the adsorption kinetics were well described by the pseudo-second-order model. Phosphate adsorption on Zr(IV)-AS increased monotonically with decreasing solution pH. The presence of SO₄^2? in water resulted in slightly decreased phosphate adsorption on the adsorbent even at a high concentration (25 mmol/L), and a greater influence of HCO₃^? on adsorption could be ascribed to the increased solution pH with the addition of the HCO₃^?. Column adsorption experimental results showed that the adsorbent has excellent phosphate adsorption properties and that the effluent can meet the requirement of phosphorus in the national wastewater discharge standard of China. Phosphate-saturated Zr(IV)-AS can be effectively desorbed in 0.1 mol L^?1 NaOH solution, and the regenerated adsorbent still possessed the high capacity. The adsorption between the adsorbent and the phosphate is due to the electrostatic interaction and anionic exchange at the surface of the Zr(IV)-AS. Furthermore, this approach provides a possibility of treating wastewater with waste and has the potential for industrial applications for the removal of phosphate from wastewater.     

Evaluation of palygorskite for remediation of Cd-polluted soil with different water conditions

Purpose

The study aimed at comparing the effects of different water managements on soil Cd immobilization using palygorskite, which was significant for the selection of reasonable water condition.

Materials and methods

Field experiment was taken to discuss the in situ remediation effects of palygorskite on Cd-polluted paddy soils, under different water managements, using a series of variables, including pH and extractable Cd in soils, plant Cd, enzyme activity, and microorganism number in soils.

Results and discussion

In control group, the pH in continuous flooding was the highest under three water conditions, and compared to conventional irrigation, continuous flooding reduced brown rice Cd by 37.9%, and brown rice Cd in wetting irrigation increased by 31.0%. In palygorskite treated soils, at concentrations of 5, 10, and 15 g kg^?1, brown rice Cd reduced by 16.7, 44.4, and 55.6%; 13.8, 34.5, and 44.8%; and 13.1, 36.8, and 47.3% under continuous flooding, conventional irrigation, and wetting irrigation (p < 0.05), respectively. The enzyme activity and microbial number increased after applying palygorskite to paddy soils.

Conclusions

Continuous flooding was a good candidate as water management for soil Cd stabilization using palygorskite. Rise in soil enzyme activity and microbial number proved that ecological function regained after palygorskite application.

     

Fijian adolescents’ understanding and evaluation of climate change: Implications for enabling effective future adaptation

Pacific Island countries are particularly vulnerable to future manifestations of climate change due to high coastline‐to‐land‐area ratios, and high dependence of inhabitants on natural ecosystems. While everyone in the Pacific Islands should participate in climate change adaptation activities, it is the young people, given they are the generation likely to not only bear the burden of climate change, but to lead and live effective climate change adaptation activities and strategies specific to their region, the involvement of youth is critical. Pacific Island youths are often marginalised within traditional decision‐making hierarchies, therefore they are typically excluded from participating in meaningful discussions at community and government levels. Discussions were held with 30 adolescents aged 14–18 years in Fiji to explore knowledge and experiences regarding climate change. Participants revealed their dismay at their inability to talk to family – who they consider are not doing enough – about what they consider as appropriate responses to climate change, recommending the help of an authoritative outsider who could speak to their community leaders and family. Discussions also revealed that Fijian youth could not distinguish between changes in the climate and normal weather events, attesting to the importance of climate‐change education and awareness‐raising efforts within the Pacific Islands more generally.     

Potential,constraints and applications of in vitro methods in improving grain legumes

Grain legumes, the important constituents of sustainability‐based cropping systems and energy‐limited vegetarian diets have long been the subject of scientific research. Tremendous technological strides were made in the so‐called orphan crops, in terms of both varietal improvement and generation of basic information. Despite recalcitrancy and high genotype dependency, in vitro culture techniques such as organogenesis, in vitro mutagenesis, embryo rescue and in vitro gene transfer have been deployed for improvement of several grain legumes and these played an important role in introgression of desirable genes from related and distant species and creation of additional genetic variability. Stable and reproducible regeneration protocols resulted in the development of genetically modified chickpea, pigeon pea, cowpea, mungbean, etc., while embryo rescue was deployed successfully for recovery of interspecific recombinants, a few of them exploited for the development of commercial cultivars. Nevertheless, doubled haploidy witnessed limited success and protoplast regeneration and in vitro mutagenesis remained of academic interest. The present review focuses on the progress, achievements, constraints and perspectives of using in vitro technology in grain legume improvement.     

