超高效液相色谱-串联质谱法测定柑橘中的草甘膦及其代谢物残留

本研究首次建立了一种超高效液相色谱-串联质谱法(UHPLC-MS/MS)同时测定柑橘中草甘膦及其代谢物N-乙酰草甘膦?氨甲基磷酸(AMPA)和N-乙酰AMPA?样品经过0.5%甲酸水提取, 以十八烷基硅烷键合硅胶柱(C18)净化, 利用水和200 mmol/L碳酸氢铵溶液(含0.1%氨水)作为流动相梯度洗脱, 在多反应监测模式下定量分析?结果表明, 草甘膦及其代谢物在0.05~1 mg/kg范围内线性关系良好, 相关系数均大于0.99; 草甘膦及其3个代谢物在柑橘全果和果肉基质中3个加标水平下回收率为 70.5%~109.5%, 相对标准偏差(RSD)为0.6%~10.1%, 定量限为0.05 mg/kg?本方法的前处理样品无需衍生, 简便?快捷?高效?准确可靠, 可用于柑橘中草甘膦及其代谢物N-乙酰草甘膦?AMPA和N-乙酰AMPA的定量检测?     

Challenges and opportunities of unmanned aerial vehicles as a new tool for crop pest control

The application of pesticides is not simply delivering chemicals to the target area. It also involves considering the negative aspects and developing strategies to deal with them during the application process, to ensure the maximization of pesticides use efficiency and the maintenance of the ecosystem. Unmanned aerial vehicle (UAV) sprayers demonstrate unique advantages compared to traditional ground sprayers, particularly in terms of maneuverability and labor intensity reduction, showed great potential for chemical application in pest control. It is undeniable that there exist challenges in the practice of UAV spraying, such as higher potential risks of pesticide drift or pathogen transmission, uncertainty canopy deposition for different crops, and unexpected leaf breakage induced by downwash flow. Maximizing the utilization of downwash flow while avoiding lateral air movement outside the intended target crop area is a major issue for chemical application with UAV sprayers, particularly in light of the increasingly apparent consensus on the need for enhanced environmental protection during the chemical application process. It must be considered that the operation strategy in different scenarios and for different crop targets is not the same, unique requirements should be given on nozzle atomization, flight parameters, adjuvants and aircraft types in specific working situations. In future, the implementation of spray drift prediction, technical procedures development, and other solutions aimed at reducing pesticide drift and improving deposition quality, is expected to promote the adoption of UAV sprayers by more farmers. © 2023 Society of Chemical Industry.     

猫源支气管败血波氏菌的分离与鉴定

支气管败血波氏菌是引起猫呼吸道疾病的主要病原之一,而对猫源支气管败血波氏菌的分离鉴定目前国内鲜有报道。本研究对上海市1例有咳嗽症状的德文猫鼻拭子样品进行呼吸系统相关病原PCR检测,并对鼻拭子样品进行细菌分离培养,对分离菌株采用K-B纸片法进行药敏试验,同时检测分离菌株对小鼠的致病性。结果显示：猫杯状病毒、猫疱疹病毒、猫衣原体、猫支原体均为阴性,支气管败血波氏菌为阳性,并分离到1株支气管败血波氏菌;分离菌株对头孢拉定、氨苄西林、强力霉素等9种抗生素耐药,对阿莫西林、卡那霉素、氟哌酸、复方新诺明、美罗培南等15种抗生素敏感;用分离菌株接种ICR小鼠,发现小鼠出现精神沉郁症状,但未出现死亡。结果表明：上海市猫群中存在支气管败血波氏菌感染,需关注免疫力低下人群被感染的风险;分离株对小鼠致病力不强,但对首选治疗支气管败血波氏菌病的强力霉素耐药,建议选用敏感药物进行防治。本研究为猫源支气管败血波氏菌病的诊断与防治提供了参考。     

高粱不同外植体离体培养

不同材料愈伤组织诱导培养结果表明，幼穗，茎尖和成熟胚的最高出愈率达１００％，子粒达９３％，幼胚仅为７４％。幼穗不但出愈率高，且愈伤组织胚性状况好，分化出苗率高。幼胚出愈率虽低，但其分化率明显主茎尖，成熟胚和子粒了的分化率。     

Sintering of Magnetite Concentrates Without Carbon

With the goal of the sintering of magnetite concentrates without carbon,the effect of quality,inert atmosphere and Fe_3O_4 addition on microwave sintering of magnetite concentrates is studied.It is shown that: With the same basicity(CaO/SiO_2=2.5) and microwave heating condition(1000W,2.45GHz,20min),the centre temperature decreaseds with a increasing sample mass;There is no great difference between with and without inert atmosphere in microwave sintering of magnetite in a same microwave heating condition.When 100g sample(CaO/SiO_2=2.5) is heated by microwave irradiation(1000W,2.45GHz,20min),the more Fe_3O_4 is added,the less liquid phase is produced,which is bad for microwave sintering of magnetite concentrate.     

Phase Transformation Diffusion Bonding of Titanium Alloy to Stainless Steel

Jointing of titanium alloy and stainless steel is very often in the fields like aviation, chemical plants etc. The combination of materials has the advantages of both titanium alloy and stainless steel and will reduce the consumption of titanium resource. The phase transformation diffusion bonding of TA17 titanium alloy to 0CriSNigTi stainless steel are carried out on Gleeble - 1500D. The effcet of maximum thermal cycle temperature, the tensile strength, the fracture surface and microstruture of the joints are investigated. The results show that TiFe and TiFe2 intermetallics and some solid solutions are formed along the interface, when maximum thermal cycle temperature increase, the area proportion of intermetallics in the fracture surface increase, which are detrimental to the mechanical properties of the transition joints.     

Design of Data Acquisition System for Vehicle Based on CAN Bus

To the question that a meter is correspond with a set of lead and a sensor,this paper presents a design of data acquisition system for vehicle based on CAN bus.In this way,the combinatorial instrument is only connected by a bus unit.Author introduces the data acquisition structure chart and the CAN interface,analyzes the software by program flow chart,and shows it's application for vehicle virtual instrument.A method of calculating vehicle speed,engine rotate speed and the course of development mileage are also given.     

山西地膜棉花高产优质综合农艺措施数学模型的研究

本文采用五因素五水平二次回归旋转设计的方法，研究了山西不同生态棉区皮棉产量与密度、氮、磷、钾施肥量及化控次数（用量）关系的数学模型。分析了不同因素的影响效应，明确了各栽培措施的主次。通过模拟进优待选了不同产量等级的优化农艺措施组合方案，为不同生态棉区制定棉花高产优质决策方案提供依据。     

喷雾机器人远程控制系统的设计与试验研究

结合喷雾机器人作业环境的要求,开发出基于客户端/服务器模式的远程控制平台.该平台实现了通过无线网络实时传输各类数据和控制命令,客户端再现了机器人的工作环境和状态.在此基础上进行了系统性能测试和轨迹测试.试验结果表明:为了保证良好的操控性,机器人所处区域信号强度必须大于30%,操作者根据反馈信息判断机器人是否偏离预定路径,并在偏离时给予有效的纠正,为解决喷雾机器人重喷、漏喷的问题提供了一种方法.