Capturing genetic variability and selection of traits for heat tolerance in a chickpea recombinant inbred line (RIL) population under field conditions

Chickpea is the most important pulse crop globally after dry beans. Climate change and increased cropping intensity are forcing chickpea cultivation to relatively higher temperature environments. To assess the genetic variability and identify heat responsive traits, a set of 296 F_8–9 recombinant inbred lines (RILs) of the cross ICC 4567 (heat sensitive) × ICC 15614 (heat tolerant) was evaluated under field conditions at ICRISAT, Patancheru, India. The experiment was conducted in an alpha lattice design with three replications during the summer seasons of 2013 and 2014 (heat stress environments, average temperature 35 °C and above), and post-rainy season of 2013 (non-stress environment, max. temperature below 30 °C). A two-fold variation for number of filled pods (FPod), total number of seeds (TS), harvest index (HI), percent pod setting (%PodSet) and grain yield (GY) was observed in the RILs under stress environments compared to non-stress environment. A yield penalty ranging from 22.26% (summer 2013) to 33.30% (summer 2014) was recorded in stress environments. Seed mass measured as 100-seed weight (HSW) was the least affected (6 and 7% reduction) trait, while %PodSet was the most affected (45.86 and 44.31% reduction) trait by high temperatures. Mixed model analysis of variance revealed a high genotypic coefficient of variation (GCV) (23.29–30.22%), phenotypic coefficient of variation (PCV) (25.69–32.44%) along with high heritability (80.89–86.89%) for FPod, TS, %PodSet and GY across the heat stress environments. Correlation studies (r = 0.61–0.97) and principal component analysis (PCA) revealed a strong positive association among the traits GY, FPod, VS and %PodSet under stress environments. Path analysis results showed that TS was the major direct and FPod was the major indirect contributors to GY under heat stress environments. Therefore, the traits that are good indicators of high grain yield under heat stress can be used in indirect selection for developing heat tolerant chickpea cultivars. Moreover, the presence of large genetic variation for heat tolerance in the population may provide an opportunity to use the RILs in future-heat tolerance breeding programme in chickpea.     

回交高代选择导入系的纹枯病抗性与抗旱性的遗传重叠研究

利用来自抗旱性较好的供体亲本（BG300和BG304）、具有两种遗传背景（IR64和特青）的水稻高代回交（BC2）抗旱选择导入系，通过人工接种的方法鉴定纹枯病抗性，考察纹枯病抗性与抗旱性之间可能存在的遗传重叠。通过与受体亲本的纹枯病抗性表现比较发现，具有特青背景的抗旱选择导入系倾向于纹枯病抗性的降低，而IR64背景的抗旱选择导入系则倾向于纹枯病抗性的增强。基于基因型与表型的方差分析共鉴定到6个与纹枯病抗性相关的位点，其中QSbr6在不同供体和背景的两个群体中分别检测到，而QSbr10则在同一供体的两个遗传背景下均检测到；有3个位点（QSbr6、QSbr8和QSbr10）与同一群体中检测到的抗旱性位点位置相近，很可能是两种抗性重叠的遗传基础。尽管方差分析的方法在选择导入系的非选择目标性状相关位点的鉴定中存在相当程度的偏低估计，本研究所检测到的纹枯病抗性位点，特别是那些与抗旱性重叠位点的分子标记以及相关的抗性株系仍将为进一步的水稻纹枯病抗性和抗旱性的多抗性育种和深入的遗传重叠研究提供有用的信息和材料。     

Effects of inbreeding on nodal root system morphology and architecture of white clover (<Emphasis Type="Italic">Trifolium repens</Emphasis> L.)

Plants of white clover (Trifolium repens L.) cultivar Crau, a self-fertile Crau genotype, and nine generations of inbred progeny were raised in sand culture in a glasshouse experiment. Digital images of the root systems were made and root morphological characteristics were determined on all the plants. Root architectural parameters were measured on the Crau parent and the S₁, S₄, S₆, and S₉ inbred lines. The clover roots became shorter and thicker with inbreeding but the number of root tips per plant was unchanged. Root architecture (branching pattern) was largely unaffected by inbreeding. It is concluded that inbreeding white clover will lead to shorter, thicker roots, and reduced nutrient uptake efficiency compared with the parent clover. The degree to which these deleterious traits are overcome during the development of F₁ hybrids needs to be determined.     

The inheritance of chemical phenotype in <Emphasis Type="Italic">Cannabis sativa</Emphasis> L. (III): variation in cannabichromene proportion

The mechanism that controls the proportion of cannabichromene (CBC), a potential pharmaceutical, in the cannabinoid fraction of Cannabis sativa L. is explored. As with tetrahydrocannabinol (THC) and cannabidiol (CBD), CBC is an enzymatic conversion product of the precursor cannabigerol (CBG). CBC is reported to dominate the cannabinoid fraction of juveniles and to decline with maturation. This ontogeny was confirmed in inbred lines with different mature chemotypes. A consistent CBC presence was found in early leaves from a diverse clone collection, suggesting that CBC synthase is encoded by a fixed locus. Morphological variants possessing a ‘prolonged juvenile chemotype’ (PJC), a substantial proportion of CBC persisting up to maturity, are presented. PJC is associated with a reduced presence of floral bracts, bracteoles, and capitate-stalked trichomes. Genetic factors causing these features were independent of the allelic chemotype locus B that was previously postulated and regulates THC and CBD synthesis and CBG accumulation. In contrast to previously described Cannabis chemotypes, the cannabinoid composition of PJCs showed plasticity in that reduced light levels increased the CBC proportion. The ability of PJC plants to enable the production of pharmaceutical raw material with high CBC purity is demonstrated.     

Production of mutants with high cold tolerance in spring canola (<Emphasis Type="Italic">Brassica napus</Emphasis>)

A major factor affecting spring canola (Brassica napus) production in Canada is killing frosts during seedling development in the spring and seed maturation in the fall. The objective of this study was to explore the possibility of producing spring canola lines with mutations that have altered biochemical pathways that increase cold tolerance. The approach was to generate UV point mutations in cultured microspores followed by chemical in vitro selection of individual mutant microspores or embryos resulting in measurable alterations to various biochemical pathways with elevated levels of key defense signaling molecules such as, salicylic acid (SA), p-Fluoro-d,l-Phenyl Alanine (FPA), and jasmonic acid (JA). In addition, since proline (Pro) is known to protect plant tissues in the cold-induced osmotic stress pathway, mutants that overproduce Pro were selected in vitro by using three Pro analogues: hydroxyproline (HP), azetidine-2-carboxylate (A2C); and, 3,4-dehydro-d,l-proline (DP). Of the 329 in vitro selected mutant embryos produced, 74 were identified with significant cold tolerance compared to their donor parents through indoor freezer tests at −6°C, and 19 had better winter field survival than winter canola checks. All chemically selected mutant doubled haploids with increased cold tolerance compared well with parent lines for all seed quality and agronomic parameters. Development of increased frost tolerant cultivars should allow for spring canola to be produced in western Canada without compromising seed quality.     

DNA profiling and genetic diversity of Korean soybean (<Emphasis Type="Italic">Glycine max</Emphasis> (L.) Merrill) landraces by SSR markers

Approximately 7,000 accessions of Korean soybean (Glycine max (L.) Merrill) landraces, largely composed of three collections, the Korea Atomic Energy Research Institute’s soybean (KAS), the Korean Crop Experiment Station’s soybean (KLS) and the Korean Agricultural Development and Technology Center’s soybean (KADTC) collections, have been conserved at the Rural Development Administration (RDA) genebank in Korea. The accessions within collections were classified based on their traditional uses such as sauce soybean (SA), sprouted soybean (SP), soybean for cooking with rice (SCR), and OTHERS. A total of 2,758 accessions of Korean soybean landraces were used to profile and to evaluate genetic structure using six SSR loci. A total of 110 alleles were revealed by at the six SSR loci. The number of alleles per SSR locus ranged from 9 to 39 in Satt187 and Satt_074, respectively. The number of alleles ranged from 87 in the KADTC collection to 96 in the KLS collection, and from 63 in the SCR group to 95 in the SP group. Nei’s average genetic diversity ranged from 0.68 to 0.70 across three collections, and 0.64 to 0.69 across the usage groups. The average between-group differentiation (G _st) was 0.9 among collections, and 4.1 among the usage groups. The similar average diversity among three collections implies that the genetic background of the three collections was quite similar or that there were a large number of duplicate accessions in three collections. The selection from the four groups classified based upon usage may be a useful way to select accessions for developing a Korean soybean landrace core collection at the RDA genebank. DNA profile information of accessions will provide indications of redundancies or omissions and aid in managing the soybean collection held at the RDA genebank. The information on diversity analysis could help to enlarge the genetic diversity of materials in breeding programs and could be used to develop a core collection.